Manjaro (Gnome) 18.0 - random boot problems (Dell Inspiron 15-5559 and Crucial MX500 SSD)

[deesnook]

Hi everybody,

I replaced my standard HDD with a Crucial MX500 1GB SSD. Installation of Manjaro Gnome 18.0 (GPT/UEFI) worked without any problem. The system boots fine.

However, after the first bootup there are problems with further bootups. Sometimes there's just a black screen, sometimes a black screen with a blinking cursor, sometimes bootup halts after the following line:

[OK] started TLP system startup/shutdown

It looks to me like the last step before loading the login screen is missing resp. isn't executed. It may be noteworthy that the GRUB menu only shows randomly, too. Most of the times it doesn't (even though I've edited the GRUB menu and removed the quiet splash screen startup). After installation, the GRUB version was 2.03.1-1; after running the usual system updates it is 2.03.2-1. With both versions the bootup process doesn't work consistently.

I checked if there might be a SSD hardware failure. However, a full test with GSmartcontrol hasn't produced any errors. To double check I installed Ubuntu 18.04, which worked smoothly and without any problems. I also tried to install Manjaro using MBR and legacy boot, but that didn't work either - I'm not sure if Calamares has a bug there since it doesn't offer to choose the drive to install the bootloader (which supposedly it does according to the Manjaro installation guide). Also even though I had chosen MBR as a partition table, before the installation summary there was a warning prompt telling me I'd need a /boot/efi partition (which isn't needed for legacy/BIOS boot if I'm not mistaken). In any case the system couldn't boot at all because there was no bootable volume.

I've seen a couple of similar posts, but none would really match my problem.

Any ideas? Thank you in advance!

EDIT: Good instructions how to install Gnome after installing Manjaro Xfce: https://linuxconfig.org/how-to-install-gnome-desktop-on-manjaro-18-linux

[dglt]

you need to provide more info

How to provide good information in your posts

When asking questions in the forum, it would be most helpful to all members if you provide some basic information. When you provide info from the terminal, usually from your logs, you have to format it so the content is easy to read. First copy and paste your text/terminal/code into the post Then select the text/code and click the post edit toolbar button </> . Another handy way is to use 3 backticks ` at the start and 3 more at the end of the text like this: ``` Paste text or code here …

[AgentS]

Most probably you have been mixing boot modes during either installations. On UEFI setup you select bootloader place with /boot/efi mount. No sense of target of bootloader then.
On MSDOS/MBR you select target for bootloader, so the question for /boot/efi shows you booted in UEFI. Then you "think" you are on MSDOS but probably wrong.

[deesnook]

No, I didn't mix up anything. I clearly have a UEFI setup using gpt and a FAT32-boot/efi-partition.

I tried to do an installation using an MSDOS/MBR partition table, but it didn't work at all. Calamares didn't let me choose a target for the bootloader installation (the option was simply missing), and before the summary that is displayed immediately before you start installing, a warning prompt told me I needed a boot/efi-partition. Which is, if I understand correctly, only needed for a GPT/UEFI setup, isn't it? So it's kind of weird if you ask me.

Also the boot process does work from time to time. It's just completely random

[SlayerProof32]

Please provide the info provided by @dglt. If you do, we will be able to tell what maybe wrong.

[stephane]

@deesnook

Calamares didn’t let me choose a target for the bootloader installation

the manjaro iso has 2 partitions
1 for boot Bios , 2nd for boot EFI ( you see a number part in this case )

you have to check version Bios and option Bios , calamares OFFERS ONLY FROM BOOT LAUNCH
( Bios or EFI )

[gohlip]

@deesnook, if you are installed/booted in uefi/gpt (and I think you are), let's just make you are in the first place.
When you're booted (when lucky), at terminal,

sudo parted -l
findmnt -s
efibootmgr

And after affirming you are in uefi/gpt, let's fix the grub thingy. I understand you have gone through the several iterations made with grub and now you are in v 2.03.2-1. That's good.
But we need to fix it and a grub-install is still necessary (undo the systemd-fsck if it was done too).
You can proceed with below if you are very sure you have uefi/gpt and all is in place. You can wait to confirm gpt/uefi is in place before proceeding if you like.

If gpt/uefi and fstab all correct, do the following..(refer step 7 here)

In /etc/default/grub, make sure you have one of the following specified.
GRUB_TIMEOUT_STYLE=menu
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT_STYLE=countdown

Also in /etc/default/grub, make sure you have
GRUB_TIMEOUT=5 (or more; suggest 10, change to 5 later on when you feel more confident)



    At terminal,

sudo rm /boot/grub/grubenv
sudo grub-editenv /boot/grub/grubenv create
sudo grub-editenv - set boot_success=0
sudo grub-install 
sudo update-grub

More explanation ..
You need GRUB_TIMEOUT_STYLE= because 00_header has
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=${style}
set timeout=${timeout}
and 01_menu_auto_hide has similar "if [ x$feature_timeout_style = xy ] ; then" as well.

By specifying it (and with boot_success) in /etc/default/grub, it's the same effect as a 'stock' grub and avoids the needless complications of the fedora-grub.

And don't forget to do a 'grub-install'.

[AgentS]

@deesnook

I tried to do an installation using an MSDOS/MBR partition table, but it didn’t work at all. Calamares didn’t let me choose a target for the bootloader installation (the option was simply missing), and before the summary that is displayed immediately before you start installing, a warning prompt told me I needed a boot/efi-partition

You just said it yourself. As I said(or I thought so) , you can't install a UEFI system on MBR disk. Even if you boot in UEFI mode. This is a restriction for UEFI! ! Not the installer 's..

@deesnook

it’s kind of weird if you ask me

It's how it works, it is normal.

In order to install an MSDOS /MBR system you need to boot in MSDOS. That's why Manjaro media are called hybrid. They can be used for both, but you NEED to boot to the proper mode. Or repartition your disk to GPT.
Please, have some time reading about UEFI, just to make sure we are not advising wrong.

[deesnook]

Here's some more info:

inxi -Fxxxz has the following output:

System:
  Host: johndoe Kernel: 4.19.2-1-MANJARO x86_64 bits: 64 compiler: gcc 
  v: 8.2.1 Desktop: Gnome 3.30.1 wm: gnome-shell dm: GDM 3.30.2 
  Distro: Manjaro Linux 
Machine:
  Type: Laptop System: Dell product: Inspiron 5559 v: N/A serial: <filter> 
  Chassis: type: 10 serial: <filter> 
  Mobo: Dell model: 0K64R6 v: A00 serial: <filter> UEFI: Dell v: 1.4.1 
  date: 12/08/2017 
Battery:
  ID-1: BAT0 charge: 17.4 Wh condition: 17.4/41.4 Wh (42%) volts: 17.0/14.8 
  model: SMP DELL VN3N047 type: Li-ion serial: <filter> status: Full 
CPU:
  Topology: Dual Core model: Intel Core i7-6500U bits: 64 type: MT MCP 
  arch: Skylake rev: 3 L2 cache: 4096 KiB 
  flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 20744 
  Speed: 3000 MHz min/max: 400/3100 MHz Core speeds (MHz): 1: 3001 2: 3075 
  3: 2999 4: 3099 
Graphics:
  Device-1: Intel Skylake GT2 [HD Graphics 520] vendor: Dell driver: i915 
  v: kernel bus ID: 00:02.0 chip ID: 8086:1916 
  Device-2: AMD Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430 / R7 
  M520] 
  vendor: Dell driver: radeon v: kernel bus ID: 01:00.0 chip ID: 1002:6660 
  Display: x11 server: X.Org 1.20.3 driver: radeon compositor: gnome-shell 
  resolution: 1920x1080~60Hz 
  OpenGL: renderer: Mesa DRI Intel HD Graphics 520 (Skylake GT2) 
  v: 4.5 Mesa 18.2.5 compat-v: 3.0 direct render: Yes 
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio vendor: Dell 
  driver: snd_hda_intel v: kernel bus ID: 00:1f.3 chip ID: 8086:9d70 
  Sound Server: ALSA v: k4.19.2-1-MANJARO 
Network:
  Device-1: Intel Wireless 3160 driver: iwlwifi v: kernel port: e000 
  bus ID: 02:00.0 chip ID: 8086:08b3 
  IF: wlp2s0 state: up mac: <filter> 
  Device-2: Realtek RTL810xE PCI Express Fast Ethernet vendor: Dell 
  driver: r8169 v: kernel port: d000 bus ID: 03:00.0 chip ID: 10ec:8136 
  IF: enp3s0 state: down mac: <filter> 
Drives:
  Local Storage: total: 931.51 GiB used: 49.74 GiB (5.3%) 
  ID-1: /dev/sda vendor: Crucial model: CT1000MX500SSD1 size: 931.51 GiB 
  speed: 6.0 Gb/s serial: <filter> rev: 022 scheme: GPT 
Partition:
  ID-1: / size: 95.62 GiB used: 6.97 GiB (7.3%) fs: ext4 dev: /dev/sda2 
  ID-2: /home size: 819.48 GiB used: 42.77 GiB (5.2%) fs: ext4 
  dev: /dev/sda1 
Sensors:
  System Temperatures: cpu: 61.0 C mobo: 40.0 C sodimm: 31.0 C gpu: radeon 
  temp: 44 C 
  Fan Speeds (RPM): cpu: 2271 
Info:
  Processes: 230 Uptime: 4m Memory: 15.56 GiB used: 1.43 GiB (9.2%) 
  Init: systemd v: 239 Compilers: gcc: 8.2.1 Shell: bash v: 4.4.23 
  running in: gnome-terminal inxi: 3.0.27 

dmesg has the following output:

