Yep, I am connected and tried both wired and wireless, booting from live usb. Used rufus 2.17 to burn KDE version and 2.18 for Gnome.
Speaking about wireless, built-in wifi does not sees more than a half of networks, so I used usb dongle. But I'll fix it after installation 
Well, if you can boot, the issue does not come from Rufus.
Since you are stuck at "Configure the hardware", you may take a look at this.
Do you have an output when you enter the following in the console?
mhwd -lh -d --pciNB: I have personally never experienced issues with driver installation with Manjaro, so I am trying to explore what may be wrong .
2 Likes
There it is:
06: PCI 1f.3: 0c05 SMBus
SysFS ID: /devices/pci0000:00/0000:00:1f.3
SysFS BusID: 0000:00:1f.3
Hardware Class: unknown
Model: "Intel 7 Series/C216 Chipset Family SMBus Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x1e22 "7 Series/C216 Chipset Family SMBus Controller"
SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
SubDevice: pci 0x0647
Revision: 0x04
Driver: "i801_smbus"
Driver Modules: "i2c_i801"
Memory Range: 0xb3615000-0xb36150ff (rw,non-prefetchable)
I/O Ports: 0x3040-0x305f (rw)
IRQ: 19 (no events)
Module Alias: "pci:v00008086d00001E22sv00001025sd00000647bc0Csc05i00"
Driver Info #0:
Driver Status: i2c_i801 is active
Driver Activation Cmd: "modprobe i2c_i801"
07: PCI 00.0: 0600 Host bridge
SysFS ID: /devices/pci0000:00/0000:00:00.0
SysFS BusID: 0000:00:00.0
Hardware Class: bridge
Model: "Intel 3rd Gen Core processor DRAM Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x0154 "3rd Gen Core processor DRAM Controller"
SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
SubDevice: pci 0x0647
Revision: 0x09
Driver: "ivb_uncore"
Module Alias: "pci:v00008086d00000154sv00001025sd00000647bc06sc00i00"
08: PCI 1c.1: 0604 PCI bridge (Normal decode)
SysFS ID: /devices/pci0000:00/0000:00:1c.1
SysFS BusID: 0000:00:1c.1
Hardware Class: bridge
Model: "Intel 7 Series/C210 Series Chipset Family PCI Express Root Port 2"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x1e12 "7 Series/C210 Series Chipset Family PCI Express Root Port 2"
SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
SubDevice: pci 0x0647
Revision: 0xc4
Driver: "pcieport"
IRQ: 16 (410 events)
Module Alias: "pci:v00008086d00001E12sv00001025sd00000647bc06sc04i00"
Driver Info #0:
Driver Status: shpchp is active
Driver Activation Cmd: "modprobe shpchp"
09: PCI 200.3: 0880 System peripheral
SysFS ID: /devices/pci0000:00/0000:00:1c.0/0000:02:00.3
SysFS BusID: 0000:02:00.3
Hardware Class: unknown
Model: "Broadcom BCM57765/57785 xD-Picture Card Reader"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x16bf "BCM57765/57785 xD-Picture Card Reader"
SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
SubDevice: pci 0x0647
Revision: 0x10
Memory Range: 0xb3420000-0xb342ffff (ro,non-prefetchable)
IRQ: 11 (no events)
Module Alias: "pci:v000014E4d000016BFsv00001025sd00000647bc08sc80i00"
Attached to: #17 (PCI bridge)
10: PCI 200.1: 0805 SD Host controller
SysFS ID: /devices/pci0000:00/0000:00:1c.0/0000:02:00.1
SysFS BusID: 0000:02:00.1
Hardware Class: unknown
Model: "Broadcom BCM57765/57785 SDXC/MMC Card Reader"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x16bc "BCM57765/57785 SDXC/MMC Card Reader"
SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
SubDevice: pci 0x0647
Revision: 0x10
Driver: "sdhci-pci"
Driver Modules: "sdhci_pci"
Memory Range: 0xb3400000-0xb340ffff (ro,non-prefetchable)
IRQ: 17 (97 events)
