Can't access secondary GPU (NVIDIA non-free driver), bumblebee

[devswapt]

I have a laptop with intergrated (Intel) and dedicated (NVIDIA 940MX) video cards.
I followed the steps that are in Configure NVIDIA (non-free) settings and load them on Startup wiki article.
I install the non-free driver using: sudo mhwd -a pci nonfree 0300, then check with mhwd -li and it was installed with no problem.
But when I try to open the NVIDIA settings ( sudo optirun -b none nvidia-settings -c :8) it shows this error (using systemctl status):

dic 01 16:40:54 devswap-pc bumblebeed[593]: [XORG] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
dic 01 16:40:54 devswap-pc bumblebeed[593]: [XORG] (EE) NVIDIA(0): Failing initialization of X screen
dic 01 16:40:54 devswap-pc bumblebeed[593]: [XORG] (EE) Screen(s) found, but none have a usable configuration.
dic 01 16:40:54 devswap-pc bumblebeed[593]: [XORG] (EE)
dic 01 16:40:54 devswap-pc bumblebeed[593]: [XORG] (EE) no screens found(EE)
dic 01 16:40:54 devswap-pc bumblebeed[593]: [XORG] (EE)
dic 01 16:40:54 devswap-pc bumblebeed[593]: [XORG] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional infor>
dic 01 16:40:54 devswap-pc bumblebeed[593]: [XORG] (EE)
dic 01 16:40:54 devswap-pc bumblebeed[593]: [XORG] (EE) Server terminated with error (1). Closing log file.
dic 01 16:40:54 devswap-pc bumblebeed[593]: X did not start properly

and this is the Xorg.8.log:

[  1837.981] (II) LoadModule: "glx"
[  1837.981] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[  1837.986] (II) Module glx: vendor="NVIDIA Corporation"
[  1837.986] 	compiled for 1.6.99.901, module version = 1.0.0
[  1837.986] 	Module class: X.Org Server Extension
[  1837.986] (II) NVIDIA GLX Module  430.64  Sun Oct 27 11:10:22 UTC 2019
[  1837.986] (II) LoadModule: "nvidia"
[  1837.986] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  1837.986] (II) Module nvidia: vendor="NVIDIA Corporation"
[  1837.986] 	compiled for 1.6.99.901, module version = 1.0.0
[  1837.986] 	Module class: X.Org Video Driver
[  1837.986] (II) LoadModule: "mouse"
[  1837.986] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[  1837.986] (II) Module mouse: vendor="X.Org Foundation"
[  1837.986] 	compiled for 1.20.0, module version = 1.9.3
[  1837.986] 	Module class: X.Org XInput Driver
[  1837.986] 	ABI class: X.Org XInput driver, version 24.1
[  1837.986] (II) LoadModule: "kbd"
[  1837.986] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[  1837.987] (II) Module kbd: vendor="X.Org Foundation"
[  1837.987] 	compiled for 1.20.3, module version = 1.9.0
[  1837.987] 	Module class: X.Org XInput Driver
[  1837.987] 	ABI class: X.Org XInput driver, version 24.1
[  1837.987] (II) NVIDIA dlloader X Driver  430.64  Sun Oct 27 11:10:43 UTC 2019
[  1837.987] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  1837.987] (II) Loading sub module "fb"
[  1837.987] (II) LoadModule: "fb"
[  1837.987] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1837.987] (II) Module fb: vendor="X.Org Foundation"
[  1837.987] 	compiled for 1.20.5, module version = 1.0.0
[  1837.987] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1837.987] (II) Loading sub module "wfb"
[  1837.987] (II) LoadModule: "wfb"
[  1837.987] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  1837.987] (II) Module wfb: vendor="X.Org Foundation"
[  1837.987] 	compiled for 1.20.5, module version = 1.0.0
[  1837.987] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1837.987] (II) Loading sub module "ramdac"
[  1837.987] (II) LoadModule: "ramdac"
[  1837.987] (II) Module "ramdac" already built-in
[  1837.988] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  1837.988] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[  1837.988] (==) NVIDIA(0): RGB weight 888
[  1837.988] (==) NVIDIA(0): Default visual is TrueColor
[  1837.988] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  1837.988] (**) NVIDIA(0): Option "UseEDID" "false"
[  1837.988] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP"
[  1837.988] (**) NVIDIA(0): Enabling 2D acceleration
[  1837.988] (**) NVIDIA(0): ConnectedMonitor string: "DFP"
[  1837.988] (**) NVIDIA(0): Ignoring EDIDs
[  1838.833] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please
[  1838.833] (EE) NVIDIA(GPU-0):     check your system's kernel log for additional error
[  1838.833] (EE) NVIDIA(GPU-0):     messages and refer to Chapter 8: Common Problems in the
[  1838.833] (EE) NVIDIA(GPU-0):     README for additional information.
[  1838.833] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
[  1838.833] (EE) NVIDIA(0): Failing initialization of X screen
[  1838.833] (II) UnloadModule: "nvidia"
[  1838.833] (II) UnloadSubModule: "wfb"
[  1838.833] (II) UnloadSubModule: "fb"
[  1838.833] (EE) Screen(s) found, but none have a usable configuration.
[  1838.833] (EE) 
Fatal server error:
[  1838.833] (EE) no screens found(EE) 
[  1838.833] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[  1838.833] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[  1838.833] (EE) 
[  1838.833] (EE) Server terminated with error (1). Closing log file.

dmseg:

[  126.573905] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  430.64  Sun Oct 27 11:26:12 UTC 2019
[  132.317647] NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x53:0x65:2004)
[  132.317709] NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0
[  208.326306] NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x53:0x65:2004)
[  208.326354] NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0
[  236.153901] NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x53:0x65:2004)
[  236.153947] NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0
[  388.643941] NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x53:0x65:2004)
[  388.644044] NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0
[  428.264123] NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x53:0x65:2004)
[  428.264227] NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0
[ 1400.880800] NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x53:0x65:2004)
[ 1400.880906] NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0
[ 1401.746882] NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x53:0x65:2004)
[ 1401.746951] NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0
[ 1449.034719] NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x53:0x65:2004)
[ 1449.034767] NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0
[ 1454.387947] NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x53:0x65:2004)
[ 1454.387996] NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0
[ 1698.508087] NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x53:0x65:2004)
[ 1698.508135] NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0
[ 1699.354870] NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x53:0x65:2004)
[ 1699.354918] NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0
[ 1709.421242] NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x53:0x65:2004)
[ 1709.421343] NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0
[ 1710.267965] NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x53:0x65:2004)
[ 1710.268015] NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0
[ 1717.051108] NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x53:0x65:2004)
[ 1717.051211] NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0
[ 1717.897693] NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x53:0x65:2004)
[ 1717.897795] NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0
[ 1765.761169] NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x53:0x65:2004)
[ 1765.761212] NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0
[ 1773.543566] NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x53:0x65:2004)
[ 1773.543667] NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0
[ 1780.300877] NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x53:0x65:2004)
[ 1780.300981] NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0
[ 1838.519583] NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x53:0x65:2004)
[ 1838.519683] NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0

The NVIDIA card is being detected by the kernel (ìnxi -Fx)

Graphics:  Device-1: Intel vendor: Acer Incorporated ALI driver: i915 v: kernel bus ID: 00:02.0 
           Device-2: NVIDIA GM108M [GeForce 940MX] vendor: Acer Incorporated ALI driver: nvidia v: 430.64 bus ID: 01:00.0
           Display: x11 server: X.Org 1.20.5 driver: intel resolution: 1366x768~60Hz 
           OpenGL: renderer: Mesa DRI Intel HD Graphics 610 (Kaby Lake GT1) v: 4.5 Mesa 19.2.6 direct render: Yes 

I already tried the solutions that are in other topics like Bumblebee wont launch Nvidia driver and Bumblebee error - Could not enable discrete graphics card and even the Arch wiki, but I can't get it work.
And as I can see, getting NVIDIA video cards to work on Linux is a pain in the neck.

