How to see temperatures and usage patterns

hello there

i am a new upstart twitch streamer looking to get out of win10 cause i hate it, then looked for a gamer/streamer based destro hopped on mint 19.1 found some issues and then found the latest "manjaro gaming edition" version. after some trial and error with the installer i got it up and running and i think i have installed wine correctly i am dual booted at the moment. there are small hitches in browser crashing, full lock ups where i have to hard reset either internet or OBS crashing as i am streaming (maybe it is a instability in the frame work of this spin on manjaro or whatever)

NOW on to kind of the main point of this so i like using the NZXT CAM monitoring software on win10 to see temps and usage patterns as i'm streaming is there a way to get that on jaro i have winetrinks installed or is there something native like it that i can run.

thanks again i'm linux stoopid BUT just thought i'd ask



Mind you, but the information provided is not going to help. See this first:

Welcome to Manjaro.
Since you're new, I really suggest you use one of the official editions (KDE, Xfce, Gnome). But if you've already installed the Gaming edition, you can of course continue with that (if you're happy with it).

In order to see temps and other sensor readings, there are quite a few tools for that like e.g. sensors from package lm-sensors, as well as tons of widgets for KDE/Gnome/Xfce. I wouldn't use any Windows sensor reading tools via Wine, or more generally, only use Wine if you don't have a native alternative.


hmm i see yeah i know about LM sensors i'm just looking for something with the layout of CAM as that is a simple read out lol i'll look around the xfce version seeing as the gaming version is based off it...

Xfce has a widget for temperatures which you can put in your task bar.
I have no clue about CAM though.

For monitoring you could also use conky, and make it look like a spaceship cockpit ... but since your main issue was OBS crashing, some information about your setup is important.

2700x vega56 1200w psu 3 one terabit drives,asus crosshair motherboard and an m.2 as boot drive/ a bit of game storage case coolermaster 932 advanced two monitor setup ...and dual booted manjaro/win10.. looking to clone my windows to a spare ssd and only run jaro till i need windows....

By information, as pointed out in my previous post link, is to provide from terminal:
inxi -Fxxxz
and not a vague description :slight_smile:


System: Host: anyil-pc Kernel: 4.19.32-1-MANJARO x86_64 bits: 64 compiler: gcc v: 8.2.1 Desktop: Xfce 4.13.3git-UNKNOWN
Distro: Manjaro Linux
Machine: Type: Desktop Mobo: ASUSTeK model: CROSSHAIR VI HERO v: Rev 1.xx serial: UEFI: American Megatrends v: 6401
date: 12/07/2018
CPU: Topology: 8-Core model: AMD Ryzen 7 2700X bits: 64 type: MT MCP arch: Zen+ rev: 2 L2 cache: 4096 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 135249
Speed: 4049 MHz min/max: 2200/4225 MHz Core speeds (MHz): 1: 4225 2: 4224 3: 4228 4: 4222 5: 4184 6: 4181 7: 4224
8: 4234 9: 2112 10: 2112 11: 2112 12: 2112 13: 2584 14: 2114 15: 2112 16: 2114
Graphics: Device-1: Advanced Micro Devices [AMD/ATI] Vega 10 XL/XT [Radeon RX Vega 56/64] vendor: Sapphire Limited
driver: amdgpu v: kernel bus ID: 0c:00.0
Display: x11 server: X.Org 1.20.4 driver: amdgpu,ati unloaded: modesetting
resolution: 1920x1080~60Hz, 1920x1080~60Hz
OpenGL: renderer: Radeon RX Vega (VEGA10 DRM 3.27.0 4.19.32-1-MANJARO LLVM 8.0.0) v: 4.5 Mesa 19.0.1
direct render: Yes
Audio: Device-1: Advanced Micro Devices [AMD/ATI] Vega 10 HDMI Audio [Radeon Vega 56/64] driver: snd_hda_intel v: kernel
bus ID: 0c:00.1
Device-2: Advanced Micro Devices [AMD] Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus ID: 0e:00.3
Device-3: Logitech HD Webcam C615 type: USB driver: snd-usb-audio,uvcvideo bus ID: 1-14:4
Device-4: Blue Microphones type: USB driver: hid-generic,snd-usb-audio,usbhid bus ID: 1-8:2
Sound Server: ALSA v: k4.19.32-1-MANJARO
Network: Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: 5.4.0-k port: e000 bus ID: 04:00.0
IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac:
Drives: Local Storage: total: 3.18 TiB used: 60.24 GiB (1.8%)
ID-1: /dev/sda vendor: Seagate model: ST1000DM003-1ER162 size: 931.51 GiB
ID-2: /dev/sdb vendor: Seagate model: ST1000DM003-1ER162 size: 931.51 GiB
ID-3: /dev/sdc vendor: Seagate model: ST1000DM003-1ER162 size: 931.51 GiB
ID-4: /dev/sdd vendor: Crucial model: CT500MX500SSD4 size: 465.76 GiB
Partition: ID-1: / size: 110.66 GiB used: 60.21 GiB (54.4%) fs: ext4 dev: /dev/sdd5
Sensors: System Temperatures: cpu: 35.1 C mobo: N/A gpu: amdgpu temp: 35 C
Fan Speeds (RPM): cpu: 0 gpu: amdgpu fan: 1606
Info: Processes: 322 Uptime: 11m Memory: 31.40 GiB used: 2.02 GiB (6.4%) Init: systemd Compilers: gcc: 8.2.1 Shell: bash
v: 5.0.2 inxi: 3.0.32

I would recommend to read this entire topic

there are a few things that might help you out with the video and OBS thing ...


found Psensor lol i'll be alright now.

admin can close or may delete thread myself...

You will need a conky that will suit your needs. There are plenty of examples from simple to more graphical (using lua)

To be displayed on the secondary monitor, you have to use:
xinerama_head 2
in the config part of the conky, top lines above TEXT - if you are using the old syntax, or
xinerama_head = 2,
if you are using the new sintax.

More information about it

Yes, there are countless widgets/gadgets/plugins and tools to monitor the system and have a nice interface...


This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.

Forum kindly sponsored by