Error in sensord status. Can anyone help to get rid of that?

$ systemctl status sensord
● sensord.service - Log hardware monitoring data
     Loaded: loaded (/usr/lib/systemd/system/sensord.service; enabled; vendor preset: disabled)
     Active: active (running) since Sat 2020-07-25 21:23:51 IST; 11min ago
   Main PID: 731 (sensord)
      Tasks: 1 (limit: 9343)
     Memory: 5.8M
     CGroup: /system.slice/sensord.service
             └─731 /usr/sbin/sensord -i 60s -l 30m -f daemon

Jul 25 21:23:51 Predator sensord[731]:   Core 5: 55.0 C
Jul 25 21:23:51 Predator sensord[731]: Chip: pch_cannonlake-virtual-0
Jul 25 21:23:51 Predator sensord[731]: Adapter: Virtual device
Jul 25 21:23:51 Predator sensord[731]:   temp1: 55.0 C
Jul 25 21:23:51 Predator sensord[731]: Chip: iwlwifi_1-virtual-0
Jul 25 21:23:51 Predator sensord[731]: Adapter: Virtual device
Jul 25 21:23:51 Predator sensord[731]: Error getting sensor data: iwlwifi_1/#0: Can't read
Jul 25 21:23:51 Predator sensord[731]: sensor read error (-1)
Jul 25 21:23:51 Predator systemd[1]: Started Log hardware monitoring data.
Jul 25 21:35:01 Predator systemd[1]: /usr/lib/systemd/system/sensord.service:8: PIDFile= referen>

Edit :-

$ systemctl --user --failed && systemctl --failed
  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.
  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

$ sudo journalctl -p 3 -xb
[sudo] password for lucifer: 
-- Logs begin at Sat 2020-07-25 14:51:40 IST, end at Sat 2020-07-25 21:41:22 IST. --
Jul 25 21:23:50 Predator systemd-udevd[358]: Error running install command '/bin/false' for modu>
Jul 25 21:23:50 Predator systemd-udevd[358]: Error running install command '/bin/false' for modu>
Jul 25 21:23:51 Predator sensord[731]: Error getting sensor data: iwlwifi_1/#0: Can't read
Jul 25 21:23:52 Predator kernel: iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS
Jul 25 21:23:52 Predator kernel: iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS
Jul 25 21:23:52 Predator wpa_supplicant[982]: nl80211: kernel reports: Attribute failed policy v>
Jul 25 21:23:52 Predator wpa_supplicant[982]: Failed to create interface p2p-dev-wlp0s20f3: -22 >
Jul 25 21:23:52 Predator wpa_supplicant[982]: nl80211: Failed to create a P2P Device interface p>
Jul 25 21:24:05 Predator kernel: iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS
Jul 25 21:24:05 Predator kernel: iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS
Jul 25 21:24:08 Predator kwin_x11[1158]: kwin_xkbcommon: XKB: couldn't find a Compose file for l>
Jul 25 21:24:10 Predator kernel: snd_hda_codec_hdmi hdaudioC1D0: Unable to sync register 0x7f080>
Jul 25 21:24:10 Predator kernel: snd_hda_codec_hdmi hdaudioC1D0: out of range cmd 0:7:707:ffffff>
Jul 25 21:24:10 Predator kernel: snd_hda_codec_hdmi hdaudioC1D0: out of range cmd 0:7:707:ffffff>
Jul 25 21:24:10 Predator kernel: snd_hda_codec_hdmi hdaudioC1D0: out of range cmd 0:7:707:ffffff>
Jul 25 21:24:10 Predator kernel: snd_hda_codec_hdmi hdaudioC1D0: out of range cmd 0:7:707:ffffff>
Jul 25 21:24:10 Predator kernel: snd_hda_codec_hdmi hdaudioC1D0: out of range cmd 0:7:707:ffffff>
Jul 25 21:24:10 Predator kernel: snd_hda_codec_hdmi hdaudioC1D0: out of range cmd 0:7:707:ffffff>
Jul 25 21:24:10 Predator bluetoothd[780]: RFCOMM server failed for Headset Voice gateway: rfcomm>
Jul 25 21:24:10 Predator bluetoothd[780]: RFCOMM server failed for :1.59/Profile/HSPHSProfile/00>
Jul 25 21:24:12 Predator kernel: iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS
Jul 25 21:24:24 Predator kernel: snd_hda_codec_hdmi hdaudioC1D0: Unable to sync register 0x7f010>
Jul 25 21:33:15 Predator kernel: snd_hda_codec_hdmi hdaudioC1D0: Unable to sync register 0x7f010>

Please help to get rid of that error.