Thanks.

[bogdancovaciu]

Chose something else than bumblebee:

Options for Nvidia Optimus graphics

There are several options for hybrid Nvidia graphics, each with their benefits and drawbacks. These options are: bumblebee nvidia-prime optimus-manager nvidia-xrun nouveau driver optimus-switch bumblebee (render offload) -- performance not great (some overhad) (from arch wiki below: "Bumblebee not only has significant performance issues[1][2], but also has no plans to support Vulkan[3]") (*) -- preconfigured, ability to use nvidia gpu “ondemand” with primusrun command -- development seem…

Go with Optimus-Switch for instance.

[devswapt]

I installed optimus-switch, but after reset it gets stuck in the TLP start service, just after the Graphical target reached. In the boot messages I was able to read that there was a problem with the nvidia card, couldn't read it complete due to screen scroll. And I can't switch to tty2, so I think I broke something...
I would prefer to use bumblebee

[nate_x]

I'd be careful when referencing that article. Click on [1] and [2] cited links and you'll see some stories from 2015. I've seen nothing new regarding performance issues so I'm not sure where we stand today. I'd expect to see at least some improvement in 4 years.

[bogdancovaciu]

@nate_x

I'd be careful when referencing that article.

Yes, be careful about it

[nate_x]

Now that I've been careful, I see the second link is a bit newer, 2018ish. I stand corrected. Although, after reading that whole thread I'm still not sure the benchmark is not limited to the refresh-rate (60fps).

[devswapt]

Now I'm stuck in the TLP service when booting, I can't switch to tty2 to fix it...
Any help? Damn, I shooted my foot

[AgentS]

@devswapt

I can't switch to tty2 to fix it.

Boot directly to TTY from grub menu.
At grub menu option, press E to edit, find the line that starts with linux and replace quiet with 3 (number). Press F10 to boot.

In order to help you efficiently (not guessing), you have to provide the error messages and other logs/messages/info.
Read how to do it from TTY

How to change video drivers or configuration and troubleshoot

It is not necessary to change anything if you don't encounter serious display problems, or your applications run successfully. If you believe there is a need to change the video driver or the current configuration, first try to find evidence that there is something wrong. Read the Troubleshooting section bellow. Also make sure you have your system packages properly updated. Preparation If you decide to change the video driver, prepare for.. the worst, before you find yourself in front of a …

[devswapt]

This is the xorg boot log:

[  1837.975] 
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[  1837.975] Build Operating System: Linux Arch Linux
[  1837.975] Current Operating System: Linux devswap-pc 5.3.12-1-MANJARO #1 SMP PREEMPT Thu Nov 21 10:55:53 UTC 2019 x86_64
[  1837.975] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3-x86_64 root=UUID=582d6743-f4d1-45a9-b6d7-4179a6fcc368 rw acpi_rev_override=1 sysrq_always_enabled=1 apparmor=1 security=apparmor resume=UUID=5636b6d6-568d-4706-9545-ff27b52632e7 udev.log_priority=3
[  1837.975] Build Date: 27 October 2019  08:49:23AM
[  1837.975]  
[  1837.975] Current version of pixman: 0.38.4
[  1837.975] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  1837.975] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1837.975] (==) Log file: "/var/log/Xorg.8.log", Time: Sun Dec  1 16:41:51 2019
[  1837.976] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[  1837.976] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[  1837.976] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1837.976] (==) ServerLayout "Layout0"
[  1837.976] (==) No screen section available. Using defaults.
[  1837.976] (**) |-->Screen "Default Screen Section" (0)
[  1837.976] (**) |   |-->Monitor "<default monitor>"
[  1837.976] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[  1837.976] (**) |   |-->Device "Device1"
[  1837.976] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  1837.976] (**) Option "AutoAddDevices" "false"
[  1837.976] (**) Not automatically adding devices
[  1837.976] (==) Automatically enabling devices
[  1837.976] (==) Automatically adding GPU devices
[  1837.976] (==) Automatically binding GPU devices
[  1837.976] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  1837.976] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[  1837.976] 	Entry deleted from font path.
[  1837.976] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[  1837.976] 	Entry deleted from font path.
[  1837.976] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[  1837.976] 	Entry deleted from font path.
[  1837.976] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[  1837.976] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[  1837.976] 	Entry deleted from font path.
[  1837.976] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[  1837.976] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF
[  1837.976] (++) ModulePath set to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules"
[  1837.976] (==) |-->Input Device "<default pointer>"
[  1837.976] (==) |-->Input Device "<default keyboard>"
[  1837.976] (==) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
[  1837.976] (==) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
[  1837.976] (II) Module ABI versions:
[  1837.976] 	X.Org ANSI C Emulation: 0.4
[  1837.976] 	X.Org Video Driver: 24.0
[  1837.976] 	X.Org XInput driver : 24.1
[  1837.976] 	X.Org Server Extension : 10.0
[  1837.977] (--) using VT number 1