[    0.000000] microcode: microcode updated early to revision 0xc6, date = 2018-04-17
[    0.000000] Linux version 4.19.2-1-MANJARO (builduser@development) (gcc version 8.2.1 20180831 (GCC)) #1 SMP PREEMPT Tue Nov 13 22:35:25 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19-x86_64 root=UUID=1dd2f4c0-4ad5-4891-be00-23480ab3a05b rw
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006a3bcfff] usable
[    0.000000] BIOS-e820: [mem 0x000000006a3bd000-0x000000006a3bdfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000006a3be000-0x000000006a3e7fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006a3e8000-0x000000006a449fff] usable
[    0.000000] BIOS-e820: [mem 0x000000006a44a000-0x000000006abf9fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006abfa000-0x0000000076c10fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000076c11000-0x0000000076c7cfff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000076c7d000-0x0000000077628fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000077629000-0x0000000077f98fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000077f99000-0x0000000077ffdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000077ffe000-0x0000000077ffefff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000780fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000482ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi:  ACPI=0x77fd4000  ACPI 2.0=0x77fd4000  SMBIOS=0xf05e0  ESRT=0x76fe8598  MPS=0xfcbe0 
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Dell Inc. Inspiron 5559/0K64R6, BIOS 1.4.1 12/08/2017
[    0.000000] tsc: Detected 2600.000 MHz processor
[    0.001676] tsc: Detected 2592.000 MHz TSC
[    0.001676] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001678] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001685] last_pfn = 0x483000 max_arch_pfn = 0x400000000
[    0.001687] MTRR default type: write-back
[    0.001688] MTRR fixed ranges enabled:
[    0.001689]   00000-9FFFF write-back
[    0.001690]   A0000-BFFFF uncachable
[    0.001691]   C0000-FFFFF write-protect
[    0.001691] MTRR variable ranges enabled:
[    0.001692]   0 base 0080000000 mask 7F80000000 uncachable
[    0.001693]   1 base 007C000000 mask 7FFC000000 uncachable
[    0.001694]   2 base 007A000000 mask 7FFE000000 uncachable
[    0.001694]   3 base 0079800000 mask 7FFF800000 uncachable
[    0.001695]   4 disabled
[    0.001695]   5 disabled
[    0.001696]   6 disabled
[    0.001696]   7 disabled
[    0.001696]   8 disabled
[    0.001697]   9 disabled
[    0.002660] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002899] last_pfn = 0x77fff max_arch_pfn = 0x400000000
[    0.009228] found SMP MP-table at [mem 0x000fce10-0x000fce1f] mapped at [(____ptrval____)]
[    0.009241] esrt: Reserving ESRT space from 0x0000000076fe8598 to 0x0000000076fe85d0.
[    0.009248] Scanning 1 areas for low memory corruption
[    0.009249] Base memory trampoline at [(____ptrval____)] 96000 size 24576
[    0.009252] Using GB pages for direct mapping
[    0.009253] BRK [0x11bc01000, 0x11bc01fff] PGTABLE
[    0.009255] BRK [0x11bc02000, 0x11bc02fff] PGTABLE
[    0.009255] BRK [0x11bc03000, 0x11bc03fff] PGTABLE
[    0.009285] BRK [0x11bc04000, 0x11bc04fff] PGTABLE
[    0.009287] BRK [0x11bc05000, 0x11bc05fff] PGTABLE
[    0.009428] BRK [0x11bc06000, 0x11bc06fff] PGTABLE
[    0.009460] BRK [0x11bc07000, 0x11bc07fff] PGTABLE
[    0.009489] BRK [0x11bc08000, 0x11bc08fff] PGTABLE
[    0.009533] BRK [0x11bc09000, 0x11bc09fff] PGTABLE
[    0.009582] BRK [0x11bc0a000, 0x11bc0afff] PGTABLE
[    0.009630] BRK [0x11bc0b000, 0x11bc0bfff] PGTABLE
[    0.009672] Secure boot could not be determined
[    0.009673] RAMDISK: [mem 0x36d5d000-0x376a5fff]
[    0.009678] ACPI: Early table checksum verification disabled
[    0.009680] ACPI: RSDP 0x0000000077FD4000 000024 (v02 DELL  )
[    0.009683] ACPI: XSDT 0x0000000077FD40B8 0000F4 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.009688] ACPI: FACP 0x0000000077FF1C90 00010C (v05 DELL   CBX3     01072009 AMI  00010013)
[    0.009692] ACPI: DSDT 0x0000000077FD4240 01DA4C (v02 DELL   CBX3     01072009 INTL 20120913)
[    0.009694] ACPI: FACS 0x0000000077F97F80 000040
[    0.009696] ACPI: APIC 0x0000000077FF1DA0 000084 (v03 DELL   CBX3     01072009 AMI  00010013)
[    0.009699] ACPI: FPDT 0x0000000077FF1E28 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.009701] ACPI: FIDT 0x0000000077FF1E70 00009C (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.009703] ACPI: MCFG 0x0000000077FF1F10 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
[    0.009705] ACPI: HPET 0x0000000077FF1F50 000038 (v01 DELL   CBX3     01072009 AMI. 0005000B)
[    0.009707] ACPI: SSDT 0x0000000077FF1F88 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[    0.009710] ACPI: LPIT 0x0000000077FF22A0 000094 (v01 INTEL  SKL-ULT  00000000 MSFT 0000005F)
[    0.009712] ACPI: SSDT 0x0000000077FF2338 000248 (v02 INTEL  sensrhub 00000000 INTL 20120913)
[    0.009714] ACPI: SSDT 0x0000000077FF2580 002BAE (v02 INTEL  PtidDevc 00001000 INTL 20120913)
[    0.009717] ACPI: SSDT 0x0000000077FF5130 000C45 (v02 INTEL  Ther_Rvp 00001000 INTL 20120913)
[    0.009719] ACPI: DBGP 0x0000000077FF5D78 000034 (v01 INTEL           00000000 MSFT 0000005F)
[    0.009721] ACPI: DBG2 0x0000000077FF5DB0 000054 (v00 INTEL           00000000 MSFT 0000005F)
[    0.009723] ACPI: SSDT 0x0000000077FF5E08 000740 (v02 INTEL  xh_rvp07 00000000 INTL 20120913)
[    0.009726] ACPI: BOOT 0x0000000077FF6548 000028 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.009728] ACPI: SSDT 0x0000000077FF6570 003531 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.009730] ACPI: UEFI 0x0000000077FF9AA8 000042 (v01                 00000000      00000000)
[    0.009733] ACPI: SSDT 0x0000000077FF9AF0 000E58 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.009735] ACPI: MSDM 0x0000000077FFA948 000055 (v03 DELL   CBX3     06222004 AMI  00010013)
[    0.009737] ACPI: SLIC 0x0000000077FFA9A0 000176 (v03 DELL   CBX3     01072009 MSFT 00010013)
[    0.009739] ACPI: BGRT 0x0000000077FFAB18 000038 (v00 \xf3\xee              01072009 AMI  00010013)
[    0.009742] ACPI: SSDT 0x0000000077FFAB50 000527 (v02 SgRef  SgPch    00001000 INTL 20120913)
[    0.009744] ACPI: DMAR 0x0000000077FFB078 0000F0 (v01 INTEL  SKL      00000001 INTL 00000001)
[    0.009746] ACPI: TPM2 0x0000000077FFB168 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
[    0.009749] ACPI: SSDT 0x0000000077FFB1A0 000DC8 (v01 AmdRef AmdTabl  00001000 INTL 20120913)
[    0.009751] ACPI: ASF! 0x0000000077FFBF68 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.009758] ACPI: Local APIC address 0xfee00000
[    0.009918] No NUMA configuration found
[    0.009919] Faking a node at [mem 0x0000000000000000-0x0000000482ffffff]
[    0.009922] NODE_DATA(0) allocated [mem 0x482ffc000-0x482ffffff]
[    0.009941] Zone ranges:
[    0.009942]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.009943]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.009944]   Normal   [mem 0x0000000100000000-0x0000000482ffffff]
[    0.009945]   Device   empty
[    0.009946] Movable zone start for each node
[    0.009946] Early memory node ranges
[    0.009947]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.009947]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.009948]   node   0: [mem 0x0000000000100000-0x000000006a3bcfff]
[    0.009948]   node   0: [mem 0x000000006a3e8000-0x000000006a449fff]
[    0.009949]   node   0: [mem 0x000000006abfa000-0x0000000076c10fff]
[    0.009949]   node   0: [mem 0x0000000077ffe000-0x0000000077ffefff]
[    0.009950]   node   0: [mem 0x0000000100000000-0x0000000482ffffff]
[    0.010037] Reserved but unavailable: 7212 pages
[    0.010038] Initmem setup node 0 [mem 0x0000000000001000-0x0000000482ffffff]
[    0.010039] On node 0 totalpages: 4166612
[    0.010040]   DMA zone: 64 pages used for memmap
[    0.010041]   DMA zone: 26 pages reserved
[    0.010041]   DMA zone: 3997 pages, LIFO batch:0
[    0.010108]   DMA32 zone: 7505 pages used for memmap
[    0.010109]   DMA32 zone: 480311 pages, LIFO batch:63
[    0.019002]   Normal zone: 57536 pages used for memmap
[    0.019002]   Normal zone: 3682304 pages, LIFO batch:63
[    0.078352] Reserving Intel graphics memory at [mem 0x7a000000-0x7bffffff]
[    0.078598] ACPI: PM-Timer IO Port: 0x1808
[    0.078600] ACPI: Local APIC address 0xfee00000
[    0.078604] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.078605] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.078605] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.078606] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.078632] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.078634] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.078635] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.078636] ACPI: IRQ0 used by override.
[    0.078636] ACPI: IRQ9 used by override.
[    0.078638] Using ACPI (MADT) for SMP configuration information
[    0.078639] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.078645] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.078659] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.078660] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.078661] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.078662] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.078663] PM: Registered nosave memory: [mem 0x6a3bd000-0x6a3bdfff]
[    0.078663] PM: Registered nosave memory: [mem 0x6a3be000-0x6a3e7fff]
[    0.078664] PM: Registered nosave memory: [mem 0x6a44a000-0x6abf9fff]
[    0.078665] PM: Registered nosave memory: [mem 0x76c11000-0x76c7cfff]
[    0.078666] PM: Registered nosave memory: [mem 0x76c7d000-0x77628fff]
[    0.078666] PM: Registered nosave memory: [mem 0x77629000-0x77f98fff]
[    0.078667] PM: Registered nosave memory: [mem 0x77f99000-0x77ffdfff]
[    0.078668] PM: Registered nosave memory: [mem 0x77fff000-0x77ffffff]
[    0.078668] PM: Registered nosave memory: [mem 0x78000000-0x780fffff]
[    0.078668] PM: Registered nosave memory: [mem 0x78100000-0x79ffffff]
[    0.078669] PM: Registered nosave memory: [mem 0x7a000000-0x7bffffff]
[    0.078669] PM: Registered nosave memory: [mem 0x7c000000-0xdfffffff]
[    0.078670] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.078670] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.078671] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.078671] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.078672] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.078672] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.078672] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.078673] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.078673] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.078675] [mem 0x7c000000-0xdfffffff] available for PCI devices
[    0.078676] Booting paravirtualized kernel on bare hardware
[    0.078677] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.163599] random: get_random_bytes called from start_kernel+0x95/0x53f with crng_init=0
[    0.163604] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.163731] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288
[    0.163736] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.163737] pcpu-alloc: [0] 0 1 2 3 
[    0.163752] Built 1 zonelists, mobility grouping on.  Total pages: 4101481
[    0.163753] Policy zone: Normal
[    0.163754] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19-x86_64 root=UUID=1dd2f4c0-4ad5-4891-be00-23480ab3a05b rw
[    0.166651] Calgary: detecting Calgary via BIOS EBDA area
[    0.166652] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.198570] Memory: 16072068K/16666448K available (12300K kernel code, 1383K rwdata, 3688K rodata, 1536K init, 3804K bss, 594380K reserved, 0K cma-reserved)
[    0.198645] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.198649] Kernel/User page tables isolation: enabled
[    0.205029] ftrace: allocating 36074 entries in 141 pages
[    0.216457] rcu: Preemptible hierarchical RCU implementation.
[    0.216458] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.216458] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.216459] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.216459] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.216460] 	Tasks RCU enabled.
[    0.216461] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.217800] NR_IRQS: 20736, nr_irqs: 1024, preallocated irqs: 16
[    0.217991] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.218102] Console: colour dummy device 80x25
[    0.218106] console [tty0] enabled
[    0.218117] ACPI: Core revision 20180810
[    0.218400] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.218430] hpet clockevent registered
[    0.218483] APIC: Switch to symmetric I/O mode setup