Module Alias: "pci:v000014E4d000016BCsv00001025sd00000647bc08sc05i01"
Driver Info #0:
Driver Status: sdhci_pci is active
Driver Activation Cmd: "modprobe sdhci_pci"
Attached to: #17 (PCI bridge)
11: PCI 1a.0: 0c03 USB Controller (EHCI)
SysFS ID: /devices/pci0000:00/0000:00:1a.0
SysFS BusID: 0000:00:1a.0
Hardware Class: usb controller
Model: "Intel 7 Series/C216 Chipset Family USB Enhanced Host Controller #2"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x1e2d "7 Series/C216 Chipset Family USB Enhanced Host Controller #2"
SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
SubDevice: pci 0x0647
Revision: 0x04
Driver: "ehci-pci"
Driver Modules: "ehci_pci"
Memory Range: 0xb3619000-0xb36193ff (rw,non-prefetchable)
IRQ: 16 (410 events)
Module Alias: "pci:v00008086d00001E2Dsv00001025sd00000647bc0Csc03i20"
Driver Info #0:
Driver Status: ehci-hcd is active
Driver Activation Cmd: "modprobe ehci-hcd"
Driver Info #1:
Driver Status: ehci_pci is active
Driver Activation Cmd: "modprobe ehci_pci"
12: PCI 1d.0: 0c03 USB Controller (EHCI)
SysFS ID: /devices/pci0000:00/0000:00:1d.0
SysFS BusID: 0000:00:1d.0
Hardware Class: usb controller
Model: "Intel 7 Series/C216 Chipset Family USB Enhanced Host Controller #1"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x1e26 "7 Series/C216 Chipset Family USB Enhanced Host Controller #1"
SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
SubDevice: pci 0x0647
Revision: 0x04
Driver: "ehci-pci"
Driver Modules: "ehci_pci"
Memory Range: 0xb3618000-0xb36183ff (rw,non-prefetchable)
IRQ: 23 (35 events)
Module Alias: "pci:v00008086d00001E26sv00001025sd00000647bc0Csc03i20"
Driver Info #0:
Driver Status: ehci-hcd is active
Driver Activation Cmd: "modprobe ehci-hcd"
Driver Info #1:
Driver Status: ehci_pci is active
Driver Activation Cmd: "modprobe ehci_pci"
13: PCI 02.0: 0300 VGA compatible controller (VGA)
SysFS ID: /devices/pci0000:00/0000:00:02.0
SysFS BusID: 0000:00:02.0
Hardware Class: graphics card
Model: "Intel 3rd Gen Core processor Graphics Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x0166 "3rd Gen Core processor Graphics Controller"
SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
SubDevice: pci 0x0647
Revision: 0x09
Driver: "i915"
Driver Modules: "i915"
Memory Range: 0xb3000000-0xb33fffff (rw,non-prefetchable)
Memory Range: 0xc0000000-0xcfffffff (ro,non-prefetchable)
I/O Ports: 0x3000-0x303f (rw)
Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled)
IRQ: 26 (2589 events)
Module Alias: "pci:v00008086d00000166sv00001025sd00000647bc03sc00i00"
Driver Info #0:
Driver Status: i915 is active
Driver Activation Cmd: "modprobe i915"
14: PCI 14.0: 0c03 USB Controller (XHCI)
SysFS ID: /devices/pci0000:00/0000:00:14.0
SysFS BusID: 0000:00:14.0
Hardware Class: usb controller
Model: "Intel 7 Series/C210 Series Chipset Family USB xHCI Host Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x1e31 "7 Series/C210 Series Chipset Family USB xHCI Host Controller"
SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
SubDevice: pci 0x0647
Revision: 0x04
Driver: "xhci_hcd"
Driver Modules: "xhci_pci"
Memory Range: 0xb3600000-0xb360ffff (rw,non-prefetchable)
IRQ: 24 (58700 events)
Module Alias: "pci:v00008086d00001E31sv00001025sd00000647bc0Csc03i30"
Driver Info #0:
Driver Status: xhci_pci is active
Driver Activation Cmd: "modprobe xhci_pci"
15: PCI 1f.2: 0106 SATA controller (AHCI 1.0)
SysFS ID: /devices/pci0000:00/0000:00:1f.2
SysFS BusID: 0000:00:1f.2
Hardware Class: storage