[  1837.977] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[  1837.978] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1837.978] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[  1837.981] (--) PCI:*(1@0:0:0) 10de:134d:1025:121a rev 162, Mem @ 0xb3000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128
[  1837.981] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  1837.981] (II) LoadModule: "glx"
[  1837.981] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[  1837.986] (II) Module glx: vendor="NVIDIA Corporation"
[  1837.986] 	compiled for 1.6.99.901, module version = 1.0.0
[  1837.986] 	Module class: X.Org Server Extension
[  1837.986] (II) NVIDIA GLX Module  430.64  Sun Oct 27 11:10:22 UTC 2019
[  1837.986] (II) LoadModule: "nvidia"
[  1837.986] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  1837.986] (II) Module nvidia: vendor="NVIDIA Corporation"
[  1837.986] 	compiled for 1.6.99.901, module version = 1.0.0
[  1837.986] 	Module class: X.Org Video Driver
[  1837.986] (II) LoadModule: "mouse"
[  1837.986] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[  1837.986] (II) Module mouse: vendor="X.Org Foundation"
[  1837.986] 	compiled for 1.20.0, module version = 1.9.3
[  1837.986] 	Module class: X.Org XInput Driver
[  1837.986] 	ABI class: X.Org XInput driver, version 24.1
[  1837.986] (II) LoadModule: "kbd"
[  1837.986] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[  1837.987] (II) Module kbd: vendor="X.Org Foundation"
[  1837.987] 	compiled for 1.20.3, module version = 1.9.0
[  1837.987] 	Module class: X.Org XInput Driver
[  1837.987] 	ABI class: X.Org XInput driver, version 24.1
[  1837.987] (II) NVIDIA dlloader X Driver  430.64  Sun Oct 27 11:10:43 UTC 2019
[  1837.987] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  1837.987] (II) Loading sub module "fb"
[  1837.987] (II) LoadModule: "fb"
[  1837.987] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1837.987] (II) Module fb: vendor="X.Org Foundation"
[  1837.987] 	compiled for 1.20.5, module version = 1.0.0
[  1837.987] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1837.987] (II) Loading sub module "wfb"
[  1837.987] (II) LoadModule: "wfb"
[  1837.987] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  1837.987] (II) Module wfb: vendor="X.Org Foundation"
[  1837.987] 	compiled for 1.20.5, module version = 1.0.0
[  1837.987] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1837.987] (II) Loading sub module "ramdac"
[  1837.987] (II) LoadModule: "ramdac"
[  1837.987] (II) Module "ramdac" already built-in
[  1837.988] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  1837.988] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[  1837.988] (==) NVIDIA(0): RGB weight 888
[  1837.988] (==) NVIDIA(0): Default visual is TrueColor
[  1837.988] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  1837.988] (**) NVIDIA(0): Option "UseEDID" "false"
[  1837.988] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP"
[  1837.988] (**) NVIDIA(0): Enabling 2D acceleration
[  1837.988] (**) NVIDIA(0): ConnectedMonitor string: "DFP"
[  1837.988] (**) NVIDIA(0): Ignoring EDIDs
[  1838.833] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please
[  1838.833] (EE) NVIDIA(GPU-0):     check your system's kernel log for additional error
[  1838.833] (EE) NVIDIA(GPU-0):     messages and refer to Chapter 8: Common Problems in the
[  1838.833] (EE) NVIDIA(GPU-0):     README for additional information.
[  1838.833] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
[  1838.833] (EE) NVIDIA(0): Failing initialization of X screen
[  1838.833] (II) UnloadModule: "nvidia"
[  1838.833] (II) UnloadSubModule: "wfb"
[  1838.833] (II) UnloadSubModule: "fb"
[  1838.833] (EE) Screen(s) found, but none have a usable configuration.
[  1838.833] (EE) 
Fatal server error:
[  1838.833] (EE) no screens found(EE) 
[  1838.833] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[  1838.833] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[  1838.833] (EE) 
[  1838.833] (EE) Server terminated with error (1). Closing log file.

xorg.8.log:

	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   135.093] (EE) NVIDIA: Failed to load module "glxserver_nvidia" (module does not exist, 0)
[   135.093] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[   135.093] (EE) NVIDIA(0):     log file that the GLX module has been loaded in your X
[   135.093] (EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If
[   135.093] (EE) NVIDIA(0):     you continue to encounter problems, Please try
[   135.093] (EE) NVIDIA(0):     reinstalling the NVIDIA driver.

journalctl -b -p3:

-- Logs begin at Sat 2019-11-30 12:57:17 -03, end at Mon 2019-12-02 18:01:01 -03. --
Dec 02 17:53:50 devswap-pc kernel: NVRM: Xid (PCI:0000:01:00): 13, pid=262, Graphics SM Global Exception on (GPC 0, TPC 0): ECC SEC Error
Dec 02 17:53:50 devswap-pc kernel: NVRM: Xid (PCI:0000:01:00): 13, pid=262, Graphics SM Global Exception on (GPC 0, TPC 0): Timeout Error
Dec 02 17:53:50 devswap-pc kernel: NVRM: Xid (PCI:0000:01:00): 13, pid=262, Graphics Exception: ESR 0x504648=0xbadf1002 0x504650=0xbadf1002 0x504644=0xbadf1002 0x50464c=0xbadf1002
Dec 02 17:53:50 devswap-pc kernel: NVRM: Xid (PCI:0000:01:00): 13, pid=262, Graphics Exception: ChID 0000, Class 00000000, Offset 00000000, Data 00000000
Dec 02 17:53:51 devswap-pc kernel: [drm:nv_drm_load [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00000100] Failed to allocate NvKmsKapiDevice
Dec 02 17:53:51 devswap-pc kernel: [drm:nv_drm_probe_devices [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00000100] Failed to register device

mhwd -li:

Installed PCI configs:
--------------------------------------------------------------------------------
                  NAME               VERSION          FREEDRIVER           TYPE
--------------------------------------------------------------------------------
video-hybrid-intel-nvidia-430xx-bumblebee            2019.10.25               false            PCI


Warning:  No installed USB configs!

pacman -Qs intel|radeon|amd|nvidia:

local/intel-ucode 20191115-1
    Microcode update files for Intel CPUs
local/ipw2100-fw 1.3-9
    Intel Centrino Drivers firmware for IPW2100
local/ipw2200-fw 3.1-7
    Firmware for the Intel PRO/Wireless 2200BG
local/lib32-libva-intel-driver 2.3.0-1
    VA-API implementation for Intel G45 and HD Graphics family (32-bit)
local/lib32-mesa 19.2.6-0.1
    An open-source implementation of the OpenGL specification (32-bit)
local/lib32-nvidia-430xx-utils 430.64-1
    NVIDIA drivers utilities (32-bit)
local/libva-intel-driver 2.3.0-2
    VA-API implementation for Intel G45 and HD Graphics family
local/libvdpau 1.3-1
    Nvidia VDPAU library
local/linux53-nvidia-430xx 430.64-2 (linux53-extramodules)
    NVIDIA drivers for linux.
local/mesa 19.2.6-0.1
    An open-source implementation of the OpenGL specification
local/mhwd-amdgpu 1.2.1-1
    MHWD module-ids for amdgpu
local/mhwd-nvidia-340xx 340.107-1
    MHWD module-ids for nvidia 340.107
local/mhwd-nvidia-390xx 390.132-1
    MHWD module-ids for nvidia 390.132
local/mhwd-nvidia-418xx 418.113-1
    MHWD module-ids for nvidia-418xx 418.113
local/mhwd-nvidia-430xx 430.64-1
    MHWD module-ids for nvidia-430xx 430.64
local/mhwd-nvidia-435xx 435.21-1
    MHWD module-ids for nvidia 435.21
local/mhwd-nvidia-440xx 440.31-1
    MHWD module-ids for nvidia 440.31
local/nvidia-430xx-utils 430.64-1
    NVIDIA drivers utilities
local/xf86-video-intel 1:2.99.917+893+gbff5eca4-1 (xorg-drivers)
    X.org Intel i810/i830/i915/945G/G965+ video drivers

inxi -SMGxxaz:

System:    Host: devswap-pc Kernel: 5.3.12-1-MANJARO x86_64 bits: 64 compiler: gcc v: 9.2.0 
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.3-x86_64 root=UUID=582d6743-f4d1-45a9-b6d7-4179a6fcc368 rw 3 
           acpi_rev_override=1 sysrq_always_enabled=1 apparmor=1 security=apparmor 
           resume=UUID=5636b6d6-568d-4706-9545-ff27b52632e7 udev.log_priority=3 
           Console: tty 1 dm: N/A Distro: Manjaro Linux 
Machine:   Type: Laptop System: Acer product: Aspire E5-576G v: V1.32M serial: <filter> 
           Mobo: KBL model: Ironman_SK v: V1.32M serial: <filter> UEFI: Insyde v: 1.32M date: 11/28/2017 
Graphics:  Device-1: Intel vendor: Acer Incorporated ALI driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:5906 
           Device-2: NVIDIA GM108M [GeForce 940MX] vendor: Acer Incorporated ALI driver: nvidia v: 430.64 bus ID: 01:00.0 
           chip ID: 10de:134d 
           Display: server: X.org 1.20.5 driver: modesetting FAILED: nvidia tty: 170x48 
           Message: Advanced graphics data unavailable in console. Try -G --display 

I wanted to manage to make my graphics card work in Manjaro and now I breaked my entire system Kinda funny huh

[AgentS]

It doesn't look right (but it's long time I had troubleshooted bumblebee...).
But you said you installed optimus-switch.
Have you followed the installation guide? You were supposed to clear old nvidia xorg conf and install video-nvidiaxxx driver.
What is your actual status now?