[    0.218484] DMAR: Host address width 39
[    0.218485] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.218489] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[    0.218490] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.218493] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.218494] DMAR: RMRR base: 0x0000007758b000 end: 0x000000775aafff
[    0.218494] DMAR: RMRR base: 0x00000079800000 end: 0x0000007bffffff
[    0.218498] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.218499] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.218500] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.218501] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.218501] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.218502] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.220006] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.220007] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.223916] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.238439] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x255cb6cc5db, max_idle_ns: 440795203504 ns
[    0.238449] Calibrating delay loop (skipped), value calculated using timer frequency.. 5186.00 BogoMIPS (lpj=8640000)
[    0.238450] pid_max: default: 32768 minimum: 301
[    0.239271] Security Framework initialized
[    0.239272] Yama: becoming mindful.
[    0.239276] AppArmor: AppArmor disabled by boot time parameter
[    0.240865] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.241661] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.241692] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.241718] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.241877] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.241877] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.241882] mce: CPU supports 8 MCE banks
[    0.241888] CPU0: Thermal monitoring enabled (TM1)
[    0.241899] process: using mwait in idle threads
[    0.241901] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.241902] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.241903] Spectre V2 : Mitigation: Full generic retpoline
[    0.241903] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.241904] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.241904] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.241905] Spectre V2 : Spectre v2 cross-process SMT mitigation: Enabling STIBP
[    0.241906] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.245077] Freeing SMP alternatives memory: 28K
[    0.252072] TSC deadline timer enabled
[    0.252076] smpboot: CPU0: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz (family: 0x6, model: 0x4e, stepping: 0x3)
[    0.271811] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.271836] ... version:                4
[    0.271837] ... bit width:              48
[    0.271837] ... generic registers:      4
[    0.271838] ... value mask:             0000ffffffffffff
[    0.271838] ... max period:             00007fffffffffff
[    0.271839] ... fixed-purpose events:   3
[    0.271839] ... event mask:             000000070000000f
[    0.278457] rcu: Hierarchical SRCU implementation.
[    0.301881] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.308481] smp: Bringing up secondary CPUs ...
[    0.348482] x86: Booting SMP configuration:
[    0.348483] .... node  #0, CPUs:      #1 #2 #3
[    0.428867] smp: Brought up 1 node, 4 CPUs
[    0.428867] smpboot: Max logical packages: 1
[    0.428867] smpboot: Total of 4 processors activated (20744.00 BogoMIPS)
[    0.432117] devtmpfs: initialized
[    0.432117] x86/mm: Memory block size: 128MB
[    0.432863] PM: Registering ACPI NVS region [mem 0x6a3bd000-0x6a3bdfff] (4096 bytes)
[    0.432863] PM: Registering ACPI NVS region [mem 0x77629000-0x77f98fff] (9895936 bytes)
[    0.432863] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.432863] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.432863] pinctrl core: initialized pinctrl subsystem
[    0.432863] RTC time: 11:33:43, date: 11/18/18
[    0.432863] NET: Registered protocol family 16
[    0.432863] audit: initializing netlink subsys (disabled)
[    0.432863] audit: type=2000 audit(1542540823.216:1): state=initialized audit_enabled=0 res=1
[    0.432863] cpuidle: using governor ladder
[    0.432863] cpuidle: using governor menu
[    0.432863] Simple Boot Flag at 0x47 set to 0x80
[    0.432863] KVM setup pv remote TLB flush
[    0.432863] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.432863] ACPI: bus type PCI registered
[    0.432863] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.432863] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.432863] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.432863] PCI: Using configuration type 1 for base access
[    0.435524] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.435524] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.435524] ACPI: Added _OSI(Module Device)
[    0.435524] ACPI: Added _OSI(Processor Device)
[    0.435524] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.435524] ACPI: Added _OSI(Processor Aggregator Device)
[    0.435524] ACPI: Added _OSI(Linux-Dell-Video)
[    0.435524] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.468597] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.475059] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.484225] ACPI: Dynamic OEM Table Load:
[    0.484231] ACPI: SSDT 0xFFFF91237067D800 000660 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.484731] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.486094] ACPI: Dynamic OEM Table Load:
[    0.486098] ACPI: SSDT 0xFFFF9123701D4000 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.487201] ACPI: Dynamic OEM Table Load:
[    0.487206] ACPI: SSDT 0xFFFF91237067B800 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.487937] ACPI: Dynamic OEM Table Load:
[    0.487941] ACPI: SSDT 0xFFFF91237021EA00 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.490146] ACPI: EC: EC started
[    0.490147] ACPI: EC: interrupt blocked
[    0.492382] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[    0.492384] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x45, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.492386] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
[    0.492386] ACPI: Interpreter enabled
[    0.492422] ACPI: (supports S0 S3 S4 S5)
[    0.492423] ACPI: Using IOAPIC for interrupt routing
[    0.492459] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.493099] ACPI: Enabled 8 GPEs in block 00 to 7F
[    0.494791] ACPI: Power Resource [PG00] (on)
[    0.495153] ACPI: Power Resource [PG01] (on)
[    0.495493] ACPI: Power Resource [PG02] (on)
[    0.496908] ACPI: Power Resource [WRST] (off)
[    0.497253] ACPI: Power Resource [WRST] (off)
[    0.497600] ACPI: Power Resource [WRST] (off)
[    0.497949] ACPI: Power Resource [WRST] (off)
[    0.498300] ACPI: Power Resource [WRST] (off)
[    0.498349] ACPI: Power Resource [PC09] (on)
[    0.499422] ACPI: Power Resource [WRST] (off)
[    0.499766] ACPI: Power Resource [WRST] (off)
[    0.500116] ACPI: Power Resource [WRST] (off)
[    0.500763] ACPI: Power Resource [WRST] (off)
[    0.501120] ACPI: Power Resource [WRST] (off)
[    0.501467] ACPI: Power Resource [WRST] (off)
[    0.501829] ACPI: Power Resource [WRST] (off)
[    0.502187] ACPI: Power Resource [WRST] (off)
[    0.502530] ACPI: Power Resource [WRST] (off)
[    0.502882] ACPI: Power Resource [WRST] (off)
[    0.503236] ACPI: Power Resource [WRST] (off)
[    0.503589] ACPI: Power Resource [WRST] (off)
[    0.503938] ACPI: Power Resource [WRST] (off)
[    0.504282] ACPI: Power Resource [WRST] (off)
[    0.516499] ACPI: Power Resource [FN00] (off)
[    0.516568] ACPI: Power Resource [FN01] (off)
[    0.516637] ACPI: Power Resource [FN02] (off)
[    0.516707] ACPI: Power Resource [FN03] (off)
[    0.516773] ACPI: Power Resource [FN04] (off)
[    0.518035] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.518041] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.518080] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.518867] PCI host bridge to bus 0000:00
[    0.518869] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.518871] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.518872] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.518873] pci_bus 0000:00: root bus resource [mem 0x7c000000-0xdfffffff window]
[    0.518874] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.518875] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.518882] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[    0.519005] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[    0.519014] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
[    0.519019] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.519022] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.519035] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.519213] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.519235] pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit]
[    0.519303] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.519442] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.519463] pci 0000:00:14.2: reg 0x10: [mem 0xdf330000-0xdf330fff 64bit]
[    0.519718] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[    0.519982] pci 0000:00:15.0: reg 0x10: [mem 0xdf32f000-0xdf32ffff 64bit]
[    0.521016] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[    0.521279] pci 0000:00:15.1: reg 0x10: [mem 0xdf32e000-0xdf32efff 64bit]
[    0.522245] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.522272] pci 0000:00:16.0: reg 0x10: [mem 0xdf32d000-0xdf32dfff 64bit]
[    0.522347] pci 0000:00:16.0: PME# supported from D3hot
[    0.522499] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.522517] pci 0000:00:17.0: reg 0x10: [mem 0xdf328000-0xdf329fff]
[    0.522525] pci 0000:00:17.0: reg 0x14: [mem 0xdf32c000-0xdf32c0ff]
[    0.522533] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.522540] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.522547] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.522555] pci 0000:00:17.0: reg 0x24: [mem 0xdf32b000-0xdf32b7ff]
[    0.522597] pci 0000:00:17.0: PME# supported from D3hot
[    0.522746] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.522816] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.523000] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[    0.523070] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.523242] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[    0.523312] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.523497] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[    0.523736] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.523750] pci 0000:00:1f.2: reg 0x10: [mem 0xdf324000-0xdf327fff]
[    0.523917] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
[    0.523942] pci 0000:00:1f.3: reg 0x10: [mem 0xdf320000-0xdf323fff 64bit]
[    0.523968] pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit]
[    0.524016] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.524214] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.524274] pci 0000:00:1f.4: reg 0x10: [mem 0xdf32a000-0xdf32a0ff 64bit]
[    0.524343] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.524594] pci 0000:01:00.0: [1002:6660] type 00 class 0x038000
[    0.524618] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.524630] pci 0000:01:00.0: reg 0x18: [mem 0xdf200000-0xdf23ffff 64bit]
[    0.524637] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.524652] pci 0000:01:00.0: reg 0x30: [mem 0xdf240000-0xdf25ffff pref]
[    0.524659] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 256)
[    0.524661] pci 0000:01:00.0: enabling Extended Tags
[    0.524713] pci 0000:01:00.0: supports D1 D2
[    0.524714] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    0.524744] pci 0000:01:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8 GT/s x4 link at 0000:00:1c.0 (capable of 63.008 Gb/s with 8 GT/s x8 link)
[    0.524795] pci 0000:00:1c.0: ASPM: current common clock configuration is broken, reconfiguring
[    0.531791] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.531794] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.531796] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf2fffff]
[    0.531800] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.532032] pci 0000:02:00.0: [8086:08b3] type 00 class 0x028000
[    0.532133] pci 0000:02:00.0: reg 0x10: [mem 0xdf100000-0xdf101fff 64bit]