Model: "Intel 7 Series Chipset Family 6-port SATA Controller [AHCI mode]"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x1e03 "7 Series Chipset Family 6-port SATA Controller [AHCI mode]"
SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
SubDevice: pci 0x0647
Revision: 0x04
Driver: "ahci"
Driver Modules: "ahci"
I/O Ports: 0x3088-0x308f (rw)
I/O Ports: 0x3094-0x3097 (rw)
I/O Ports: 0x3080-0x3087 (rw)
I/O Ports: 0x3090-0x3093 (rw)
I/O Ports: 0x3060-0x307f (rw)
Memory Range: 0xb3617000-0xb36177ff (rw,non-prefetchable)
IRQ: 27 (559 events)
Module Alias: "pci:v00008086d00001E03sv00001025sd00000647bc01sc06i01"
Driver Info #0:
Driver Status: ahci is active
Driver Activation Cmd: "modprobe ahci"
16: PCI 300.0: 0200 Ethernet controller
SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:03:00.0
SysFS BusID: 0000:03:00.0
Hardware Class: network
Model: "Broadcom BCM43228 802.11a/b/g/n"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4359 "BCM43228 802.11a/b/g/n"
SubVendor: pci 0x105b "Foxconn International, Inc."
SubDevice: pci 0xe04b
Driver: "bcma-pci-bridge"
Driver Modules: "bcma"
Device File: wlp3s0b1
Memory Range: 0xb3500000-0xb3503fff (rw,non-prefetchable)
IRQ: 17 (97 events)
HW Address: 2a:80:47:09:4a:47
Permanent HW Address: 08:ed:b9:f8:15:63
Link detected: no
Module Alias: "pci:v000014E4d00004359sv0000105Bsd0000E04Bbc02sc80i00"
Driver Info #0:
Driver Status: bcma is active
Driver Activation Cmd: "modprobe bcma"
Attached to: #8 (PCI bridge)
17: PCI 1c.0: 0604 PCI bridge (Normal decode)
SysFS ID: /devices/pci0000:00/0000:00:1c.0
SysFS BusID: 0000:00:1c.0
Hardware Class: bridge
Model: "Intel 7 Series/C216 Chipset Family PCI Express Root Port 1"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x1e10 "7 Series/C216 Chipset Family PCI Express Root Port 1"
SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
SubDevice: pci 0x0647
Revision: 0xc4
Driver: "pcieport"
IRQ: 17 (97 events)
Module Alias: "pci:v00008086d00001E10sv00001025sd00000647bc06sc04i00"
Driver Info #0:
Driver Status: shpchp is active
Driver Activation Cmd: "modprobe shpchp"
18: PCI 200.2: 0880 System peripheral
SysFS ID: /devices/pci0000:00/0000:00:1c.0/0000:02:00.2
SysFS BusID: 0000:02:00.2
Hardware Class: unknown
Model: "Broadcom BCM57765/57785 MS Card Reader"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x16be "BCM57765/57785 MS Card Reader"
SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
SubDevice: pci 0x0647
Revision: 0x10
Memory Range: 0xb3410000-0xb341ffff (ro,non-prefetchable)
IRQ: 11 (no events)
Module Alias: "pci:v000014E4d000016BEsv00001025sd00000647bc08sc80i00"
Attached to: #17 (PCI bridge)
19: PCI 1f.0: 0601 ISA bridge
SysFS ID: /devices/pci0000:00/0000:00:1f.0
SysFS BusID: 0000:00:1f.0
Hardware Class: bridge
Model: "Intel HM77 Express Chipset LPC Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x1e57 "HM77 Express Chipset LPC Controller"
SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
SubDevice: pci 0x0647
Revision: 0x04
Driver: "lpc_ich"
Driver Modules: "lpc_ich"
Module Alias: "pci:v00008086d00001E57sv00001025sd00000647bc06sc01i00"
Driver Info #0:
Driver Status: lpc_ich is active
Driver Activation Cmd: "modprobe lpc_ich"
20: PCI 01.0: 0604 PCI bridge (Normal decode)
SysFS ID: /devices/pci0000:00/0000:00:01.0
SysFS BusID: 0000:00:01.0
Hardware Class: bridge
Model: "Intel Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x0151 "Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port"
SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