If you are on optimus-switch, more info:

for Xconf in $(ls /etc/X11/xorg.conf.d/*.conf); do echo -e "\n" $Xconf ; cat $Xconf ; done
for Xconf in $(ls /etc/modules-load.d/*.conf); do echo -e "\n" $Xconf ; cat $Xconf ; done
for Xconf in $(ls /etc/modprobe.d/*.conf); do echo -e "\n" $Xconf ; cat $Xconf ; done
journalctl -b -p3 --no-pager --no-hostname
for Xlog in $(ls /var/log/Xorg.?.log); do echo -e "\n" $Xlog ; grep -E "(EE)|(WW)|failed|Time" $Xlog ; done
cat /proc/cmdline

If you are on bumblebee:

grep bumblebee /etc/group | grep -c $USER
grep -v ^# /etc/bumblebee/bumblebee.conf
grep -v ^# /etc/bumblebee/xorg.conf.nvidia
systemctl status bumblebeed   --no-pager
journalctl -b -g "bbswitch|bumble"  --no-pager --no-hostname

---

Please notice that your posted logs are from older time.

[devswapt]

Only the first "for" command gave an output:

 /etc/modprobe.d/99-nvidia.conf
#
#necessary blacklist and
#nvidia_drm modeset for nvidia/prime
#

blacklist nouveau
blacklist nvidiafb
blacklist rivafb
options nvidia_drm modeset=1

 /etc/modprobe.d/blacklist.conf
blacklist nouveau

 /etc/modprobe.d/mhwd-bbswitch.conf
##
## Generated by mhwd - Manjaro Hardware Detection
##
 
 
options bbswitch load_state=0 unload_state=0

 /etc/modprobe.d/mhwd-nvidia.conf
##
## Generated by mhwd - Manjaro Hardware Detection
##
 
 
blacklist nouveau
blacklist nvidia
blacklist nvidia-modeset
blacklist nvidia-uvm
blacklist ttm
blacklist drm_kms_helper
blacklist drm

journalctl:

-- Logs begin at Sat 2019-11-30 12:57:17 -03, end at Mon 2019-12-02 22:04:20 -03. --
Dec 02 21:47:38 kernel: NVRM: Xid (PCI:0000:01:00): 13, pid=262, Graphics SM Global Exception on (GPC 0, TPC 0): ECC SEC Error
Dec 02 21:47:38 kernel: NVRM: Xid (PCI:0000:01:00): 13, pid=262, Graphics SM Global Exception on (GPC 0, TPC 0): Timeout Error
Dec 02 21:47:38 kernel: NVRM: Xid (PCI:0000:01:00): 13, pid=262, Graphics Exception: ESR 0x504648=0xbadf1002 0x504650=0xbadf1002 0x504644=0xbadf1002 0x50464c=0xbadf1002
Dec 02 21:47:38 kernel: NVRM: Xid (PCI:0000:01:00): 13, pid=262, Graphics Exception: ChID 0000, Class 00000000, Offset 00000000, Data 00000000
Dec 02 21:47:38 kernel: [drm:nv_drm_load [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00000100] Failed to allocate NvKmsKapiDevice
Dec 02 21:47:38 kernel: [drm:nv_drm_probe_devices [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00000100] Failed to register device

for Xlog:

 /var/log/Xorg.0.log
[   135.071] Current Operating System: Linux devswap-pc 5.3.12-1-MANJARO #1 SMP PREEMPT Thu Nov 21 10:55:53 UTC 2019 x86_64
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   135.071] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec  2 16:17:08 2019
[   135.072] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[   135.072] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   135.072] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[   135.072] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[   135.078] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   135.081] (WW) Falling back to old probe method for modesetting
[   135.093] (WW) Warning, couldn't open module glxserver_nvidia
[   135.093] (EE) NVIDIA: Failed to load module "glxserver_nvidia" (module does not exist, 0)
[   135.093] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[   135.093] (EE) NVIDIA(0):     log file that the GLX module has been loaded in your X
[   135.093] (EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If
[   135.093] (EE) NVIDIA(0):     you continue to encounter problems, Please try
[   135.093] (EE) NVIDIA(0):     reinstalling the NVIDIA driver.

 /var/log/Xorg.8.log
[  1837.975] Current Operating System: Linux devswap-pc 5.3.12-1-MANJARO #1 SMP PREEMPT Thu Nov 21 10:55:53 UTC 2019 x86_64
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1837.975] (==) Log file: "/var/log/Xorg.8.log", Time: Sun Dec  1 16:41:51 2019
[  1837.976] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[  1837.976] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[  1837.976] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[  1837.976] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[  1837.978] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[  1837.981] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  1838.833] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please
[  1838.833] (EE) NVIDIA(GPU-0):     check your system's kernel log for additional error
[  1838.833] (EE) NVIDIA(GPU-0):     messages and refer to Chapter 8: Common Problems in the
[  1838.833] (EE) NVIDIA(GPU-0):     README for additional information.
[  1838.833] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
[  1838.833] (EE) NVIDIA(0): Failing initialization of X screen
[  1838.833] (EE) Screen(s) found, but none have a usable configuration.
[  1838.833] (EE) 
[  1838.833] (EE) no screens found(EE) 
[  1838.833] (EE) 
[  1838.833] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[  1838.833] (EE) 
[  1838.833] (EE) Server terminated with error (1). Closing log file.

cat /proc/cmdline

BOOT_IMAGE=/boot/vmlinuz-5.3-x86_64 root=UUID=582d6743-f4d1-45a9-b6d7-4179a6fcc368 rw 3 acpi_rev_override=1 sysrq_always_enabled=1 apparmor=1 security=apparmor resume=UUID=5636b6d6-568d-4706-9545-ff27b52632e7 udev.log_priority=3

[AgentS]

@AgentS

Have you followed the installation guide? You were supposed to clear old nvidia xorg conf and install video-nvidiaxxx driver

It seems you have mixed state. You have to cleanup and follow optimus-switch installation instructions.

[devswapt]

I recovered the graphical enviroment and the system booted with no problems, but I still being unable to open nvidia-settings: (ERROR: Unable to load info from any available system)

[AgentS]

@devswapt

I recovered the graphical enviroment and the system booted with no problems

How? What have you fixed/changed?

@devswapt

I still being unable to open nvidia-settings

@AgentS

It seems you have mixed state. You have to cleanup and follow optimus-switch installation instructions.

[devswapt]

Deleted these folders:

/etc/X11/
/etc/X11/mhwd.d/
/etc/X11/xorg.conf.d/
/etc/modprobe.d/
/etc/modules-load.d/

and reinstalled optimus-switch with the install script.