[    0.532348] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.532421] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:1c.4 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[    0.532783] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.532787] pci 0000:00:1c.4:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.532880] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.532918] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.532948] pci 0000:03:00.0: reg 0x18: [mem 0xdf000000-0xdf000fff 64bit]
[    0.532965] pci 0000:03:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    0.533072] pci 0000:03:00.0: supports D1 D2
[    0.533073] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.533270] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.533273] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.533275] pci 0000:00:1c.5:   bridge window [mem 0xdf000000-0xdf0fffff]
[    0.533279] pci 0000:00:1c.5:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.535366] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.535425] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.535483] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.535539] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.535596] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.535652] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.535709] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.535765] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.537678] ACPI: EC: interrupt unblocked
[    0.537838] ACPI: EC: event unblocked
[    0.537861] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x45, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.537863] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
[    0.538722] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.538722] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.538722] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.538722] vgaarb: loaded
[    0.538722] ACPI: bus type USB registered
[    0.538722] usbcore: registered new interface driver usbfs
[    0.538722] usbcore: registered new interface driver hub
[    0.538723] usbcore: registered new device driver usb
[    0.538723] pps_core: LinuxPPS API ver. 1 registered
[    0.538723] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.538723] PTP clock support registered
[    0.538723] EDAC MC: Ver: 3.0.0
[    0.539068] Registered efivars operations
[    0.545194] PCI: Using ACPI for IRQ routing
[    0.571315] PCI: pci_cache_line_size set to 64 bytes
[    0.571700] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.571701] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.571702] e820: reserve RAM buffer [mem 0x6a3bd000-0x6bffffff]
[    0.571702] e820: reserve RAM buffer [mem 0x6a44a000-0x6bffffff]
[    0.571703] e820: reserve RAM buffer [mem 0x76c11000-0x77ffffff]
[    0.571704] e820: reserve RAM buffer [mem 0x77fff000-0x77ffffff]
[    0.571705] e820: reserve RAM buffer [mem 0x483000000-0x483ffffff]
[    0.571777] NetLabel: Initializing
[    0.571778] NetLabel:  domain hash size = 128
[    0.571778] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.571792] NetLabel:  unlabeled traffic allowed by default
[    0.575475] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.575480] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.577518] clocksource: Switched to clocksource tsc-early
[    0.584075] VFS: Disk quotas dquot_6.6.0
[    0.584087] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.584140] pnp: PnP ACPI init
[    0.584377] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.584379] system 00:00: [io  0xffff] has been reserved
[    0.584380] system 00:00: [io  0xffff] has been reserved
[    0.584381] system 00:00: [io  0xffff] has been reserved
[    0.584382] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.584383] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.584387] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.584477] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.584514] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.584517] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.584543] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.584559] pnp 00:04: Plug and Play ACPI device, IDs DLLb6b2 PNP0f13 (active)
[    0.584788] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.584789] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.584790] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.584792] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.584793] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.584794] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.584796] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.584797] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.584802] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.584803] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.584806] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.584845] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.584846] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.584847] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.584849] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.584850] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.584851] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.584852] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.584855] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.585979] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
[    0.585980] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved
[    0.585983] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.592790] pnp: PnP ACPI: found 8 devices
[    0.598428] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.598454] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.598457] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.598461] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf2fffff]
[    0.598464] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.598468] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.598472] pci 0000:00:1c.4:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.598478] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.598480] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.598484] pci 0000:00:1c.5:   bridge window [mem 0xdf000000-0xdf0fffff]
[    0.598486] pci 0000:00:1c.5:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.598492] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.598493] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.598495] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.598496] pci_bus 0000:00: resource 7 [mem 0x7c000000-0xdfffffff window]
[    0.598497] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.598499] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.598500] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf2fffff]
[    0.598501] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.598503] pci_bus 0000:02: resource 1 [mem 0xdf100000-0xdf1fffff]
[    0.598504] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.598505] pci_bus 0000:03: resource 1 [mem 0xdf000000-0xdf0fffff]
[    0.598506] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.598663] NET: Registered protocol family 2
[    0.598782] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.598831] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.598975] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.599065] TCP: Hash tables configured (established 131072 bind 65536)
[    0.599093] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.599129] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.599184] NET: Registered protocol family 1
[    0.599188] NET: Registered protocol family 44
[    0.599196] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.600293] PCI: CLS 0 bytes, default 64
[    0.600323] Unpacking initramfs...
[    0.694174] Freeing initrd memory: 9508K
[    0.694205] DMAR: ACPI device "device:65" under DMAR at fed91000 as 00:15.0
[    0.694207] DMAR: ACPI device "device:66" under DMAR at fed91000 as 00:15.1
[    0.694223] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.694224] software IO TLB: mapped [mem 0x646b0000-0x686b0000] (64MB)
[    0.694242] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb6cc5db, max_idle_ns: 440795203504 ns
[    0.694257] clocksource: Switched to clocksource tsc
[    0.694320] Scanning for low memory corruption every 60 seconds
[    0.694769] Initialise system trusted keyrings
[    0.694777] Key type blacklist registered
[    0.694811] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.695903] zbud: loaded
[    0.696137] pstore: using zstd compression
[    0.697156] Key type asymmetric registered
[    0.697157] Asymmetric key parser 'x509' registered
[    0.697163] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.697188] io scheduler noop registered
[    0.697189] io scheduler deadline registered
[    0.697223] io scheduler cfq registered (default)
[    0.697224] io scheduler mq-deadline registered
[    0.697225] io scheduler kyber registered
[    0.697242] io scheduler bfq registered
[    0.697258] io scheduler bfq-sq registered
[    0.697259] BFQ I/O-scheduler: v9 (with cgroups support)
[    0.697260] blkcg_policy_register: BLKCG_MAX_POLS too small
[    0.697854] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.697922] efifb: probing for efifb
[    0.697933] efifb: framebuffer at 0xb0000000, using 8128k, total 8128k
[    0.697934] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.697935] efifb: scrolling: redraw
[    0.697936] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.697970] fbcon: Deferring console take-over
[    0.697970] fb0: EFI VGA frame buffer device
[    0.697976] intel_idle: MWAIT substates: 0x11142120
[    0.697977] intel_idle: v0.4.1 model 0x4E
[    0.698146] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.698213] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.698221] ACPI: Lid Switch [LID0]
[    0.698244] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.698249] ACPI: Power Button [PBTN]
[    0.698272] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.698277] ACPI: Sleep Button [SBTN]
[    0.698302] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.698306] ACPI: Power Button [PWRF]
[    0.700429] thermal LNXTHERM:00: registered as thermal_zone0
[    0.700430] ACPI: Thermal Zone [THM] (25 C)
[    0.700827] thermal LNXTHERM:01: registered as thermal_zone1
[    0.700828] ACPI: Thermal Zone [TZ00] (28 C)
[    0.700969] thermal LNXTHERM:02: registered as thermal_zone2
[    0.700970] ACPI: Thermal Zone [TZ01] (30 C)
[    0.701173] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.702251] usbcore: registered new interface driver usbserial_generic
[    0.702255] usbserial: USB Serial support registered for generic
[    0.702273] rtc_cmos 00:01: RTC can wake from S4
[    0.702775] rtc_cmos 00:01: registered as rtc0
[    0.702788] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.702832] intel_pstate: Intel P-state driver initializing
[    0.702944] intel_pstate: HWP enabled
[    0.702971] ledtrig-cpu: registered to indicate activity on CPUs
[    0.702994] intel_pmc_core:  initialized
[    0.703164] NET: Registered protocol family 10
[    0.705957] Segment Routing with IPv6
[    0.705998] NET: Registered protocol family 17
[    0.706363] RAS: Correctable Errors collector initialized.
[    0.706411] microcode: sig=0x406e3, pf=0x80, revision=0xc6
[    0.706510] microcode: Microcode Update Driver: v2.2.
[    0.706517] sched_clock: Marking stable (709484271, -2977232)->(711093419, -4586380)
[    0.706718] registered taskstats version 1
[    0.706723] Loading compiled-in X.509 certificates
[    0.708261] Loaded X.509 cert 'Build time autogenerated kernel key: 7f6e4b3182e05b628a0542b67232d36148044914'
[    0.708273] zswap: loaded using pool lzo/zbud
[    0.710708] Key type big_key registered
[    0.711642]   Magic number: 10:578:580
[    0.711663] pci_bus 0000:01: hash matches
[    0.711665] acpi LNXPOWER:1b: hash matches
[    0.711849] rtc_cmos 00:01: setting system clock to 2018-11-18 11:33:44 UTC (1542540824)
[    0.929739] Freeing unused decrypted memory: 2040K
[    1.093054] Freeing unused kernel image memory: 1536K
[    1.093101] Write protecting the kernel read-only data: 18432k
[    1.094156] Freeing unused kernel image memory: 2008K
[    1.094325] Freeing unused kernel image memory: 408K
[    1.100281] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.100281] x86/mm: Checking user space page tables
[    1.106053] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.106054] Run /init as init process
[    1.123165] fbcon: Taking over console
[    1.123263] Console: switching to colour frame buffer device 240x67
[    1.183186] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.183750] i8042: Warning: Keylock active
[    1.185086] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.185133] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.196640] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.196646] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.196971] SCSI subsystem initialized
