Manjaro doesn't boot after update

I left my computer to update and while it was updating the charger got unplugged so it went into hibernation, now on boot it gives me the module.devname not found error drops into tty where I can't type anything (sh: some error),

After finding some answers I think this can be resolved if I can boot using older kernal from grub but I don't know how to do that, don't really have a live cd or usb that I can use

Try in "Advanced options for Manjaro Linux" and try with another kernel.

Or boot in level 3 , at grub boot menu press e to edit and replace quiet with 3 at kernel line, then press F10 to continue booting.

After you have entered username and password, try the following commands.

sudo pacman-mirrors -f5 && sudo pacman -Syyu

Reboot.

If that's not possible, you'll have to get a live CD or a live stick.
Start a Manjaro-Live Stck or Live-CD and open Terminal.

manjaro-chroot -a

Then you can choose your Manjaro system, it's probably the 0.

pacman-mirrors -f5 && pacman -Syyu

Exit and reboot.

I am really just pressing C after this screen
Imgur
So I pressed E instrad and replaces quite with 3 and pressed F10

This is what I get now
Imgur

Read this Thread.

Also:

Ot looks like these solutions involve a bootable os, as this is my only computer I can't really prepare one and I don't have one prepared beforehand, I'll try tomorrow to make one on my work computer and see how it goes,

Thanks

Ok so I was able to chroot into manjaro and did sudo pacman -Syyuu
The problem unfortunately is still there

can you boot with USB install manjro ( USB boot not the disk )
open a terminal

manjaro-chroot -a ( select 1 if one line )
pacman -Syy ( check ip on ) 
cat /etc/fstab ( check UUID)
grub-mkconfig -o /boot/grub/grub.cfg ( generate grub config )
mkinitcpio -P ( create all img kernel )
update-grub 
exit( always for quit chroot)

So I ran those commands after chroot from a live os and here is the output

[manjaro@manjaro ~]$ manjaro-chroot -a
==> Mounting (ManjaroLinux) [/dev/sda1]
 --> mount: [/mnt]
[manjaro /]# pacman -Syy
:: Synchronizing package databases...
 core                                                                       148.0 KiB   393K/s 00:00 [############################################################] 100%
 extra                                                                     1789.3 KiB  2010K/s 00:01 [############################################################] 100%
 community                                                                    5.3 MiB  3.38M/s 00:02 [############################################################] 100%
 multilib                                                                   182.5 KiB   576K/s 00:00 [############################################################] 100%
[manjaro /]# cat /etc/fstab 
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
# <file system>             <mount point>  <type>  <options>  <dump>  <pass>
UUID=11461a6f-e311-4fab-8986-e42fd57b784a /              ext4    defaults,noatime 0 1
UUID=308f6867-2e74-4629-bab6-418143a88589 swap           swap    defaults,noatime 0 2
[manjaro /]# grub-mkconfig -o /boot/grub/grub.cfg
Generating grub configuration file ...
Found theme: /usr/share/grub/themes/manjaro/theme.txt
Found linux image: /boot/vmlinuz-4.19-x86_64
Found initrd image: /boot/intel-ucode.img /boot/initramfs-4.19-x86_64.img
Found initrd fallback image: /boot/initramfs-4.19-x86_64-fallback.img
grub-probe: error: cannot find a GRUB drive for /dev/sdb1.  Check your device.map.
grub-probe: error: cannot find a GRUB drive for /dev/sdb1.  Check your device.map.
Found memtest86+ image: /boot/memtest86+/memtest.bin
done
[manjaro /]# mkinitcpio -P
==> Building image from preset: /etc/mkinitcpio.d/linux419.preset: 'default'
  -> -k /boot/vmlinuz-4.19-x86_64 -c /etc/mkinitcpio.conf -g /boot/initramfs-4.19-x86_64.img
==> Starting build: 4.19.62-1-MANJARO
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [autodetect]
  -> Running build hook: [modconf]
  -> Running build hook: [block]
  -> Running build hook: [keyboard]
  -> Running build hook: [keymap]
  -> Running build hook: [resume]
  -> Running build hook: [filesystems]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-4.19-x86_64.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux419.preset: 'fallback'
  -> -k /boot/vmlinuz-4.19-x86_64 -c /etc/mkinitcpio.conf -g /boot/initramfs-4.19-x86_64-fallback.img -S autodetect
==> Starting build: 4.19.62-1-MANJARO
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [modconf]
  -> Running build hook: [block]
  -> Running build hook: [keyboard]
  -> Running build hook: [keymap]
  -> Running build hook: [resume]
  -> Running build hook: [filesystems]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-4.19-x86_64-fallback.img
==> Image generation successful
[manjaro /]# update-grub
Generating grub configuration file ...
Found theme: /usr/share/grub/themes/manjaro/theme.txt
Found linux image: /boot/vmlinuz-4.19-x86_64
Found initrd image: /boot/intel-ucode.img /boot/initramfs-4.19-x86_64.img
Found initrd fallback image: /boot/initramfs-4.19-x86_64-fallback.img
grub-probe: error: cannot find a GRUB drive for /dev/sdb1.  Check your device.map.
grub-probe: error: cannot find a GRUB drive for /dev/sdb1.  Check your device.map.
Found memtest86+ image: /boot/memtest86+/memtest.bin
done
[manjaro /]# 

Okay, it works now, thanks very much guys, for all the help, install saved:)

you should add other kernels

sudo mhwd-kernel -i linux414
sudo mhwd-kernel -i linux52

press Esc on (re)Boot and select in detail kernel version

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.

Forum kindly sponsored by