[AgentS]

@devswapt

I still being unable to open nvidia-settings:

I suppose you try this when having rebooted in Nvidia mode with optimus-switch.
If so, provide these when in this (nvidia) mode:

for Xconf in $(ls /etc/X11/xorg.conf.d/*.conf); do echo -e "\n" $Xconf ; cat $Xconf ; done
for Xconf in $(ls /etc/modules-load.d/*.conf); do echo -e "\n" $Xconf ; cat $Xconf ; done
for Xconf in $(ls /etc/modprobe.d/*.conf); do echo -e "\n" $Xconf ; cat $Xconf ; done
journalctl -b -p3 --no-pager --no-hostname
cat /var/log/Xorg.0.log

[devswapt]

@AgentS

for Xconf in $(ls /etc/modprobe.d/*.conf); do echo -e "\n" $Xconf ; cat $Xconf ; done

(no output)

 /etc/modules-load.d/99-nvidia.conf
##
##loads necessary modules for nvidia gpu
##
 
nvidia
nvidia-drm

 /etc/modules-load.d/modules.conf
# List of modules to load at boot

 /etc/modprobe.d/99-nvidia.conf
#
#necessary blacklist and
#nvidia_drm modeset for nvidia/prime
#

blacklist nouveau
blacklist nvidiafb
blacklist rivafb
options nvidia_drm modeset=1

 /etc/modprobe.d/blacklist.conf
blacklist nouveau

 /etc/modprobe.d/mhwd-bbswitch.conf
##
## Generated by mhwd - Manjaro Hardware Detection
##
 
 
options bbswitch load_state=0 unload_state=0

 /etc/modprobe.d/mhwd-nvidia.conf
##
## Generated by mhwd - Manjaro Hardware Detection
##
 
 
blacklist nouveau
blacklist nvidia
blacklist nvidia-modeset
blacklist nvidia-uvm
blacklist ttm
blacklist drm_kms_helper
blacklist drm

journalctl:

-- Logs begin at Sat 2019-11-30 12:57:17 -03, end at Tue 2019-12-03 16:26:49 -03. --
dic 03 15:16:15 kernel: NVRM: Xid (PCI:0000:01:00): 13, pid=257, Graphics SM Global Exception on (GPC 0, TPC 0): ECC SEC Error
dic 03 15:16:15 kernel: NVRM: Xid (PCI:0000:01:00): 13, pid=257, Graphics SM Global Exception on (GPC 0, TPC 0): Timeout Error
dic 03 15:16:15 kernel: NVRM: Xid (PCI:0000:01:00): 13, pid=257, Graphics Exception: ESR 0x504648=0xbadf1002 0x504650=0xbadf1002 0x504644=0xbadf1002 0x50464c=0xbadf1002
dic 03 15:16:15 kernel: NVRM: Xid (PCI:0000:01:00): 13, pid=257, Graphics Exception: ChID 0000, Class 00000000, Offset 00000000, Data 00000000
dic 03 15:16:15 kernel: [drm:nv_drm_load [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00000100] Failed to allocate NvKmsKapiDevice
dic 03 15:16:15 kernel: [drm:nv_drm_probe_devices [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00000100] Failed to register device
dic 03 15:16:29 kernel: NVRM: Xid (PCI:0000:01:00): 13, pid=657, Graphics SM Global Exception on (GPC 0, TPC 0): ECC SEC Error
dic 03 15:16:29 kernel: NVRM: Xid (PCI:0000:01:00): 13, pid=657, Graphics SM Global Exception on (GPC 0, TPC 0): Timeout Error
dic 03 15:16:29 kernel: NVRM: Xid (PCI:0000:01:00): 13, pid=657, Graphics Exception: ESR 0x504648=0xbadf1002 0x504650=0xbadf1002 0x504644=0xbadf1002 0x50464c=0xbadf1002
dic 03 15:16:29 kernel: NVRM: Xid (PCI:0000:01:00): 13, pid=657, Graphics Exception: ChID 0000, Class 00000000, Offset 00000000, Data 00000000
dic 03 15:20:20 kernel: usb 1-4: device descriptor read/64, error -71
dic 03 15:21:29 kernel: usb 1-4: device not accepting address 9, error -71
dic 03 15:23:49 kernel: usb 1-4: device not accepting address 18, error -71

Xorg.0.log:

[    31.097] (--) Log file renamed from "/var/log/Xorg.pid-657.log" to "/var/log/Xorg.0.log"
[    31.235] 
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[    31.235] Build Operating System: Linux Arch Linux
[    31.235] Current Operating System: Linux devswap-pc 5.3.12-1-MANJARO #1 SMP PREEMPT Thu Nov 21 10:55:53 UTC 2019 x86_64
[    31.236] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3-x86_64 root=UUID=582d6743-f4d1-45a9-b6d7-4179a6fcc368 rw acpi_rev_override=1 sysrq_always_enabled=1 apparmor=1 security=apparmor resume=UUID=5636b6d6-568d-4706-9545-ff27b52632e7 udev.log_priority=3
[    31.236] Build Date: 27 October 2019  08:49:23AM
[    31.236]  
[    31.236] Current version of pixman: 0.38.4
[    31.236]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    31.236] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    31.236] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec  3 15:16:27 2019
[    31.286] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    31.351] (==) No Layout section.  Using the first Screen section.
[    31.351] (==) No screen section available. Using defaults.
[    31.351] (**) |-->Screen "Default Screen Section" (0)
[    31.351] (**) |   |-->Monitor "<default monitor>"
[    31.397] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    31.397] (==) Automatically adding devices
[    31.397] (==) Automatically enabling devices
[    31.397] (==) Automatically adding GPU devices
[    31.397] (==) Automatically binding GPU devices
[    31.397] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    31.495] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    31.495]    Entry deleted from font path.
[    31.495] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    31.495]    Entry deleted from font path.
[    31.605] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[    31.605]    Entry deleted from font path.
[    31.605]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[    31.607] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[    31.607]    Entry deleted from font path.
[    31.607]    (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[    31.607] (==) FontPath set to:
        /usr/share/fonts/misc,
        /usr/share/fonts/TTF
[    31.607] (==) ModulePath set to "/usr/lib/xorg/modules"
[    31.607] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    31.607] (II) Module ABI versions:
[    31.607]    X.Org ANSI C Emulation: 0.4
[    31.607]    X.Org Video Driver: 24.0
[    31.607]    X.Org XInput driver : 24.1
[    31.607]    X.Org Server Extension : 10.0
[    31.609] (++) using VT number 1