[    1.197722] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[    1.197728] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.198025] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.198027] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.198029] usb usb1: Product: xHCI Host Controller
[    1.198031] usb usb1: Manufacturer: Linux 4.19.2-1-MANJARO xhci-hcd
[    1.198032] usb usb1: SerialNumber: 0000:00:14.0
[    1.198147] hub 1-0:1.0: USB hub found
[    1.198165] hub 1-0:1.0: 12 ports detected
[    1.199686] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.199690] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.199693] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    1.199734] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    1.199736] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.199737] usb usb2: Product: xHCI Host Controller
[    1.199739] usb usb2: Manufacturer: Linux 4.19.2-1-MANJARO xhci-hcd
[    1.199740] usb usb2: SerialNumber: 0000:00:14.0
[    1.199827] hub 2-0:1.0: USB hub found
[    1.199839] hub 2-0:1.0: 6 ports detected
[    1.205674] libata version 3.00 loaded.
[    1.209351] ahci 0000:00:17.0: version 3.0
[    1.209582] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
[    1.211359] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.219736] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.219739] ahci 0000:00:17.0: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst 
[    1.220143] scsi host0: ahci
[    1.220348] scsi host1: ahci
[    1.220378] ata1: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b100 irq 123
[    1.220380] ata2: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b180 irq 123
[    1.528554] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[    1.533336] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.534291] ata1.00: supports DRM functions and may not be fully accessible
[    1.534369] ata1.00: ATA-10: CT1000MX500SSD1, M3CR022, max UDMA/133
[    1.534374] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.535533] ata1.00: supports DRM functions and may not be fully accessible
[    1.536497] ata1.00: configured for UDMA/133
[    1.546673] ahci 0000:00:17.0: port does not support device sleep
[    1.547236] scsi 0:0:0:0: Direct-Access     ATA      CT1000MX500SSD1  022  PQ: 0 ANSI: 5
[    1.738650] usb 1-5: New USB device found, idVendor=0c45, idProduct=6712, bcdDevice=51.05
[    1.738656] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    1.738660] usb 1-5: Product: Integrated_Webcam_HD
[    1.738664] usb 1-5: Manufacturer: CN0V359T724875ADA5NLA00
[    1.863200] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.864810] ata2.00: ATAPI: MATSHITA DVD+/-RW UJ8E2, 1.01, max UDMA/133
[    1.867244] ata2.00: configured for UDMA/133
[    1.868527] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[    1.870266] scsi 1:0:0:0: CD-ROM            MATSHITA DVD+-RW UJ8E2    1.01 PQ: 0 ANSI: 5
[    1.916748] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.916750] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.916759] sd 0:0:0:0: [sda] Write Protect is off
[    1.916762] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.916775] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.919997]  sda: sda1 sda2 sda3
[    1.920523] sd 0:0:0:0: [sda] supports TCG Opal
[    1.920525] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.947514] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.947518] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.947791] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.009771] usb 1-6: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[    2.009777] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.009781] usb 1-6: Product: USB2.0-CRW
[    2.009784] usb 1-6: Manufacturer: Generic
[    2.009787] usb 1-6: SerialNumber: 20100201396000000
[    2.017107] usbcore: registered new interface driver rtsx_usb
[    2.085244] random: fast init done
[    2.131916] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[    2.273133] usb 1-8: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
[    2.273140] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.379726] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.509815] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    2.525482] systemd[1]: Detected architecture x86-64.
[    2.530305] systemd[1]: Set hostname to <daniel-pc>.
[    2.689303] random: systemd: uninitialized urandom read (16 bytes read)
[    2.689373] systemd[1]: Listening on udev Kernel Socket.
[    2.689510] random: systemd: uninitialized urandom read (16 bytes read)
[    2.690723] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.690812] random: systemd: uninitialized urandom read (16 bytes read)
[    2.690858] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.690943] systemd[1]: Reached target Swap.
[    2.691007] systemd[1]: Reached target Login Prompts.
[    2.691119] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.691231] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.708863] EXT4-fs (sda2): re-mounted. Opts: discard
[    2.719177] audit: type=1130 audit(1542540826.503:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.727975] audit: type=1130 audit(1542540826.510:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.732004] audit: type=1130 audit(1542540826.516:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.733554] audit: type=1130 audit(1542540826.516:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.735049] audit: type=1130 audit(1542540826.516:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.751202] audit: type=1130 audit(1542540826.533:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.760684] systemd-journald[231]: Received request to flush runtime journal from PID 1
[    2.772827] audit: type=1130 audit(1542540826.556:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.782329] audit: type=1130 audit(1542540826.566:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.805071] audit: type=1130 audit(1542540826.586:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.881207] ACPI: AC Adapter [AC] (on-line)
[    2.903951] battery: ACPI: Battery Slot [BAT0] (battery present)
[    2.910838] input: DELL Wireless hotkeys as /devices/virtual/input/input6
[    2.910928] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[    2.914657] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[    2.920816] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[    2.923553] hidraw: raw HID events driver (C) Jiri Kosina
[    2.943479] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    2.943515] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    2.951797] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    2.970242] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    2.973755] Linux agpgart interface v0.103
[    2.976973] i2c_hid i2c-DLLC6B2:00: i2c-DLLC6B2:00 supply vdd not found, using dummy regulator
[    2.976988] i2c_hid i2c-DLLC6B2:00: Linked as a consumer to regulator.0
[    2.976990] i2c_hid i2c-DLLC6B2:00: i2c-DLLC6B2:00 supply vddl not found, using dummy regulator
[    2.985691] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    3.005891] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    3.022672] libphy: r8169: probed
[    3.022841] r8169 0000:03:00.0 eth0: RTL8106e, f8:ca:b8:0f:e7:fd, XID 44900000, IRQ 125
[    3.024781] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.025180] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    3.025524] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    3.041377] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    3.041379] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.041380] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.041381] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.041382] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.041383] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    3.045527] media: Linux media interface: v0.10
[    3.068306] cryptd: max_cpu_qlen set to 1000
[    3.074758] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.118688] AVX2 version of gcm_enc/dec engaged.
[    3.118689] AES CTR mode by8 optimization enabled
[    3.128965] videodev: Linux video capture interface: v2.00
[    3.130275] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
[    3.176850] Intel(R) Wireless WiFi driver for Linux
[    3.176851] Copyright(c) 2003- 2015 Intel Corporation
[    3.177102] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[    3.185053] iwlwifi 0000:02:00.0: loaded firmware version 17.3216344376.0 op_mode iwlmvm
[    3.311702] random: crng init done
[    3.311704] random: 7 urandom warning(s) missed due to ratelimiting
[    3.492610] Bluetooth: Core ver 2.22
[    3.492624] NET: Registered protocol family 31
[    3.492625] Bluetooth: HCI device and connection manager initialized
[    3.492628] Bluetooth: HCI socket layer initialized
[    3.492630] Bluetooth: L2CAP socket layer initialized
[    3.492635] Bluetooth: SCO socket layer initialized
[    3.500104] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    3.552944] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    3.570923] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
[    3.592396] iwlwifi 0000:02:00.0: base HW address: 78:0c:b8:66:96:94
[    3.596312] usbcore: registered new interface driver btusb
[    3.619003] Bluetooth: hci0: read Intel version: 3707100100012d0d00
[    3.620844] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq
[    3.649365] VFIO - User Level meta-driver version: 0.3
[    3.665200] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6712)
[    3.711126] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input9
[    3.718728] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    3.732246] Bluetooth: hci0: Intel firmware patch completed and activated
[    3.736426] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[    3.736429] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
[    3.736431] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[    3.736433] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[    3.736498] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input10
[    3.736567] usbcore: registered new interface driver uvcvideo
[    3.736568] USB Video Class driver (1.1.1)
[    3.744352] iTCO_vendor_support: vendor-support=0
[    3.772922] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.772998] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    3.773127] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.799401] input: DLLC6B2:00 06CB:75BF Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-DLLC6B2:00/0018:06CB:75BF.0001/input/input11
[    3.799548] input: DLLC6B2:00 06CB:75BF Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-DLLC6B2:00/0018:06CB:75BF.0001/input/input12
[    3.799621] hid-generic 0018:06CB:75BF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLLC6B2:00 06CB:75BF] on i2c-DLLC6B2:00
[    3.867691] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    3.874462] checking generic (b0000000 7f0000) vs hw (b0000000 10000000)
[    3.874463] fb: switching to inteldrmfb from EFI VGA
[    3.874494] Console: switching to colour dummy device 80x25
[    3.874568] [drm] Replacing VGA console driver
[    3.879110] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.879112] [drm] Driver supports precise vblank timestamp query.
[    3.879612] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.880382] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[    3.920320] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[    3.921987] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.923165] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[    3.923332] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.932494] input: DLLC6B2:00 06CB:75BF Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-DLLC6B2:00/0018:06CB:75BF.0001/input/input16
[    3.932570] hid-multitouch 0018:06CB:75BF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLLC6B2:00 06CB:75BF] on i2c-DLLC6B2:00
[    3.934279] fbcon: inteldrmfb (fb0) is primary device
[    3.996118] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    3.996953] Generic PHY r8169-300:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[    4.035100] intel_rapl: Found RAPL domain package
[    4.035101] intel_rapl: Found RAPL domain core
[    4.035102] intel_rapl: Found RAPL domain uncore
[    4.035103] intel_rapl: Found RAPL domain dram
[    4.072572] [drm] radeon kernel modesetting enabled.
[    4.072591] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[    4.072728] ATPX version 1, functions 0x00000033
