Discord closes after some time while on call

Hi there,

Sorry if this is not an appropriate place, but I could not seem to find a similar issue on discord help pages so it could be manjaro issue?

Discord closes itself approximately every half an hour-ish when I am in call. When I am not in call it never closes. I do not know why this occurs. I tried different headsets (via bluetooth, audio jack, and USB) but this did not work. I tried turning off all the optimisations thinking this could be affecting this closing but does not work either. Is anyone else having issues with this?

Thanks,
Scott

System:
  Kernel: 5.7.0-3-MANJARO x86_64 bits: 64 compiler: gcc v: 10.1.0 
  Desktop: Xfce 4.14.2 tk: Gtk 3.24.20 info: xfce4-panel, cairo-dock 
  wm: xfwm4 dm: LightDM 1.30.0 Distro: Manjaro Linux 
Machine:
  Type: Laptop System: Dell product: XPS 13 9370 v: N/A serial: <filter> 
  Chassis: type: 10 serial: <filter> 
  Mobo: Dell model: 0F6P3V v: A00 serial: <filter> UEFI: Dell v: 1.12.1 
  date: 12/11/2019 
Battery:
  ID-1: BAT0 charge: 44.9 Wh condition: 44.9/52.0 Wh (86%) volts: 8.7/7.6 
  model: SMP DELL G8VCF6C type: Li-poly serial: <filter> status: Full 
Memory:
  RAM: total: 15.36 GiB used: 2.36 GiB (15.3%) 
  RAM Report: 
  permissions: Unable to run dmidecode. Root privileges required. 
CPU:
  Topology: Quad Core model: Intel Core i7-8550U bits: 64 type: MT MCP 
  arch: Kaby Lake rev: A L2 cache: 8192 KiB bogomips: 32012 
  Speed: 1500 MHz min/max: 400/4000 MHz Core speeds (MHz): 1: 1500 2: 1500 
  3: 1500 4: 1500 5: 1500 6: 1500 7: 1500 8: 1500 
  Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon 
  art avx avx2 bmi1 bmi2 bts clflush clflushopt cmov constant_tsc cpuid 
  cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est 
  f16c flexpriority flush_l1d fma fpu fsgsbase fxsr ht hwp hwp_act_window 
  hwp_epp hwp_notify ibpb ibrs ida intel_pt invpcid invpcid_single lahf_lm 
  lm mca mce md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae 
  pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti 
  pts rdrand rdseed rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2 
  sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust 
  tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt 
  xsaves xtopology xtpr 
Graphics:
  Device-1: Intel UHD Graphics 620 vendor: Dell driver: i915 v: kernel 
  bus ID: 00:02.0 chip ID: 8086:5917 
  Display: x11 server: X.Org 1.20.8 driver: intel unloaded: modesetting 
  alternate: fbdev,vesa resolution: 1920x1080~60Hz 
  OpenGL: renderer: Mesa Intel UHD Graphics 620 (KBL GT2) v: 4.6 Mesa 20.0.7 
  direct render: Yes 
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio vendor: Dell 
  driver: snd_hda_intel v: kernel bus ID: 00:1f.3 chip ID: 8086:9d71 
  Sound Server: ALSA v: k5.7.0-3-MANJARO 
Network:
  Device-1: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter 
  vendor: Bigfoot Networks Killer 1435 Wireless-AC driver: ath10k_pci 
  v: kernel port: f040 bus ID: 02:00.0 chip ID: 168c:003e 
  IF: wlp2s0 state: up mac: <filter> 
  IP v4: <filter> type: dynamic noprefixroute scope: global 
  broadcast: <filter> 
  IP v6: <filter> type: noprefixroute scope: link 
  WAN IP: <filter> 
Drives:
  Local Storage: total: 491.78 GiB used: 167.91 GiB (34.1%) 
  ID-1: /dev/mmcblk0 model: SS16G size: 14.84 GiB serial: <filter> 
  scheme: MBR 
  ID-2: /dev/nvme0n1 vendor: Toshiba model: KXG50ZNV512G NVMe 512GB 
  size: 476.94 GiB speed: 31.6 Gb/s lanes: 4 serial: <filter> rev: AADA4106 
  scheme: GPT 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / size: 451.53 GiB used: 167.90 GiB (37.2%) fs: ext4 
  dev: /dev/nvme0n1p2 label: N/A uuid: a80024c3-690e-403b-b952-0e6abdd515e0 
  ID-2: /boot/efi size: 299.4 MiB used: 280 KiB (0.1%) fs: vfat 
  dev: /dev/nvme0n1p1 label: N/A uuid: 6E27-B79F 
  ID-3: /var/lib/snapd/snap/bitwarden/24 raw size: 54.6 MiB 
  size: <root required> used: <root required> fs: squashfs dev: /dev/loop7 
  label: N/A uuid: N/A 
  ID-4: /var/lib/snapd/snap/bitwarden/25 raw size: 54.6 MiB 
  size: <root required> used: <root required> fs: squashfs dev: /dev/loop3 
  label: N/A uuid: N/A 
  ID-5: /var/lib/snapd/snap/core18/1754 raw size: 54.9 MiB 
  size: <root required> used: <root required> fs: squashfs dev: /dev/loop0 
  label: N/A uuid: N/A 
  ID-6: /var/lib/snapd/snap/gnome-3-28-1804/116 raw size: 160.2 MiB 
  size: <root required> used: <root required> fs: squashfs dev: /dev/loop2 
  label: N/A uuid: N/A 
  ID-7: /var/lib/snapd/snap/gnome-3-28-1804/128 raw size: 161.4 MiB 
  size: <root required> used: <root required> fs: squashfs dev: /dev/loop1 
  label: N/A uuid: N/A 
  ID-8: /var/lib/snapd/snap/gtk-common-themes/1506 raw size: 62.1 MiB 
  size: <root required> used: <root required> fs: squashfs dev: /dev/loop6 
  label: N/A uuid: N/A 
  ID-9: /var/lib/snapd/snap/snap-store/415 raw size: 43.2 MiB 
  size: <root required> used: <root required> fs: squashfs dev: /dev/loop4 
  label: N/A uuid: N/A 
  ID-10: /var/lib/snapd/snap/snapd/7264 raw size: 27.1 MiB 
  size: <root required> used: <root required> fs: squashfs dev: /dev/loop5 
  label: N/A uuid: N/A 
  ID-11: /var/lib/snapd/snap/snapd/7777 raw size: 30.3 MiB 
  size: <root required> used: <root required> fs: squashfs dev: /dev/loop8 
  label: N/A uuid: N/A 
  ID-12: swap-1 size: 16.90 GiB used: 0 KiB (0.0%) fs: swap 
  dev: /dev/nvme0n1p3 label: N/A uuid: ea6943ed-ea1e-4d9d-a217-d8a02b7688aa 
Unmounted:
  ID-1: /dev/mmcblk0p1 size: 14.83 GiB fs: vfat label: N/A uuid: 6438-3130 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 12 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Device-1: 1-5:3 info: Realtek Integrated_Webcam_HD type: Video 
  driver: uvcvideo interfaces: 4 rev: 2.1 speed: 480 Mb/s chip ID: 0bda:58f4 
  serial: <filter> 
  Device-2: 1-7:4 info: Foxconn / Hon Hai type: Bluetooth driver: btusb 
  interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 0489:e0a2 
  Device-3: 1-10:5 info: Shenzhen Goodix Fingerprint Reader 
  type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 
  speed: 12 Mb/s chip ID: 27c6:5385 serial: <filter> 
  Hub: 2-0:1 info: Full speed (or root) Hub ports: 6 rev: 3.0 speed: 5 Gb/s 
  chip ID: 1d6b:0003 
Sensors:
  System Temperatures: cpu: 52.5 C mobo: N/A 
  Fan Speeds (RPM): N/A 
Info:
  Processes: 268 Uptime: 45m Init: systemd v: 245 Compilers: gcc: 10.1.0 
  Shell: bash v: 5.0.17 running in: xfce4-terminal inxi: 3.0.37 

