Grub installation failed

Hi, I just got into the new World in Manjaro linux.
I install on my ASUS S510U laptop with dualboot Win10.
After installing the Manjaro linux after partitioning the new free space in my hard drive, I cannot get into manjaro linux because of grub fails.
So I did manjaro linux : restore the grub bootloader
After that, it still doesn't work out well.
Is there anybody having same problem like me?

A search about it would reveal that there are a few people experiencing issues with grub, but also you would find the fix. Read and apply the method for your particular issue:

Look at this first.
OP has an Asus, not a Lenovo.
Not that serious and hopefully can be fixed without the Asus bios setup.

Hi, and Thanks for suggestion. I also followed all instruction on the post.
But the result didn't come out...
here's the log file of the commands
efibootmgr -v
sudo parted -l
sudo blkid
findmnt -s
findmnt /boot/efi
Those are what I did for log

BootCurrent: 0003
Timeout: 1 seconds
BootOrder: 0003,0001,0000,0002,0004
Boot0000* Windows Boot Manager	HD(3,GPT,4d014380-bf24-4a36-85b3-0599121e2533,0x101000,0x32000)/File(\EFI\MICROSOFT\BOOT\BOOTMGFW.EFI)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.}...n................
Boot0001* Manjaro	HD(3,GPT,4d014380-bf24-4a36-85b3-0599121e2533,0x101000,0x32000)/File(\GRUBX64.EFI)
Boot0002* SanDisk SD8SN8U256G1002	BBS(HD,,0x0)..GO..NO........o.S.a.n.D.i.s.k. .S.D.8.S.N.8.U.2.5.6.G.>..Gd-.;.A..MQ..L. . . . . . . . ........BO..NO........c.M.e.l.R.o.s.e. .4.G.B. .;.A..MQ..L.M.L.
Boot0003* UEFI: MelRose 4GB 1100	PciRoot(0x0)/Pci(0x14,0x0)/USB(3,0)/CDROM(1,0x367b98,0x8000)..BO
Boot0004* UEFI: MelRose 4GB 1100, Partition 2	PciRoot(0x0)/Pci(0x14,0x0)/USB(3,0)/HD(2,MBR,0x20fa5dee,0x367b98,0x2000)..BO
Model: ATA SanDisk SD8SN8U2 (scsi)
Disk /dev/sda: 256GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags: 

Number  Start   End     Size    File system     Name                          Flags
 1      1049kB  67.1MB  66.1MB  ntfs            Basic data partition          msftdata
 2      67.1MB  539MB   472MB   ntfs            Basic data partition          hidden, diag
 3      539MB   644MB   105MB   fat32           EFI system partition          boot, esp
 4      644MB   661MB   16.8MB                  Microsoft reserved partition  msftres
 5      661MB   178GB   178GB   ntfs            Basic data partition          msftdata
 7      178GB   189GB   10.5GB  ext4
 8      189GB   252GB   62.9GB  ext4
 6      252GB   256GB   4294MB  linux-swap(v1)

Model: MelRose 4GB (scsi)
Disk /dev/sdb: 4010MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags: 

Number  Start   End     Size    Type     File system  Flags
 1      32.8kB  1828MB  1828MB  primary               boot
 2      1828MB  1832MB  4194kB  primary               esp

/dev/sda1: UUID="44A02754A0274BAC" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="c1bdfbc9-1188-4e48-b9e9-ea755b240ff9"
/dev/sda2: UUID="98267F21267F0014" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="5009d76a-6faa-4ed1-b689-ea7326783fdb"
/dev/sda3: UUID="483E-B286" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="4d014380-bf24-4a36-85b3-0599121e2533"
/dev/sda4: PARTLABEL="Microsoft reserved partition" PARTUUID="f24e7b56-ceaa-4640-8153-0fc3cb6752b1"
/dev/sda5: UUID="926E5FBD6E5F98B5" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="90476355-e4ca-4c69-9722-ae59d7df1bc7"
/dev/sda6: LABEL="eos-swap" UUID="70e073a2-3cb4-4227-9181-41910a51fe23" TYPE="swap" PARTUUID="0120fd96-0b1d-499e-a3f2-9f6c07fc962b"
/dev/sda7: UUID="32209ea2-ea23-469f-8647-99159b53e8b3" TYPE="ext4" PARTUUID="6757438b-b996-4097-81fc-b1744a92df8e"
/dev/sda8: UUID="054656aa-f028-43ae-854c-a259b9516afe" TYPE="ext4" PARTUUID="2b5f5143-ee27-4af6-9ab1-94e744577d3a"
/dev/sdb1: UUID="2018-05-07-18-00-47-00" LABEL="MJR17110" TYPE="iso9660" PARTUUID="20fa5dee-01"
/dev/sdb2: SEC_TYPE="msdos" LABEL="MISO_EFI" UUID="2EA9-60EC" TYPE="vfat" PARTUUID="20fa5dee-02"

TARGET    SOURCE                                    FSTYPE OPTIONS
/boot/efi UUID=483E-B286                            vfat   defaults,noatime
/         UUID=32209ea2-ea23-469f-8647-99159b53e8b3 ext4   defaults,noatime,discard
/home     UUID=054656aa-f028-43ae-854c-a259b9516afe ext4   defaults,noatime,discard
swap      UUID=70e073a2-3cb4-4227-9181-41910a51fe23 swap   defaults,noatime,discard
/tmp      tmpfs                                     tmpfs  defaults,noatime,mode=1777
/boot/efi /dev/sda3 vfat   rw,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro

Yup, you did all the commands including the [UEFI - additional commands] at step 6.

Now, further down in "Some difficult UEFI setups", there is Asus link.
Go there and see if there is anything in the F2 Bios setup for your system that is similar.
It may be possible your Asus setup is slightly different and is so, after figuring out how to get it into the Asus firmware, detail it here so we can link it so others can learn from it.


One point I forgot ..(sorry)
There's one more thing you should do.
At Manjaro terminal, please do

sudo efibootmgr -o 0001,0000

Let us know is after reboot , at terminal, provide


This alone may be sufficient, again, sorry I forgot this first thing to do.

Thanks for keeping the help. I really appreciate on that.
I just did pacman update, and then the manjaro linux could display grep screen when boot up.
Thanks for helping :slight_smile:

1 Like

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.

Forum kindly sponsored by