[    31.609] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    31.610] (II) xfree86: Adding drm device (/dev/dri/card1)
[    31.658] (--) PCI:*(0@0:2:0) 8086:5906:1025:121a rev 2, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[    31.658] (--) PCI: (1@0:0:0) 10de:134d:1025:121a rev 162, Mem @ 0xb3000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128
[    31.658] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    31.658] (II) LoadModule: "glx"
[    31.677] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    31.888] (II) Module glx: vendor="X.Org Foundation"
[    31.888]    compiled for 1.20.5, module version = 1.0.0
[    31.889]    ABI class: X.Org Server Extension, version 10.0
[    31.889] (II) Applying OutputClass "intel" to /dev/dri/card1
[    31.889]    loading driver: modesetting
[    31.889] (==) Matched modesetting as autoconfigured driver 0
[    31.889] (==) Matched intel as autoconfigured driver 1
[    31.889] (==) Matched fbdev as autoconfigured driver 2
[    31.889] (==) Matched vesa as autoconfigured driver 3
[    31.889] (==) Assigned the driver to the xf86ConfigLayout
[    31.889] (II) LoadModule: "modesetting"
[    31.889] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    31.915] (II) Module modesetting: vendor="X.Org Foundation"
[    31.915]    compiled for 1.20.5, module version = 1.20.5
[    31.915]    Module class: X.Org Video Driver
[    31.915]    ABI class: X.Org Video Driver, version 24.0
[    31.915] (II) LoadModule: "intel"
[    31.916] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    31.987] (II) Module intel: vendor="X.Org Foundation"
[    31.987]    compiled for 1.20.5, module version = 2.99.917
[    31.987]    Module class: X.Org Video Driver
[    31.987]    ABI class: X.Org Video Driver, version 24.0
[    31.987] (II) LoadModule: "fbdev"
[    31.987] (WW) Warning, couldn't open module fbdev
[    31.987] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    31.987] (II) LoadModule: "vesa"
[    31.988] (WW) Warning, couldn't open module vesa
[    31.988] (EE) Failed to load module "vesa" (module does not exist, 0)
[    31.988] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    31.988] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
        i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
        915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
        Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
        GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    31.988] (II) intel: Driver for Intel(R) HD Graphics
[    31.988] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    31.988] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    32.003] (II) modeset(0): using drv /dev/dri/card1
[    32.004] (II) modeset(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    32.004] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    32.004] (==) modeset(0): RGB weight 888
[    32.004] (==) modeset(0): Default visual is TrueColor
[    32.004] (II) Loading sub module "glamoregl"
[    32.004] (II) LoadModule: "glamoregl"
[    32.004] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    32.076] (II) Module glamoregl: vendor="X.Org Foundation"
[    32.076]    compiled for 1.20.5, module version = 1.0.1
[    32.076]    ABI class: X.Org ANSI C Emulation, version 0.4
[    36.158] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) HD Graphics 610 (Kaby Lake GT1) 
[    36.159] (II) modeset(0): glamor initialized
[    36.160] (II) modeset(0): Output eDP-1 has no monitor section
[    36.163] (II) modeset(0): Output HDMI-1 has no monitor section
[    36.164] (II) modeset(0): Output DP-1 has no monitor section
[    36.189] (II) modeset(0): EDID for output eDP-1
[    36.189] (II) modeset(0): Manufacturer: BOE  Model: 675  Serial#: 0
[    36.189] (II) modeset(0): Year: 2015  Week: 1
[    36.189] (II) modeset(0): EDID Version: 1.4
[    36.189] (II) modeset(0): Digital Display Input
[    36.189] (II) modeset(0): 6 bits per channel
[    36.189] (II) modeset(0): Digital interface is DisplayPort
[    36.189] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    36.189] (II) modeset(0): Gamma: 2.20
[    36.189] (II) modeset(0): No DPMS capabilities specified
[    36.189] (II) modeset(0): Supported color encodings: RGB 4:4:4 
[    36.189] (II) modeset(0): First detailed timing is preferred mode
[    36.189] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[    36.189] (II) modeset(0): redX: 0.590 redY: 0.350   greenX: 0.329 greenY: 0.555
[    36.189] (II) modeset(0): blueX: 0.152 blueY: 0.118   whiteX: 0.312 whiteY: 0.328
[    36.189] (II) modeset(0): Manufacturer's mask: 0
[    36.189] (II) modeset(0): Supported detailed timing:
[    36.189] (II) modeset(0): clock: 72.3 MHz   Image Size:  344 x 194 mm
[    36.189] (II) modeset(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    36.189] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 790 v_border: 0
[    36.189] (II) modeset(0):  BOE CQ
[    36.189] (II) modeset(0):  NT156WHM-N42
[    36.189] (II) modeset(0): EDID (in hex):
[    36.189] (II) modeset(0):   00ffffffffffff0009e5750600000000
[    36.189] (II) modeset(0):   01190104952213780224109759548e27
[    36.189] (II) modeset(0):   1e505400000001010101010101010101
[    36.189] (II) modeset(0):   0101010101013e1c56a0500016303020
[    36.189] (II) modeset(0):   360058c21000001a0000000000000000
[    36.189] (II) modeset(0):   00000000000000000000000000fe0042
[    36.189] (II) modeset(0):   4f452043510a202020202020000000fe
[    36.189] (II) modeset(0):   004e5431353657484d2d4e34320a0026
[    36.189] (II) modeset(0): Printing probed modes for output eDP-1
[    36.189] (II) modeset(0): Modeline "1366x768"x60.0   72.30  1366 1414 1446 1526  768 771 777 790 +hsync -vsync (47.4 kHz eP)
[    36.189] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[    36.189] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    36.189] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    36.189] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    36.189] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    36.189] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    36.189] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    36.190] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    36.190] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    36.190] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    36.190] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    36.190] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    36.190] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    36.190] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    36.190] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    36.190] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    36.190] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    36.190] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    36.190] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    36.190] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    36.190] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    36.190] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    36.190] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    36.190] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    36.190] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    36.190] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    36.190] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    36.190] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    36.190] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    36.190] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    36.190] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    36.190] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    36.190] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    36.190] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    36.190] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    36.190] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    36.190] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    36.190] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    36.190] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    36.190] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    36.190] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    36.190] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    36.190] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    36.190] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    36.190] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    36.190] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    36.190] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    36.190] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    36.190] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    36.190] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    36.190] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    36.190] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    36.190] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    36.190] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    36.190] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    36.190] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    36.190] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    36.190] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    36.194] (II) modeset(0): EDID for output HDMI-1
[    36.194] (II) modeset(0): EDID for output DP-1
[    36.194] (II) modeset(0): Output eDP-1 connected
[    36.194] (II) modeset(0): Output HDMI-1 disconnected
[    36.194] (II) modeset(0): Output DP-1 disconnected
[    36.194] (II) modeset(0): Using exact sizes for initial modes
[    36.194] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[    36.194] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    36.194] (==) modeset(0): DPI set to (96, 96)
[    36.194] (II) Loading sub module "fb"
[    36.194] (II) LoadModule: "fb"
[    36.194] (II) Loading /usr/lib/xorg/modules/libfb.so
[    36.234] (II) Module fb: vendor="X.Org Foundation"
[    36.234]    compiled for 1.20.5, module version = 1.0.0
[    36.234]    ABI class: X.Org ANSI C Emulation, version 0.4
[    36.234] (II) UnloadModule: "intel"
[    36.234] (II) Unloading intel
[    36.432] (==) modeset(0): Backing store enabled
[    36.432] (==) modeset(0): Silken mouse disabled
[    36.488] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    36.488] (==) modeset(0): DPMS enabled
[    36.489] (II) modeset(0): [DRI2] Setup complete
[    36.489] (II) modeset(0): [DRI2]   DRI driver: i965
[    36.489] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    36.489] (II) Initializing extension Generic Event Extension
[    36.489] (II) Initializing extension SHAPE
[    36.489] (II) Initializing extension MIT-SHM
[    36.490] (II) Initializing extension XInputExtension
[    36.490] (II) Initializing extension XTEST
[    36.490] (II) Initializing extension BIG-REQUESTS
[    36.490] (II) Initializing extension SYNC
[    36.490] (II) Initializing extension XKEYBOARD
[    36.491] (II) Initializing extension XC-MISC
[    36.491] (II) Initializing extension SECURITY
[    36.491] (II) Initializing extension XFIXES
[    36.491] (II) Initializing extension RENDER
[    36.491] (II) Initializing extension RANDR
[    36.492] (II) Initializing extension COMPOSITE
[    36.492] (II) Initializing extension DAMAGE
[    36.492] (II) Initializing extension MIT-SCREEN-SAVER
[    36.492] (II) Initializing extension DOUBLE-BUFFER
[    36.492] (II) Initializing extension RECORD
[    36.493] (II) Initializing extension DPMS
[    36.493] (II) Initializing extension Present
[    36.493] (II) Initializing extension DRI3
[    36.493] (II) Initializing extension X-Resource
[    36.493] (II) Initializing extension XVideo
[    36.494] (II) Initializing extension XVideo-MotionCompensation
[    36.494] (II) Initializing extension GLX
[    36.501] (II) AIGLX: Loaded and initialized i965
[    36.501] (II) GLX: Initialized DRI2 GL provider for screen 0
[    36.501] (II) Initializing extension XFree86-VidModeExtension
[    36.501] (II) Initializing extension XFree86-DGA
[    36.501] (II) Initializing extension XFree86-DRI
[    36.501] (II) Initializing extension DRI2
[    36.656] (II) modeset(0): Damage tracking initialized