The best thing you could do probably, to try to get the info you would need to fix this, would be to start discord via console and have a look at the output when it crashes.

Discord 0.0.10
Starting app.
Starting updater.
[Modules] Modules initializing
[Modules] Distribution: remote
[Modules] Host updates: enabled
[Modules] Module updates: enabled
[Modules] Module install path: /home/scott/.config/discord/0.0.10/modules
[Modules] Module installed file path: /home/scott/.config/discord/0.0.10/modules/installed.json
[Modules] Module download path: /home/scott/.config/discord/0.0.10/modules/pending
[15047:0621/195731.447242:ERROR:buffer_manager.cc(488)] [.DisplayCompositor]GL ERROR :GL_INVALID_OPERATION : glBufferData: <- error from previous GL command
[Modules] No updates to install
[Modules] Checking for host updates.
[Modules] Host is up to date.
[Modules] Checking for module updates at https://discordapp.com/api/modules/stable/versions.json
[Modules] No module updates available.
[15047:0621/195731.956656:ERROR:buffer_manager.cc(488)] [.DisplayCompositor]GL ERROR :GL_INVALID_OPERATION : glBufferData: <- error from previous GL command
[Modules] Starting to install discord_krisp...
[Modules] Fetching discord_krisp@0 from https://discordapp.com/api/modules/stable/discord_krisp/0
[Modules] Streaming discord_krisp@0 to /home/scott/.config/discord/0.0.10/modules/pending/discord_krisp-0.zip
Error downloading with electron net: HTTP Error: Status Code 403
Falling back to node net library..
(electron) 'isAccessibilitySupportEnabled function' is deprecated and will be removed. Please use 'accessibilitySupportEnabled property' instead.
(electron) 'setBadgeCount function' is deprecated and will be removed. Please use 'badgeCount property' instead.
[Modules] Failed fetching module discord_krisp@0: Error: HTTP Error: Status Code 403
[Modules] Finished module downloads. [success: 0] [failure: 1]
Failed to get crash dump id.
Report Id: 
Segmentation fault (core dumped)

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.

Forum kindly sponsored by