[sudo] password for ms: [ 0.459756] usbcore: registered new interface driver usbfs [ 0.459763] usbcore: registered new interface driver hub [ 0.459781] usbcore: registered new device driver usb [ 0.644889] usbcore: registered new interface driver usbserial_generic [ 0.644897] usbserial: USB Serial support registered for generic [ 0.926318] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.926320] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.926322] usb usb1: Product: EHCI Host Controller [ 0.926323] usb usb1: Manufacturer: Linux 5.4.10-rt5-MANJARO ehci_hcd [ 0.926324] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.928077] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.928079] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.928080] usb usb2: Product: xHCI Host Controller [ 0.928081] usb usb2: Manufacturer: Linux 5.4.10-rt5-MANJARO xhci-hcd [ 0.928082] usb usb2: SerialNumber: 0000:00:14.0 [ 0.931672] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 0.931674] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.931675] usb usb4: Product: xHCI Host Controller [ 0.931676] usb usb4: Manufacturer: Linux 5.4.10-rt5-MANJARO xhci-hcd [ 0.931677] usb usb4: SerialNumber: 0000:00:14.0 [ 0.946394] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.946397] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.946399] usb usb3: Product: EHCI Host Controller [ 0.946401] usb usb3: Manufacturer: Linux 5.4.10-rt5-MANJARO ehci_hcd [ 0.946402] usb usb3: SerialNumber: 0000:00:1d.0 [ 1.256336] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.259668] usb 2-7: new full-speed USB device number 2 using xhci_hcd [ 1.276321] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.401019] usb 2-7: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping [ 1.401027] usb 2-7: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping [ 1.401037] usb 2-7: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01 [ 1.401042] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.403511] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.403522] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.423753] usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.423761] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.526354] usb 2-8: new high-speed USB device number 3 using xhci_hcd [ 1.696618] usb 2-8: New USB device found, idVendor=04f2, idProduct=b59d, bcdDevice=10.18 [ 1.696627] usb 2-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.696631] usb 2-8: Product: Chicony USB2.0 Camera [ 1.696635] usb 2-8: Manufacturer: Chicony Electronics Co.,Ltd. [ 1.696639] usb 2-8: SerialNumber: 200901010001 [ 1.826254] usb 2-9: new low-speed USB device number 4 using xhci_hcd [ 1.977397] usb 2-9: New USB device found, idVendor=047d, idProduct=2048, bcdDevice= 6.00 [ 1.977406] usb 2-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.977410] usb 2-9: Product: Kensington Eagle Trackball [ 1.977414] usb 2-9: Manufacturer: Primax [ 1.995002] usbcore: registered new interface driver usbhid [ 1.995006] usbhid: USB HID core driver [ 1.997348] input: Primax Kensington Eagle Trackball as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.0/0003:047D:2048.0001/input/input9 [ 1.997421] hid-generic 0003:047D:2048.0001: input,hidraw0: USB HID v1.11 Mouse [Primax Kensington Eagle Trackball] on usb-0000:00:14.0-9/input0 [ 12.351800] usbcore: registered new interface driver btusb [ 12.833848] input: Chicony USB2.0 Camera: Chicony as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input24 [ 12.835962] usbcore: registered new interface driver uvcvideo
I have tried to reboot several times and each time the keyboard responds. No idea what changed. Let's hope it continues
Wiki GitLab How to search the forum Before posting a new thread, try searching the forum to see if your question has already been asked. Searching is easy - click on the magnifying glass icon in the top-right corner, and type one or more keywords. Threads and posts containing that keyword will then be shown. For example, if you’re posting about a Dell XPS 15 9560, try searching for “Dell 9560” or “XPS 9560”. It’s very likely that the issues you’re having will already be under discussion! If looking for something very specific, you could also try a search engine and add the site to the search options, e.g. site:archived.forum.manjaro.org <search_term>. RE: Cannot use keyboard ( after upgrade) Fabby 8h I have tried to reboot several times and each time the keyboard responds. No idea what changed. Let's hope it continues Can you add an inxi --full --verbosity=7 to your last answer, please? created 8h last reply 6h 2 replies 2 views 2 users biddie Fabby biddie 7h inxi --full --verbosity=7 System: Host: ms-pc Kernel: 5.4.10-rt5-MANJARO x86_64 bits: 64 compiler: gcc v: 9.2.0 Desktop: KDE Plasma 5.17.5 tk: Qt 5.14.0 wm: kwin_x11 dm: SDDM Distro: Manjaro Linux Machine: Type: Laptop System: Notebook product: W54_55SU1,SUW v: N/A serial: <root required> Chassis: type: 9 serial: <root required> Mobo: Notebook model: W54_55SU1,SUW serial: <root required> BIOS: American Megatrends v: 