Freeze after boot / system settings

  Host: peupc Kernel: 4.19.4-arch1-1-ARCH x86_64 bits: 64 compiler: gcc v: 8.2.1 
  Desktop: KDE Plasma 5.14.4 tk: Qt 5.11.2 wm: kwin_x11 dm: SDDM Distro: Arch Linux 
  Type: Laptop System: ASUSTeK product: Strix 17 GL703GE v: 1.0 serial: <filter> 
  Mobo: ASUSTeK model: GL703GE v: 1.0 serial: <filter> UEFI: American Megatrends 
  v: GL703GE.310 date: 06/11/2018 
  ID-1: BAT1 charge: 61.9 Wh condition: 61.7/64.4 Wh (96%) volts: 5.4/15.2 
  model: ASUS A32-K55 type: Li-ion serial: <filter> status: Unknown 
  Topology: 6-Core model: Intel Core i7-8750H bits: 64 type: MT MCP arch: Kaby Lake 
  rev: A L2 cache: 9216 KiB 
  flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 53004 
  Speed: 900 MHz min/max: 800/4100 MHz Core speeds (MHz): 1: 900 2: 900 3: 900 
  4: 900 5: 900 6: 900 7: 900 8: 900 9: 900 10: 900 11: 900 12: 900 
  Device-1: Intel UHD Graphics 630 vendor: ASUSTeK driver: i915 v: kernel 
  bus ID: 00:02.0 chip ID: 8086:3e9b 
  Device-2: NVIDIA GP107M [GeForce GTX 1050 Ti Mobile] vendor: ASUSTeK 
  driver: nouveau v: kernel bus ID: 01:00.0 chip ID: 10de:1c8c 
  Display: x11 server: 1.20.3 driver: modesetting 
  alternate: fbdev,intel,nouveau,nv,vesa compositor: kwin_x11 
  resolution: <xdpyinfo missing> 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
  Device-1: Intel Cannon Lake PCH cAVS vendor: ASUSTeK driver: snd_hda_intel 
  v: kernel bus ID: 00:1f.3 chip ID: 8086:a348 
  Sound Server: ALSA v: k4.19.4-arch1-1-ARCH 
  Device-1: Intel Wireless-AC 9560 [Jefferson Peak] driver: iwlwifi v: kernel 
  port: 5000 bus ID: 00:14.3 chip ID: 8086:a370 
  IF: wlo1 state: down mac: <filter> 
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK 
  driver: r8169 v: kernel port: 3000 bus ID: 02:00.0 chip ID: 10ec:8168 
  IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
  Local Storage: total: 1.14 TiB used: 6.54 GiB (0.6%) 
  ID-1: /dev/sda vendor: Micron model: 1100 MTFDDAV256TBN size: 238.47 GiB 
  speed: 6.0 Gb/s serial: <filter> rev: A031 scheme: GPT 
  ID-2: /dev/sdb vendor: Seagate model: ST1000LM035-1RK172 size: 931.51 GiB 
  speed: 6.0 Gb/s rotation: 5400 rpm serial: <filter> rev: SDM4 scheme: GPT 
  ID-1: / size: 217.10 GiB used: 6.49 GiB (3.0%) fs: ext4 dev: /dev/sda4 
  ID-2: /boot size: 1022.0 MiB used: 55.0 MiB (5.4%) fs: vfat dev: /dev/sda1 
  ID-3: swap-1 size: 15.89 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda3 
  System Temperatures: cpu: 45.0 C mobo: N/A gpu: nouveau temp: 511 C 
  Fan Speeds (RPM): cpu: 0 
  Processes: 251 Uptime: 3h 55m Memory: 15.52 GiB used: 1.16 GiB (7.5%) 
  Init: systemd v: 239 Compilers: gcc: 8.2.1 Shell: bash v: 4.4.23 
  running in: konsole inxi: 3.0.28


I have been using Manjaro on my desktop for a few years, I moved to a laptop a few days ago, but every time I install Manjaro my system freezes completely, either that or when I open system settings, the common thing I can "understand" on both cases is the fan spinning at full speed. I tried to install the proprietary drivers but after that I just can't boot I get stuck on a black screen.
I can only use Arch, otherwise the system freezes, I want to use Manjaro since it uses the hybrid graphics with not much config needed but I'm not even able to setup.

Can anyone help me please?

What captured my attention is this:

I can't see how the CPU could have same frequency scaling at the point of reading the inxi. I would definitely look on what is the governor for CPU scaling
cpupower frequency-info
watch grep \"cpu MHz\" /proc/cpuinfo

It seems you didn't succeed

Try to:
sudo pacman -R xf86-video-intel
probably also delete 20-intel.conf
Install the bumblebee as described here

And follow this:

Do all this from TTY, close any desktop session you have, so the system doesn't freeze while you make the changes.

or you can try optimus-manager

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.

Forum kindly sponsored by