It would be useful to have more information on the hardware you use.

inxi --full --verbosity=7 --filter --no-host

iwlwifi is the driver for many intel based chips.

Could you please also post the output of

sensors

so we can see what is actually displayed? Your last output is also capped at the end of the line(s).

Here it is

$ sensors
iwlwifi_1-virtual-0
Adapter: Virtual device
temp1:        +41.0°C  

pch_cannonlake-virtual-0
Adapter: Virtual device
temp1:        +51.0°C  

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +43.0°C  (high = +100.0°C, crit = +100.0°C)
Core 0:        +43.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:        +43.0°C  (high = +100.0°C, crit = +100.0°C)
Core 2:        +42.0°C  (high = +100.0°C, crit = +100.0°C)
Core 3:        +42.0°C  (high = +100.0°C, crit = +100.0°C)
Core 4:        +42.0°C  (high = +100.0°C, crit = +100.0°C)
Core 5:        +42.0°C  (high = +100.0°C, crit = +100.0°C)

BAT1-acpi-0
Adapter: ACPI interface
in0:          15.10 V  
curr1:       953.00 mA

The sensors seem to work. We still don't know your hardware setup. Please refer to this link on how to properly provide and format the output needed.

I'm sorry Forgot to do the formatting.
Hardware Specs :-
Acer Predator Helios 300 PH315-51
i7 8750H
8 Gb Ram

I was talking about this bit.