SubDevice: pci 0x0647
Revision: 0x09
Driver: "pcieport"
IRQ: 16 (410 events)
Module Alias: "pci:v00008086d00000151sv00001025sd00000647bc06sc04i00"
Driver Info #0:
Driver Status: shpchp is active
Driver Activation Cmd: "modprobe shpchp"
21: PCI 200.0: 0200 Ethernet controller
SysFS ID: /devices/pci0000:00/0000:00:1c.0/0000:02:00.0
SysFS BusID: 0000:02:00.0
Hardware Class: network
Model: "Broadcom NetLink BCM57785 Gigabit Ethernet PCIe"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x16b5 "NetLink BCM57785 Gigabit Ethernet PCIe"
SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
SubDevice: pci 0x0647
Revision: 0x10
Driver: "tg3"
Driver Modules: "tg3"
Device File: enp2s0f0
Memory Range: 0xb3430000-0xb343ffff (ro,non-prefetchable)
Memory Range: 0xb3440000-0xb344ffff (ro,non-prefetchable)
Memory Range: 0x9fb00000-0x9fb007ff (ro,non-prefetchable,disabled)
IRQ: 16 (410 events)
HW Address: b8:88:e3:08:ff:c1
Permanent HW Address: b8:88:e3:08:ff:c1
Link detected: no
Module Alias: "pci:v000014E4d000016B5sv00001025sd00000647bc02sc00i00"
Driver Info #0:
Driver Status: tg3 is active
Driver Activation Cmd: "modprobe tg3"
Attached to: #17 (PCI bridge)
22: PCI 16.0: 0780 Communication controller
SysFS ID: /devices/pci0000:00/0000:00:16.0
SysFS BusID: 0000:00:16.0
Hardware Class: unknown
Model: "Intel 7 Series/C216 Chipset Family MEI Controller #1"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x1e3a "7 Series/C216 Chipset Family MEI Controller #1"
SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
SubDevice: pci 0x0647
Revision: 0x04
Driver: "mei_me"
Driver Modules: "mei_me"
Memory Range: 0xb3614000-0xb361400f (rw,non-prefetchable)
IRQ: 28 (13 events)
Module Alias: "pci:v00008086d00001E3Asv00001025sd00000647bc07sc80i00"
Driver Info #0:
Driver Status: mei_me is active
Driver Activation Cmd: "modprobe mei_me"
23: PCI 100.0: 0300 VGA compatible controller (VGA)
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: graphics card
Model: "nVidia GK107M [GeForce GT 640M]"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x0fd2 "GK107M [GeForce GT 640M]"
SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
SubDevice: pci 0x0648
Revision: 0xff
Memory Range: 0xb2000000-0xb2ffffff (rw,non-prefetchable)
Memory Range: 0xa0000000-0xafffffff (ro,non-prefetchable)
Memory Range: 0xb0000000-0xb1ffffff (ro,non-prefetchable)
I/O Ports: 0x2000-0x207f (rw)
IRQ: 16 (410 events)
Module Alias: "pci:v000010DEd00000FD2sv00001025sd00000648bc03sc00i00"
Driver Info #0:
Driver Status: nouveau is not active
Driver Activation Cmd: "modprobe nouveau"
Attached to: #20 (PCI bridge)
24: PCI 1b.0: 0403 Audio device
SysFS ID: /devices/pci0000:00/0000:00:1b.0
SysFS BusID: 0000:00:1b.0
Hardware Class: sound
Model: "Intel 7 Series/C216 Chipset Family High Definition Audio Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x1e20 "7 Series/C216 Chipset Family High Definition Audio Controller"
SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
SubDevice: pci 0x0647
Revision: 0x04
Driver: "snd_hda_intel"
Driver Modules: "snd_hda_intel"
Memory Range: 0xb3610000-0xb3613fff (rw,non-prefetchable)
IRQ: 29 (574 events)
Module Alias: "pci:v00008086d00001E20sv00001025sd00000647bc04sc03i00"
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
From ubuntu experience with my laptop, some things may work during live session but they won't after installation, until you fix it 
EDIT: enabled nvidia
I don't see your Nvidia VGA controller, did you left it disabled in BIOS?