[    4.072829] ATPX Hybrid Graphics
[    4.080902] mousedev: PS/2 mouse device common for all mice
[    4.261960] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    4.263232] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    4.282460] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    4.426411] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    4.592415] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    5.068187] Console: switching to colour frame buffer device 240x67
[    5.088664] radeon 0000:01:00.0: enabling device (0006 -> 0007)
[    5.088812] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.091402] [drm] initializing kernel modesetting (HAINAN 0x1002:0x6660 0x1028:0x06B2 0x81).
[    5.091421] vga_switcheroo: enabled
[    5.170684] ATOM BIOS: DELL
[    5.170694] [drm] GPU not posted. posting now...
[    5.174997] radeon 0000:01:00.0: VRAM: 4096M 0x0000000000000000 - 0x00000000FFFFFFFF (4096M used)
[    5.174999] radeon 0000:01:00.0: GTT: 2048M 0x0000000100000000 - 0x000000017FFFFFFF
[    5.175011] [drm] Detected VRAM RAM=4096M, BAR=256M
[    5.175012] [drm] RAM width 64bits DDR
[    5.175634] [TTM] Zone  kernel: Available graphics memory: 8157078 kiB
[    5.175636] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    5.175636] [TTM] Initializing pool allocator
[    5.175640] [TTM] Initializing DMA pool allocator
[    5.175657] [drm] radeon: 4096M of VRAM memory ready
[    5.175658] [drm] radeon: 2048M of GTT memory ready.
[    5.175670] [drm] Loading hainan Microcode
[    5.178669] [drm] Internal thermal controller without fan control
[    5.186315] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.186317] Bluetooth: BNEP filters: protocol multicast
[    5.186320] Bluetooth: BNEP socket layer initialized
[    5.188920] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3234: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    5.188923] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.188925] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    5.188926] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    5.188928] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    5.188930] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[    5.188931] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1a
[    5.188933] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    5.190181] [drm] radeon: dpm initialized
[    5.190185] [drm] GART: num cpu pages 524288, num gpu pages 524288
[    5.192743] [drm] PCIE gen 3 link speeds already enabled
[    5.211827] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[    5.211953] radeon 0000:01:00.0: WB enabled
[    5.211956] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000100000c00 and cpu addr 0x00000000a7ec37bf
[    5.211958] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000100000c04 and cpu addr 0x00000000d73b69e6
[    5.211960] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000100000c08 and cpu addr 0x000000003c8a0c09
[    5.211961] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000100000c0c and cpu addr 0x0000000063cb2fc8
[    5.211963] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000100000c10 and cpu addr 0x00000000d6229349
[    5.211964] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.211965] [drm] Driver supports precise vblank timestamp query.
[    5.211966] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    5.212605] radeon 0000:01:00.0: radeon: using MSI.
[    5.212623] [drm] radeon: irq initialized.
[    5.228007] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    5.255270] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    5.256711] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    5.256766] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    5.257371] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    5.257425] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    5.257481] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[    5.257530] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[    5.428566] [drm] ring test on 0 succeeded in 2 usecs
[    5.428571] [drm] ring test on 1 succeeded in 1 usecs
[    5.428576] [drm] ring test on 2 succeeded in 1 usecs
[    5.428584] [drm] ring test on 3 succeeded in 4 usecs
[    5.428590] [drm] ring test on 4 succeeded in 3 usecs
[    5.428752] [drm] ib test on ring 0 succeeded in 0 usecs
[    5.428781] [drm] ib test on ring 1 succeeded in 0 usecs
[    5.428851] [drm] ib test on ring 2 succeeded in 0 usecs
[    5.428871] [drm] ib test on ring 3 succeeded in 0 usecs
[    5.428894] [drm] ib test on ring 4 succeeded in 0 usecs
[    5.429104] [drm] Radeon Display Connectors
[    5.431191] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1
[    5.636241] [drm] amdgpu kernel modesetting enabled.
[    5.636260] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[    5.636394] ATPX version 1, functions 0x00000033
[    5.636492] ATPX Hybrid Graphics
[    6.073915] kauditd_printk_skb: 32 callbacks suppressed
[    6.073916] audit: type=1701 audit(1542540829.856:43): auid=4294967295 uid=120 gid=120 ses=4294967295 pid=1293 comm="Xorg" exe="/usr/lib/Xorg" sig=6 res=1
[    6.086167] audit: type=1130 audit(1542540829.870:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@0-1741-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.558661] audit: type=1131 audit(1542540830.340:45): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@120 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.586206] audit: type=1131 audit(1542540830.370:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@120 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.646083] audit: type=1131 audit(1542540830.430:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@0-1741-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.651798] audit: type=1130 audit(1542540830.433:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@120 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.663012] audit: type=1006 audit(1542540830.446:49): pid=2033 uid=0 old-auid=4294967295 auid=120 tty=(none) old-ses=4294967295 ses=2 res=1
[    6.699775] audit: type=1130 audit(1542540830.483:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@120 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.127194] fuse init (API version 7.27)
[    7.513423] audit: type=1130 audit(1542540831.296:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.890281] Bluetooth: RFCOMM TTY layer initialized
[    7.890287] Bluetooth: RFCOMM socket layer initialized
[    7.890292] Bluetooth: RFCOMM ver 1.11
[    8.517896] audit: type=1130 audit(1542540832.300:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-localed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.006383] kauditd_printk_skb: 5 callbacks suppressed
[   14.006384] audit: type=1131 audit(1542540837.793:58): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.929123] audit: type=1006 audit(1542540843.713:59): pid=5369 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[   19.938893] audit: type=1130 audit(1542540843.723:60): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.948274] audit: type=1006 audit(1542540843.730:61): pid=9260 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=4 res=1
[   19.986777] audit: type=1130 audit(1542540843.770:62): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   20.001631] audit: type=1112 audit(1542540843.783:63): pid=5369 uid=0 auid=1000 ses=3 msg='uid=1000 exe="/usr/lib/gdm-session-worker" hostname=? addr=? terminal=? res=success'
[   20.851827] [drm] PCIE gen 3 link speeds already enabled
[   20.862977] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[   20.863086] radeon 0000:01:00.0: WB enabled
[   20.863089] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000100000c00 and cpu addr 0x00000000a7ec37bf
[   20.863091] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000100000c04 and cpu addr 0x00000000d73b69e6
[   20.863093] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000100000c08 and cpu addr 0x000000003c8a0c09
[   20.863094] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000100000c0c and cpu addr 0x0000000063cb2fc8
[   20.863096] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000100000c10 and cpu addr 0x00000000d6229349
[   21.064970] [drm] ring test on 0 succeeded in 1 usecs
[   21.064975] [drm] ring test on 1 succeeded in 1 usecs
[   21.064980] [drm] ring test on 2 succeeded in 1 usecs
[   21.064988] [drm] ring test on 3 succeeded in 4 usecs
[   21.064994] [drm] ring test on 4 succeeded in 3 usecs
[   21.065026] [drm] ib test on ring 0 succeeded in 0 usecs
[   21.065050] [drm] ib test on ring 1 succeeded in 0 usecs
[   21.065073] [drm] ib test on ring 2 succeeded in 0 usecs
[   21.065086] [drm] ib test on ring 3 succeeded in 0 usecs
[   21.065098] [drm] ib test on ring 4 succeeded in 0 usecs
[   23.036483] audit: type=1130 audit(1542540846.820:64): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   23.349895] audit: type=1130 audit(1542540847.133:65): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=org.cups.cupsd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   23.363981] rfkill: input handler disabled
[   26.138010] audit: type=1130 audit(1542540849.920:66): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   31.142962] audit: type=1131 audit(1542540854.926:67): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   40.014248] audit: type=1131 audit(1542540863.796:68): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=fprintd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   55.007799] audit: type=1131 audit(1542540878.790:69): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-localed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   55.393246] audit: type=1131 audit(1542540879.176:70): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   57.943688] audit: type=1111 audit(1542540881.726:71): pid=344 uid=0 auid=4294967295 ses=4294967295 msg='op=connection-add-activate uuid=4e2bc77b-cb7a-467c-85c4-bf998144e8ae name=486F6F6B20656D20486F726E73 pid=10232 uid=1000 result=success exe="/usr/bin/NetworkManager" hostname=? addr=? terminal=? res=success'
[   57.951259] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   69.026455] audit: type=1131 audit(1542540892.810:72): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=geoclue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   97.737561] wlp2s0: authenticate with 38:10:d5:30:65:fb
[   97.742920] wlp2s0: send auth to 38:10:d5:30:65:fb (try 1/3)
[   97.746139] wlp2s0: authenticated
[   97.748532] wlp2s0: associate with 38:10:d5:30:65:fb (try 1/3)
[   97.757032] wlp2s0: RX AssocResp from 38:10:d5:30:65:fb (capab=0x1511 status=0 aid=1)
[   97.757589] wlp2s0: associated
[   97.796131] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 38:10:d5:30:65:fb
[   97.796165] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   97.876122] audit: type=1130 audit(1542540921.660:73): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  108.006815] audit: type=1131 audit(1542540931.790:74): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  212.881867] audit: type=1130 audit(1542541036.666:75): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=man-db comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  212.881870] audit: type=1131 audit(1542541036.666:76): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=man-db comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  265.223545] [drm] PCIE gen 3 link speeds already enabled
[  265.233615] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[  265.233732] radeon 0000:01:00.0: WB enabled
[  265.233735] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000100000c00 and cpu addr 0x00000000a7ec37bf
[  265.233736] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000100000c04 and cpu addr 0x00000000d73b69e6
[  265.233737] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000100000c08 and cpu addr 0x000000003c8a0c09
[  265.233738] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000100000c0c and cpu addr 0x0000000063cb2fc8
[  265.233739] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000100000c10 and cpu addr 0x00000000d6229349
[  265.436636] [drm] ring test on 0 succeeded in 1 usecs
[  265.436641] [drm] ring test on 1 succeeded in 1 usecs
[  265.436645] [drm] ring test on 2 succeeded in 1 usecs
[  265.436654] [drm] ring test on 3 succeeded in 4 usecs
[  265.436661] [drm] ring test on 4 succeeded in 4 usecs
[  265.436710] [drm] ib test on ring 0 succeeded in 0 usecs
[  265.436744] [drm] ib test on ring 1 succeeded in 0 usecs
[  265.436767] [drm] ib test on ring 2 succeeded in 0 usecs
[  265.436779] [drm] ib test on ring 3 succeeded in 0 usecs
[  265.436791] [drm] ib test on ring 4 succeeded in 0 usecs