$ sensorsinxi --full --verbosity=7 --filter --no-host
bash: sensorsinxi: command not found
[lucifer@Predator ~]$ inxi --full --verbosity=7 --filter --no-host
System:    Kernel: 5.4.52-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.1.0 Desktop: KDE Plasma 5.19.3 tk: Qt 5.15.0 
           wm: kwin_x11 dm: SDDM Distro: Manjaro Linux 
Machine:   Type: Laptop System: Acer product: Predator PH315-51 v: V1.26 serial: <filter> 
           Mobo: CFL model: Sienta_CFS v: V1.26 serial: <filter> UEFI: Insyde v: 1.26 date: 03/27/2019 
Battery:   ID-1: BAT1 charge: 24.1 Wh condition: 39.3/48.9 Wh (80%) volts: 15.0/15.2 model: LG PABAS0241231 type: Li-ion 
           serial: <filter> status: Discharging 
Memory:    RAM: total: 7.62 GiB used: 1.24 GiB (16.2%) 
           RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
CPU:       Topology: 6-Core model: Intel Core i7-8750H bits: 64 type: MT MCP arch: Kaby Lake rev: A L2 cache: 9216 KiB 
           bogomips: 52815 
           Speed: 1400 MHz min/max: 800/2200 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 5: 1400 6: 1400 7: 1400 
           8: 1400 9: 1400 10: 1401 11: 1401 12: 1401 
           Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon art avx avx2 bmi1 bmi2 bts clflush 
           clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est f16c 
           flexpriority flush_l1d fma fpu fsgsbase fxsr ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs ida intel_pt 
           invpcid invpcid_single lahf_lm lm mca mce md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat pbe 
           pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts rdrand rdseed rdtscp rep_good sdbg sep smap 
           smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx 
           vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr 
Graphics:  Device-1: Intel UHD Graphics 630 vendor: Acer Incorporated ALI driver: i915 v: kernel bus ID: 00:02.0 
           chip ID: 8086:3e9b 
           Display: x11 server: X.Org 1.20.8 driver: intel compositor: kwin_x11 resolution: 1920x1080~60Hz 
           OpenGL: renderer: Mesa Intel UHD Graphics 630 (CFL GT2) v: 4.6 Mesa 20.1.3 direct render: Yes 
Audio:     Device-1: Intel Cannon Lake PCH cAVS vendor: Acer Incorporated ALI driver: snd_hda_intel v: kernel bus ID: 00:1f.3 
           chip ID: 8086:a348 
           Device-2: NVIDIA GP107GL High Definition Audio driver: snd_hda_intel v: kernel bus ID: 01:00.1 chip ID: 10de:0fb9 
           Sound Server: ALSA v: k5.4.52-1-MANJARO 
Network:   Device-1: Intel Wireless-AC 9560 [Jefferson Peak] driver: iwlwifi v: kernel port: 5000 bus ID: 00:14.3 
           chip ID: 8086:a370 
           IF: wlp0s20f3 state: up mac: <filter> 
           IP v4: <filter> type: dynamic noprefixroute scope: global broadcast: <filter> 
           IP v6: <filter> type: noprefixroute scope: link 
           Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Acer Incorporated ALI driver: r8169 
           v: kernel port: 3000 bus ID: 06:00.1 chip ID: 10ec:8168 
           IF: enp6s0f1 state: down mac: <filter> 
           WAN IP: <filter> 
Drives:    Local Storage: total: 1.03 TiB used: 8.16 GiB (0.8%) 
           ID-1: /dev/sda vendor: SK Hynix model: HFS128G39TND-N210A size: 119.24 GiB speed: 6.0 Gb/s serial: <filter> 
           rev: 1P10 scheme: GPT 
           ID-2: /dev/sdb vendor: HGST (Hitachi) model: HTS721010A9E630 size: 931.51 GiB speed: 6.0 Gb/s rotation: 7200 rpm 
           serial: <filter> rev: A3J0 scheme: GPT 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / size: 86.76 GiB used: 8.16 GiB (9.4%) fs: ext4 dev: /dev/sda7 label: N/A 
           uuid: f862f40b-3214-4d99-a3ec-37c5006163a4 
           ID-2: /boot/efi size: 499.0 MiB used: 280 KiB (0.1%) fs: vfat dev: /dev/sda6 label: N/A uuid: 3A04-5656 
Unmounted: ID-1: /dev/sda1 size: 100.0 MiB fs: vfat label: N/A uuid: 0C8D-CF7C 
           ID-2: /dev/sda2 size: 16.0 MiB fs: <root required> label: N/A uuid: N/A 
           ID-3: /dev/sda3 size: 29.38 GiB fs: ntfs label: N/A uuid: 4E169E32169E1AD3 
           ID-4: /dev/sda4 size: 513.0 MiB fs: ntfs label: N/A uuid: 389C237F9C2336B2 
           ID-5: /dev/sda5 size: 100.0 MiB fs: <root required> label: N/A uuid: N/A 
           ID-6: /dev/sdb1 size: 931.51 GiB fs: ext4 label: N/A uuid: c94d185c-f75f-453b-bc8b-aff8bc598341 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 16 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Device-1: 1-4:2 info: Logitech G203 Gaming Mouse type: Mouse,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 
           speed: 12 Mb/s chip ID: 046d:c084 serial: <filter> 
           Device-2: 1-5:3 info: Quanta HD Webcam type: Video driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0408:a060 serial: <filter> 
           Device-3: 1-14:4 info: Intel type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 8087:0aaa 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 8 rev: 3.1 speed: 10 Gb/s chip ID: 1d6b:0003 
Sensors:   System Temperatures: cpu: 53.0 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Info:      Processes: 259 Uptime: 40m Init: systemd v: 245 Compilers: gcc: 10.1.0 Shell: bash v: 5.0.18 running in: konsole 
           inxi: 3.0.37

Thank you for providing relevant information and formatting it.

Your sensor output seems to work, so you can safely ignore the error from the sensors.

Does your audio output via HDMI work?

EDIT: Your battery is heavily degraded for such a "young" device.

Your battery is heavily degraded for such a "young" device.

Yes. Dumb me, used to plug all the time to power source.

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.

Forum kindly sponsored by