[    36.656] (II) modeset(0): Setting screen physical size to 361 x 203
[    37.258] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    37.258] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    37.258] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    37.258] (II) LoadModule: "libinput"
[    37.258] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    37.302] (II) Module libinput: vendor="X.Org Foundation"
[    37.302]    compiled for 1.20.5, module version = 0.29.0
[    37.302]    Module class: X.Org XInput Driver
[    37.302]    ABI class: X.Org XInput driver, version 24.1
[    37.302] (II) Using input driver 'libinput' for 'Power Button'
[    37.302] (**) Power Button: always reports core events
[    37.302] (**) Option "Device" "/dev/input/event3"
[    37.302] (**) Option "_source" "server/udev"
[    37.391] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    37.391] (II) event3  - Power Button: device is a keyboard
[    37.391] (II) event3  - Power Button: device removed
[    37.423] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    37.423] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    37.425] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    37.425] (II) event3  - Power Button: device is a keyboard
[    37.426] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    37.426] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    37.426] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    37.426] (II) Using input driver 'libinput' for 'Video Bus'
[    37.426] (**) Video Bus: always reports core events
[    37.426] (**) Option "Device" "/dev/input/event6"
[    37.426] (**) Option "_source" "server/udev"
[    37.427] (II) event6  - Video Bus: is tagged by udev as: Keyboard
[    37.427] (II) event6  - Video Bus: device is a keyboard
[    37.427] (II) event6  - Video Bus: device removed
[    37.476] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event6"
[    37.476] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    37.478] (II) event6  - Video Bus: is tagged by udev as: Keyboard
[    37.478] (II) event6  - Video Bus: device is a keyboard
[    37.479] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    37.479] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    37.479] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    37.479] (II) Using input driver 'libinput' for 'Video Bus'
[    37.479] (**) Video Bus: always reports core events
[    37.479] (**) Option "Device" "/dev/input/event7"
[    37.479] (**) Option "_source" "server/udev"
[    37.481] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[    37.481] (II) event7  - Video Bus: device is a keyboard
[    37.481] (II) event7  - Video Bus: device removed
[    37.530] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:32/LNXVIDEO:01/input/input7/event7"
[    37.530] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    37.532] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[    37.532] (II) event7  - Video Bus: device is a keyboard
[    37.533] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    37.533] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    37.533] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    37.533] (II) Using input driver 'libinput' for 'Power Button'
[    37.533] (**) Power Button: always reports core events
[    37.533] (**) Option "Device" "/dev/input/event0"
[    37.533] (**) Option "_source" "server/udev"
[    37.534] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    37.534] (II) event0  - Power Button: device is a keyboard
[    37.534] (II) event0  - Power Button: device removed
[    37.563] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    37.563] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    37.565] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    37.565] (II) event0  - Power Button: device is a keyboard
[    37.566] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    37.566] (II) No input driver specified, ignoring this device.
[    37.566] (II) This device may have been added with another device file.
[    37.566] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    37.566] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    37.566] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    37.566] (II) Using input driver 'libinput' for 'Sleep Button'
[    37.566] (**) Sleep Button: always reports core events
[    37.566] (**) Option "Device" "/dev/input/event1"
[    37.566] (**) Option "_source" "server/udev"
[    37.568] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    37.568] (II) event1  - Sleep Button: device is a keyboard
[    37.568] (II) event1  - Sleep Button: device removed
[    37.596] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    37.596] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    37.598] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    37.598] (II) event1  - Sleep Button: device is a keyboard
[    37.600] (II) config/udev: Adding input device HD WebCam: HD WebCam (/dev/input/event17)
[    37.600] (**) HD WebCam: HD WebCam: Applying InputClass "evdev keyboard catchall"
[    37.600] (**) HD WebCam: HD WebCam: Applying InputClass "libinput keyboard catchall"
[    37.600] (II) Using input driver 'libinput' for 'HD WebCam: HD WebCam'
[    37.600] (**) HD WebCam: HD WebCam: always reports core events
[    37.600] (**) Option "Device" "/dev/input/event17"
[    37.600] (**) Option "_source" "server/udev"
[    37.602] (II) event17 - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[    37.602] (II) event17 - HD WebCam: HD WebCam: device is a keyboard
[    37.602] (II) event17 - HD WebCam: HD WebCam: device removed
[    37.650] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input22/event17"
[    37.650] (II) XINPUT: Adding extended input device "HD WebCam: HD WebCam" (type: KEYBOARD, id 11)
[    37.652] (II) event17 - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[    37.652] (II) event17 - HD WebCam: HD WebCam: device is a keyboard
[    37.653] (II) config/udev: Adding input device SYNA7DB5:00 06CB:7DB7 Touchpad (/dev/input/event9)
[    37.653] (**) SYNA7DB5:00 06CB:7DB7 Touchpad: Applying InputClass "evdev touchpad catchall"
[    37.653] (**) SYNA7DB5:00 06CB:7DB7 Touchpad: Applying InputClass "libinput touchpad catchall"
[    37.653] (II) Using input driver 'libinput' for 'SYNA7DB5:00 06CB:7DB7 Touchpad'
[    37.653] (**) SYNA7DB5:00 06CB:7DB7 Touchpad: always reports core events
[    37.653] (**) Option "Device" "/dev/input/event9"
[    37.653] (**) Option "_source" "server/udev"
[    37.656] (II) event9  - SYNA7DB5:00 06CB:7DB7 Touchpad: is tagged by udev as: Touchpad
[    37.659] (II) event9  - SYNA7DB5:00 06CB:7DB7 Touchpad: device is a touchpad
[    37.659] (II) event9  - SYNA7DB5:00 06CB:7DB7 Touchpad: device removed
[    37.703] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-SYNA7DB5:00/0018:06CB:7DB7.0001/input/input13/event9"
[    37.704] (II) XINPUT: Adding extended input device "SYNA7DB5:00 06CB:7DB7 Touchpad" (type: TOUCHPAD, id 12)
[    37.706] (**) Option "AccelerationScheme" "none"
[    37.706] (**) SYNA7DB5:00 06CB:7DB7 Touchpad: (accel) selected scheme none/0
[    37.706] (**) SYNA7DB5:00 06CB:7DB7 Touchpad: (accel) acceleration factor: 2.000
[    37.706] (**) SYNA7DB5:00 06CB:7DB7 Touchpad: (accel) acceleration threshold: 4
[    37.709] (II) event9  - SYNA7DB5:00 06CB:7DB7 Touchpad: is tagged by udev as: Touchpad
[    37.711] (II) event9  - SYNA7DB5:00 06CB:7DB7 Touchpad: device is a touchpad
[    37.713] (II) config/udev: Adding input device SYNA7DB5:00 06CB:7DB7 Touchpad (/dev/input/mouse0)
[    37.713] (II) No input driver specified, ignoring this device.
[    37.713] (II) This device may have been added with another device file.
[    37.713] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[    37.713] (II) No input driver specified, ignoring this device.
[    37.713] (II) This device may have been added with another device file.
[    37.714] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[    37.714] (II) No input driver specified, ignoring this device.
[    37.714] (II) This device may have been added with another device file.
[    37.714] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[    37.714] (II) No input driver specified, ignoring this device.
[    37.714] (II) This device may have been added with another device file.
[    37.715] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[    37.715] (II) No input driver specified, ignoring this device.
[    37.715] (II) This device may have been added with another device file.
[    37.715] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[    37.715] (II) No input driver specified, ignoring this device.
[    37.715] (II) This device may have been added with another device file.
[    37.716] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event15)
[    37.716] (II) No input driver specified, ignoring this device.
[    37.716] (II) This device may have been added with another device file.
[    37.716] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event16)
[    37.716] (II) No input driver specified, ignoring this device.
[    37.716] (II) This device may have been added with another device file.
[    37.717] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    37.717] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    37.717] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    37.717] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    37.717] (**) AT Translated Set 2 keyboard: always reports core events
[    37.717] (**) Option "Device" "/dev/input/event4"
[    37.717] (**) Option "_source" "server/udev"
[    37.719] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    37.719] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[    37.721] (II) event4  - AT Translated Set 2 keyboard: device removed
[    37.746] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    37.747] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    37.749] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    37.749] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[    37.751] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    37.751] (II) No input driver specified, ignoring this device.
[    37.751] (II) This device may have been added with another device file.
[    37.752] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event8)
[    37.752] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    37.752] (**) Acer WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    37.752] (II) Using input driver 'libinput' for 'Acer WMI hotkeys'
[    37.752] (**) Acer WMI hotkeys: always reports core events
[    37.752] (**) Option "Device" "/dev/input/event8"
[    37.752] (**) Option "_source" "server/udev"
[    37.752] (II) event8  - Acer WMI hotkeys: is tagged by udev as: Keyboard
[    37.753] (II) event8  - Acer WMI hotkeys: device is a keyboard
[    37.753] (II) event8  - Acer WMI hotkeys: device removed
[    37.783] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
[    37.783] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 14)
[    37.784] (II) event8  - Acer WMI hotkeys: is tagged by udev as: Keyboard
[    37.785] (II) event8  - Acer WMI hotkeys: device is a keyboard
[    37.874] (EE) Failed to open authorization file "/var/run/sddm/{2e5eb831-3a78-4d23-a873-67987d6dc995}": No such file or directory
[   268.381] (EE) event9  - SYNA7DB5:00 06CB:7DB7 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.14.3/touchpad-jumping-cursors.html for details
[   337.507] (II) modeset(0): EDID vendor "BOE", prod id 1653
[   337.507] (II) modeset(0): Printing DDC gathered Modelines:
[   337.507] (II) modeset(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 777 790 +hsync -vsync (47.4 kHz eP)
[   347.235] (II) modeset(0): EDID vendor "BOE", prod id 1653
[   347.235] (II) modeset(0): Printing DDC gathered Modelines:
[   347.235] (II) modeset(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 777 790 +hsync -vsync (47.4 kHz eP)
[  2263.212] (EE) event9  - SYNA7DB5:00 06CB:7DB7 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.14.3/touchpad-jumping-cursors.html for details
[  3106.720] (EE) event9  - SYNA7DB5:00 06CB:7DB7 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.14.3/touchpad-jumping-cursors.html for details
[  3110.263] (EE) event9  - SYNA7DB5:00 06CB:7DB7 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.14.3/touchpad-jumping-cursors.html for details