dmesg | grep sd has the following output:

[    0.009728] ACPI: SSDT 0x0000000077FF6570 003531 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.009733] ACPI: SSDT 0x0000000077FF9AF0 000E58 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    1.219739] ahci 0000:00:17.0: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst 
[    1.916748] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.916750] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.916759] sd 0:0:0:0: [sda] Write Protect is off
[    1.916762] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.916775] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.919997]  sda: sda1 sda2 sda3
[    1.920523] sd 0:0:0:0: [sda] supports TCG Opal
[    1.920525] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.379726] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.708863] EXT4-fs (sda2): re-mounted. Opts: discard
[    3.130275] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
[   23.349895] audit: type=1130 audit(1542540847.133:65): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=org.cups.cupsd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

If you need anything else let me know

[deesnook]

Thanks, I did the steps you recommended.

This is the output it get with sudo parted -l:

Modell: ATA CT1000MX500SSD1 (scsi)
Festplatte  /dev/sda:  1000GB
Sektorgröße (logisch/physisch): 512B/4096B
Partitionstabelle: gpt
Disk-Flags: 

Nummer  Anfang  Ende    Größe  Dateisystem  Name  Flags
 3      1049kB  316MB   315MB  fat32              msftdata
 2      316MB   105GB   105GB  ext4
 1      105GB   1000GB  895GB  ext4

so I'm pretty sure I'm booted in UEFI/GPT.