4.6.5 date: 09/07/2015 Battery: ID-1: BAT0 charge: 47.5 Wh condition: 47.5/62.2 Wh (76%) volts: 12.8/11.1 model: Notebook BAT type: Li-ion serial: 0001 status: Full Memory: RAM: total: 3.76 GiB used: 2.68 GiB (71.2%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. CPU: Topology: Dual Core model: Intel Core i3-4000M bits: 64 type: MT MCP arch: Haswell rev: 3 L2 cache: 3072 KiB bogomips: 19160 Speed: 898 MHz min/max: 800/2400 MHz Core speeds (MHz): 1: 1335 2: 1264 3: 1306 4: 1388 Flags: abm acpi aperfmperf apic arat arch_perfmon avx avx2 bmi1 bmi2 bts clflush cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est f16c flexpriority flush_l1d fma fpu fsgsbase fxsr ht ibpb ibrs invpcid invpcid_single lahf_lm lm mca mce md_clear mmx monitor movbe msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts rdrand rdtscp rep_good sdbg sep smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx vnmi vpid xsave xsaveopt xtopology xtpr Graphics: Device-1: Intel 4th Gen Core Processor Integrated Graphics vendor: CLEVO/KAPOK driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0416 Display: x11 server: X.Org 1.20.7 driver: intel unloaded: modesetting alternate: fbdev,vesa compositor: kwin_x11 resolution: 1366x768~60Hz OpenGL: renderer: Mesa DRI Intel Haswell Mobile v: 4.5 Mesa 19.3.2 compat-v: 3.0 direct render: Yes Audio: Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio vendor: CLEVO/KAPOK driver: snd_hda_intel v: kernel bus ID: 00:03.0 chip ID: 8086:0c0c Device-2: Intel 8 Series/C220 Series High Definition Audio vendor: CLEVO/KAPOK driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:8c20 Sound Server: ALSA v: k5.4.10-rt5-MANJARO Network: Device-1: Intel Wireless 7260 driver: iwlwifi v: kernel port: f040 bus ID: 02:00.0 chip ID: 8086:08b1 IF: wlp2s0 state: up mac: 76:c2:2c:a7:7a:2a IP v4: 192.168.1.23/24 type: dynamic noprefixroute scope: global broadcast: 192.168.1.255 IP v6: fe80::c184:26e5:2469:f7ba/64 type: noprefixroute scope: link Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: CLEVO/KAPOK driver: r8168 v: 8.047.02-NAPI port: e000 bus ID: 03:00.1 chip ID: 10ec:8168 IF: enp3s0f1 state: down mac: 80:fa:5b:35:53:bb WAN IP: 18.104.22.168 Drives: Local Storage: total: 465.76 GiB used: 33.92 GiB (7.3%) ID-1: /dev/sda vendor: Seagate model: ST500LM021-1KJ152 size: 465.76 GiB speed: 6.0 Gb/s rotation: 7200 rpm serial: W62F5BYH rev: SDM1 scheme: MBR Optical-1: /dev/sr0 vendor: TSSTcorp model: CDDVDW SU-208HB rev: TC00 dev-links: cdrom Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running RAID: Message: No RAID data was found. Partition: ID-1: / size: 29.61 GiB used: 25.51 GiB (86.2%) fs: ext4 dev: /dev/sda1 label: N/A uuid: 397b93e9-b614-4965-9d77-cec1e1402088 ID-2: /home size: 420.02 GiB used: 8.31 GiB (2.0%) fs: ext4 dev: /dev/sda3 label: N/A uuid: 6c735e11-9405-426f-811f-a7621d242b43 ID-3: swap-1 size: 7.81 GiB used: 97.8 MiB (1.2%) fs: swap dev: /dev/sda2 label: N/A uuid: 354f40fc-1a01-4f35-9691-6d31b7f8985c Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Intel ports: 6 rev: 2.0 speed: 480 Mb/s chip ID: 8087:8008 Hub: 2-0:1 info: Full speed (or root) Hub ports: 14 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Device-1: 2-7:2 info: Intel type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 8087:07dc Device-2: 2-8:3 info: Chicony Chicony USB2.0 Camera type: Video driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 04f2:b59d serial: 200901010001 Device-3: 2-9:4 info: Kensington Orbit Trackball with Scroll Ring type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 047d:2048 Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 3-1:2 info: Intel ports: 8 rev: 2.0 speed: 480 Mb/s chip ID: 8087:8000 Hub: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: System Temperatures: cpu: 52.0 C mobo: N/A Fan Speeds (RPM): N/A Info: Processes: 197 Uptime: 10h 03m Init: systemd v: 242 Compilers: gcc: 9.2.0 Shell: bash v: 5.0.11 running in: yakuake inxi: 3.0.37
Well, the problem goes on. I had several days with no problem then it started again. The other day all was working. I was using Firefox. Then I switched to Chrome and...the keyboard stopped responding. Worked after turning down and booting. Today, all was going well untill I opened Gmail. The keyboard stopped responding. I stopped/booted several times, same problem. So I am again asking for help.
Kernel 4.19.97-1 so changing kernel didn't help.
Thanks for your help
Have you tried an external keyboard yet? The only thing I can think of now is the keyboard itself malfunctioning...
I wouldn't know how to fit another keyboard
Go to a a friend, borrow an external keyboard, plug it into a USB slot, try.
I doubt if it is the keyboard. After several day without troubles, it was functioning without trouble until I tried to write on Gmail and....I could not. Just rebooted and it works again
Well, finally it had nothing to do with the keyboard. I did an update the other day and it has not recurred. I don;t know what was causing it but now it works well.
Thank you all for your help
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.