[dglt]

@devswapt

Deleted these folders:

the directions tell you to remove any video related .conf files that are within those directories. not delete the directories entirely

@devswapt

BOOT_IMAGE=/boot/vmlinuz-5.3-x86_64 root=UUID=582d6743-f4d1-45a9-b6d7-4179a6fcc368 rw 3 acpi_rev_override=1 sysrq_always_enabled=1 apparmor=1 security=apparmor resume=UUID=5636b6d6-568d-4706-9545-ff27b52632e7 udev.log_priority=3

any particular reason you chose to use acpi_rev_override=1 ? it's not uncommon but it's usually used on dell machines though im not certain if thats by intention or coincidence but just search "acpi_rev_override=" and you'll see most if not all are dell related.
this thread should help explain which to use for your laptop, likely something like

acpi_osi=! acpi_osi='Windows 2015'
or
acpi_osi=! acpi_osi=Linux

EDIT: forgot the thread link

How to Choose the Proper ACPI Kernel Argument

The introduction of Optimus laptops have created new challenges for Linux users. One of the biggest issues is having the proprietary graphics card work when the system boots. Many times the advice given is to add an Advanced Configuration and Power Interface (acpi ) kernel parameter to grub. While a specific acpi kernel parameter may be given, it is sometimes not appropriate to the hardware it is being applied to. This can cause system instability and some functions of the laptop to not work pro…

@devswapt

/etc/modprobe.d/mhwd-bbswitch.conf

this file should be gone, the fact that it's there tells me you never uninstalled bumblebee like you were suppose to according to the instructions.

mhwd -li

the only video drivers you should have installed are video-nvidia-430xx

@devswapt

/etc/modprobe.d/mhwd-nvidia.conf

again, should of been deleted

post the current output of mhwd -li

[AgentS]

@dglt

the directions tell you to remove any video related .conf files that are within those directories

It seems there is no Xorg conf file.
Also

@devswapt

/etc/modprobe.d/mhwd-nvidia.conf

conflicts I guess. The file name is not the same as in your install.sh script (known file-names removed). Change in mhwd?

[devswapt]

> Installed PCI configs:
--------------------------------------------------------------------------------
                  NAME               VERSION          FREEDRIVER           TYPE
--------------------------------------------------------------------------------
video-hybrid-intel-nvidia-430xx-bumblebee            2019.10.25               false            PCI

@dglt

any particular reason you chose to use acpi_rev_override=1 ? it's not uncommon but it's usually used on dell machines though im not certain if thats by intention or coincidence but just search "acpi_rev_override=" and you'll see most if not all are dell related.
this thread should help explain which to use for your laptop, likely something like

Seems that acpi_rev_override=1 was already there, didn't know about that.