Oh, yeah, give me 2 mins, I'll edit post with mhwd output.
OK, Nvidia is also detected along with the rest which means that there is no detection problem.
Can you start Calamares (the Manjaro installer) in debug mode as suggested here?
1 Like
Ok, it's intalling now in debug mode. I'll post results when something will happen.
1 Like
Posting last few lines from console:
tarting job "Set hostname acer-aspire"
15:19:42 [0]: Starting job "displaymanager"
15:19:42 [1]: Job file "/usr/lib/calamares/modules/displaymanager/main.py"
15:19:42 [1]: Job "displaymanager" (doc) -> "Configure display managers."
15:19:42 [1]: [PYTHON JOB]: "slim selected but not installed"
15:19:42 [1]: [PYTHON JOB]: "lightdm selected but not installed"
15:19:42 [1]: [PYTHON JOB]: "gdm selected but not installed"
15:19:42 [1]: [PYTHON JOB]: "mdm selected but not installed"
15:19:42 [1]: [PYTHON JOB]: "lxdm selected but not installed"
15:19:42 [1]: [PYTHON JOB]: "Unsetting autologin."
15:19:42 [0]: Starting job "mhwdcfg"
15:19:42 [1]: Job file "/usr/lib/calamares/modules/mhwdcfg/main.py"
15:19:42 [1]: Job "mhwdcfg" (doc) -> "Configure the hardware"
15:19:42 [0]: Running "chroot" ("/tmp/calamares-root-gg1ln_kj", "mhwd", "-a", "pci", "free", "0200", "--pmconfig", "/opt/pacman-mhwd.conf")
And it's stuck here 
Should I post more?
The problem looks similar to the one I linked. Could you please give the version of Calamares?
Do you have the latest ISO?
Hmm, yeah it looks similar
Manjaro 17.1.2, downloaded it yesterday
Calamares version: 3.1.12-3
You have exactly the same network chip and the same problem than this post.
Could you please try the workaround of removing the 2 lines?
1 Like
Successfully installed and booted
Thank you for guiding me through! 
1 Like
Nice! 
Could you confirm that your network (both WLAN and LAN) works?
Well, kinda
Wired is working just fine, but wireless is having trouble with listing available networks.
WLAN does not sees my 5Ghz network and only sometimes lists my 2.4 GHz network (both coming from the same router which is 5 meters away from me), so I'm using USB dongle for now, which is working correctly with my 2.4 GHz network.
This is a driver issue. mhwd is having problem with the BCM43228 chip, i.e. your WiFi chip.
Could you please check if the package broadcom-wl is installed (source)?
@philm Is it an expected issue from mhwd?