The output for findmnt -s is:

TARGET SOURCE                                    FSTYPE OPTIONS
/boot/efi
       UUID=0FD5-5B02                            vfat   defaults,noatime
/      UUID=1dd2f4c0-4ad5-4891-be00-23480ab3a05b ext4   defaults,noatime,discard
/home  UUID=cc8e6c23-8295-419c-84b7-5aa54487b963 ext4   defaults,noatime,discard
/tmp   tmpfs                                     tmpfs  defaults,noatime,mode=17

The output for efibootmgr is.

BootCurrent: 0007
Timeout: 0 seconds
BootOrder: 0008,0001,0002,0004,0005,0006,0007
Boot0000  Windows Boot Manager
Boot0001* Diskette Drive
Boot0002* Internal HDD
Boot0003* ubuntu
Boot0004* CD/DVD/CD-RW Drive
Boot0005* Onboard NIC
Boot0006* USB Storage Device
Boot0007* UEFI: CT1000MX500SSD1, Partition 3
Boot0008* manjaro

In /etc/default/grub the setting was GRUB_TIMEOUT_STYLE=menu

I'm now going to reboot, let's see if it works...thanks a lot so far!

[deesnook]

OK, so I rebooted a couple of times. The first five times the boot process still got hung right after

[OK] started TLP system startup/shutdown

The sixth time it worked without any further output shown, after the aforementioned line Manjaro went directly to the login screen.

The grub menu, however, now shows every time I boot

[deesnook]

I finally get what you're driving at. Booting in MSDOS refers to the bootup of the live system I want to install from. I thought you were referring to booting up the installed MSDOS/MBR system from the SSD. That's why I was confused, sorry about that.

So to clear things up, what I did was:

• boot the live system from USB drive in UEFI mode and install a UEFI/GPT system --> installation worked, except for the boot problems I encountered

• boot the live system from USB drive in UEFI mode and try to install an MSDOS/MBR system --> this didn't work (as expected) for the reasons you mentioned

What I haven't tried so far is booting the live system from USB drive in MSDOS/MBR/BIOS/legacy mode and installing an MSDOS/MBR system

[gohlip]

@deesnook

The grub menu, however, now shows every time I boot

Good. The grub thingy is not an issue now.
But do not go trying to boot in bios-legacy or change into msdos.
That will mess things further.

Now, as to tlp issue. there can be several causes.
A quick search will show some have resolved it by using another kernel and some need to fix the graphic drivers.

I personally do not have this issue at any time and if some here suggest some things for you, it is better to listen to them than from me.

But, to troubleshoot, first try to boot to prompt [1], if that is not a problem, most likely it is a graphic issue.

To boot to prompt, manually add a
3' (no apostrophe) to linux line of grub entry.
Log in with password.
As said, if it boots to prompt, fix the graphic driver.
But first update/upgrade (pacman -Syyuu).
I personally fix graphic issues by first removing all installed drivers, then let mhwd install the correct driver.

mhwd -li
sudo mhwd  -r pci <all installed>
sudo pacman -Syu
sudo mhwd -a pci free 0300 (or nonfree)
sudo pacman -Syu

If you have hybrid/dual graphic cards (primus/bumblebee....), tell us and some expert (not me) will help out.

If is is not a graphic driver issue, try another kernel.
Good luck. That's all I can do here. Take care.

[stephane]

@deesnook

3 1049kB 316MB 315MB fat32 msftdata

this should be boot,esp flags ( required after add mountpoints on install )
can you change with USB install key & Gparted ?

[deesnook]

@stephane

this should be boot,esp flags

Indeed it should be, and that is how I set it on install. I don't know why it changed. I corrected it using GParted from the live system, but it didn't help...thanks nonetheless!

[AgentS]

@deesnook

it didn’t help

What is your current problem after all?
Have you followed @gohlip advice?

[deesnook]

Same problem like before (random bootup hangs). I'm now trying to follow @gohlip 's advice fixing the graphic issues.

Following @stephane's advice I also noticed that the partition order is reversed. I had set up the boot/efi partition as sda1, the root partition as sda2 and the home partition as sda3. Now it's just the other way round. Home is sda1, root sda2 and boot/efi sda3 (?!?!?)

[AgentS]

@deesnook

the partition order is reversed. I had set up

You cannot permanently set the partition name. That's why we use UUID to specify partitions.

About your issue, random failures are not bootloader related normally. That's why you should look for video drivers setup as advised, getting relevant system info and logs.

[deesnook]

I followed the steps, but to no avail. Same random bootups, this time it worked the seventh time I tried.

I have two graphics cards, one integrated Intel chipset (HD graphics 520) and one dedicated card (AMD Radeon R5 M335, the chipset supposedly is Sun XT). In the Manjaro settings, it shows the video-linux drivers installed for both cards. Should I maybe change something there?

The output for sudo lspci -k is:

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 08)
	Subsystem: Dell Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers
	Kernel driver in use: skl_uncore
00:02.0 VGA compatible controller: Intel Corporation Skylake GT2 [HD Graphics 520] (rev 07)
	DeviceName:  Onboard IGD
	Subsystem: Dell Skylake GT2 [HD Graphics 520]
	Kernel driver in use: i915
	Kernel modules: i915
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
	Subsystem: Dell Sunrise Point-LP USB 3.0 xHCI Controller
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
	Subsystem: Dell Sunrise Point-LP Thermal subsystem
	Kernel driver in use: intel_pch_thermal
	Kernel modules: intel_pch_thermal
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)
	Subsystem: Dell Sunrise Point-LP Serial IO I2C Controller
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci
00:15.1 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 (rev 21)
	Subsystem: Dell Sunrise Point-LP Serial IO I2C Controller
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
	Kernel driver in use: mei_me
	Kernel modules: mei_me
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
	Subsystem: Dell Sunrise Point-LP SATA Controller [AHCI mode]
	Kernel driver in use: ahci
	Kernel modules: ahci
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 (rev f1)
	Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1)
	Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
	Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)
	Subsystem: Dell Sunrise Point-LP LPC Controller
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
	Subsystem: Dell Sunrise Point-LP PMC
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
	Subsystem: Dell Sunrise Point-LP HD Audio
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel, snd_soc_skl
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
	Subsystem: Dell Sunrise Point-LP SMBus
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801
01:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430 / R7 M520] (rev 81)
	Subsystem: Dell Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430 / R7 M520]
	Kernel driver in use: radeon
	Kernel modules: radeon, amdgpu
02:00.0 Network controller: Intel Corporation Wireless 3160 (rev 83)
	Subsystem: Intel Corporation Dual Band Wireless AC 3160
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller (rev 07)
	Subsystem: Dell RTL810xE PCI Express Fast Ethernet controller
	Kernel driver in use: r8169
	Kernel modules: r8169

This is the output for sudo lspci -k of the system running on the old HDD:

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 08)
	Subsystem: Dell Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers
	Kernel driver in use: skl_uncore
00:02.0 VGA compatible controller: Intel Corporation Skylake GT2 [HD Graphics 520] (rev 07)
	DeviceName:  Onboard IGD
	Subsystem: Dell Skylake GT2 [HD Graphics 520]
	Kernel driver in use: i915
	Kernel modules: i915
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
	Subsystem: Dell Sunrise Point-LP USB 3.0 xHCI Controller
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
	Subsystem: Dell Sunrise Point-LP Thermal subsystem
	Kernel driver in use: intel_pch_thermal
	Kernel modules: intel_pch_thermal
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)
	Subsystem: Dell Sunrise Point-LP Serial IO I2C Controller
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci
00:15.1 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 (rev 21)
	Subsystem: Dell Sunrise Point-LP Serial IO I2C Controller
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
	Kernel driver in use: mei_me
	Kernel modules: mei_me
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
	Subsystem: Dell Sunrise Point-LP SATA Controller [AHCI mode]
	Kernel driver in use: ahci
	Kernel modules: ahci
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 (rev f1)
	Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1)
	Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
	Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)
	Subsystem: Dell Sunrise Point-LP LPC Controller
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
	Subsystem: Dell Sunrise Point-LP PMC
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
	Subsystem: Dell Sunrise Point-LP HD Audio
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel, snd_soc_skl
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
	Subsystem: Dell Sunrise Point-LP SMBus
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801
01:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430 / R7 M520] (rev 81)
	Subsystem: Dell Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430 / R7 M520]
	Kernel driver in use: radeon
	Kernel modules: radeon, amdgpu
02:00.0 Network controller: Intel Corporation Wireless 3160 (rev 83)
	Subsystem: Intel Corporation Dual Band Wireless AC 3160
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller (rev 07)
	Subsystem: Dell RTL810xE PCI Express Fast Ethernet controller
	Kernel driver in use: r8169
	Kernel modules: r8169

Looks the same to me. The kernels used are identical too (4.19.2-1). However, with the system on my old HDD no such boot problems occur.

[dglt]

right now are you able to boot into a graphical desktop or are you tty only?