Package? You mean via pacman? ^^" Showing both pacman and grep
[wildcat@acer-aspire ~]$ pacman -Qi broadcom-wl
error: package 'broadcom-wl' was not found
[wildcat@acer-aspire ~]$ lspci | grep Broadcom | grep -v Ethernet
02:00.1 SD Host controller: Broadcom Limited BCM57765/57785 SDXC/MMC Card Reader (rev 10)
02:00.2 System peripheral: Broadcom Limited BCM57765/57785 MS Card Reader (rev 10)
02:00.3 System peripheral: Broadcom Limited BCM57765/57785 xD-Picture Card Reader (rev 10)
03:00.0 Network controller: Broadcom Limited BCM43228 802.11a/b/g/n
If you want to use the tested package, it's broadcom-wl-dkms from the extra repository. You can use pacman or pamac if you want a GUI.
If you wish to access the Arch User Repository (AUR), then use yaourt. AUR is user maintained so be careful.
In your case, I recommend:
sudo pacman -S broadcom-wl-dkms
1 Like
Ran the command -> installed -> reboot -> no wireless at all
Only via dongle
Output:
[wildcat@acer-aspire ~]$ sudo pacman -S broadcom-wl-dkms
[sudo] password for wildcat:
warning: broadcom-wl-dkms-6.30.223.271-4 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
Packages (1) broadcom-wl-dkms-6.30.223.271-4
Total Installed Size: 7.68 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n] y
(1/1) checking keys in keyring [##########################################] 100%
(1/1) checking package integrity [##########################################] 100%
(1/1) loading package files [##########################################] 100%
(1/1) checking for file conflicts [##########################################] 100%
(1/1) checking available disk space [##########################################] 100%
:: Running pre-transaction hooks...
(1/1) Remove DKMS modules
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "",
LC_ALL = (unset),
LC_MEASUREMENT = "lt_LT.UTF-8",
LC_PAPER = "en_US.UTF-8",
LC_MONETARY = "lt_LT.UTF-8",
LC_NAME = "en_US.UTF-8",
LC_ADDRESS = "en_US.UTF-8",
LC_NUMERIC = "en_US.UTF-8",
LC_TELEPHONE = "en_US.UTF-8",
LC_IDENTIFICATION = "en_US.UTF-8",
LC_TIME = "en_GB.UTF-8",
LANG = "en_US.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
==> No kernel 4.14.14-1-MANJARO headers. You must install them to use DKMS!
:: Processing package changes...
(1/1) reinstalling broadcom-wl-dkms [##########################################] 100%
To load the new module, run as root:
rmmod b43 b43legacy ssb bcm43xx brcm80211 brcmfmac brcmsmac bcma wl
modprobe wl
or just reboot the system.
:: Running post-transaction hooks...
(1/2) Install DKMS modules
==> No kernel 4.14.14-1-MANJARO headers. You must install them to use DKMS!
(2/2) Arming ConditionNeedsUpdate...
[wildcat@acer-aspire ~]$ sudo rmmod b43 b43legacy ssb bcm43xx brcm80211 brcmfmac brcmsmac bcma wl
rmmod: ERROR: Module b43 is not currently loaded
rmmod: ERROR: Module b43legacy is not currently loaded
rmmod: ERROR: Module ssb is not currently loaded
rmmod: ERROR: Module bcm43xx is not currently loaded
rmmod: ERROR: Module brcm80211 is not currently loaded
rmmod: ERROR: Module brcmfmac is not currently loaded
rmmod: ERROR: Module brcmsmac is not currently loaded
rmmod: ERROR: Module bcma is not currently loaded
rmmod: ERROR: Module wl is not currently loaded
[wildcat@acer-aspire ~]$ modprobe wl
modprobe: FATAL: Module wl not found in directory /lib/modules/4.14.14-1-MANJARO
From what I see, I just need to update, haven't done it yet
I Need to go now, so I will post results later (~tomorrow, I guess)
Thank you for your help!!
1 Like
Your LOCALES setting is pretty important...
2 Likes
Install linux headers:
sudo pacman -S linux-api-headers