This Linux program provides a solution for GPU switching on Optimus laptops (a.k.a laptops with dual Nvidia/Intel GPUs).
Manjaro is supported: Only Xorg sessions are supported (no Wayland).
Supported display managers are : SDDM, LightDM,
GDM. The program may still work with others but you have to configure them manually (see this section).
Regression: GDM support is currently broken (see this issue : https://github.com/Askannz/optimus-manager/issues/4). You can still use optimus-manager but you will have to manually logout and stop the X server before switching GPUs.
On Windows, the Optimus technology works by dynamically offloading rendering to the Nvidia GPU when running 3D-intensive applications, while the desktop session itself runs on the Intel GPU.
However, on Linux, the Nvidia driver does not provide such offloading capabilities (yet), which makes it difficult to use the full potential of your machine while keeping a reasonable battery life.
Currently, if you have Linux installed on an Optimus laptop, there are three methods to use your Nvidia GPU :
Run your whole X session on the Intel GPU and use Bumblebee to offload rendering to the Nvidia GPU. While this mimic the behavior of Optimus on Windows, this is an unofficial, hacky solution with three major drawbacks : 1. a noticeable performance hit (because Bumblebee has to use your CPU to copy frames over to the display) 2. no support for Vulkan (therefore, it is incompatible with DXVK and any native game using Vulkan, like Shadow of the Tomb Raider for instance) 3. you will be unable to use any video output (like HDMI ports) connected to the Nvidia GPU, unless you have the open-source
nouveaudriver loaded to this GPU at the same time.
Use nvidia-xrun to have the Nvidia GPU run on its own X server in another virtual terminal. You have to keep two X servers running at the same time, which can be detrimental to performance. Also, you do not have acess to your normal desktop environment while in the virtual terminal of the Nvidia GPU, and in my own experience, the nvidia driver is prone to crashing when switching between virtual terminals.
Run your whole X session on the Nvidia GPU and disable rendering on the Intel GPU. This allows you to run your applications at full performance, with Vulkan support, and with access to all video outputs. However, since your power-hungry Nvidia GPU is turned on at all times, so it has a massive impact on your battery life.
This method is often called Nvidia PRIME, although technically PRIME is just the technology that allows your Nvidia GPU to send its frame to the built-in display of your laptop via the Intel GPU.
An acceptable middle ground could be to use the third method on demand : switching the X session to the Nvidia GPU when you need extra rendering power, and then switching it back to Intel when you are done, to save battery life.
Unfortunately the X server configuration is set-up in a permanent manner with configuration files, which makes switching a hassle because you have to rewrite those files every time you want to switch GPUs. You also have to restart the X server for those changes to be taken into account.
This is what this tool does for you : it dynamically writes the X configuration at boot time, rewrites it every time you need to switch GPUs, and also loads the appropriate kernel modules to make sure your GPUs are properly turned on/off.
Note that this is nothing new : Ubuntu has been using that method for years with their
In practice, here is what happens when switching to the Intel GPU (for example) :
- Your login manager is automatically stopped, which also stops the X server (warning : this closes all opened applications)
- The Nvidia modules are unloaded and
nouveauis loaded instead to switch off the card (this can also be done with
nouveaudoes not work)
- The configuration for X and your login manager is updated (note that the configuration is saved to dedicated files, this will not overwrite any of your own configuration files)
- The login manager is restarted.
We are well-aware this is still a hacky solution and we will happily deprecate this tool the day Nvidia implements proper GPU offloading in their Linux driver.
pamac install optimus-manager
Once the package is installed, do not forget to enable the daemon so that it is started at boot time :
# systemctl enable optimus-manager.service
IMPORTANT : make sure you do not have any configuration file conflicting with the ones autogenerated by optimus-manager. In particular, remove everything related to displays or GPUs in
/etc/X11/xorg.conf.d/ and also in
/etc/X11/mhwd.d/. Avoid running
nvidia-xconfig or using the
Save to X Configuration file in the Nvidia control panel. If you need to apply specific options to your Xorg config, see the Configuration section.
If you have bumblebee installed on your system, uninstall it or at least make sure the
bumblebeed service is disabled. Finally, make sure the
bbswitch module is not loaded at boot time (check
If you want to disable optimus-manager completely, then first disable the SystemD service :
# systemctl stop optimus-manager.service # systemctl disable optimus-manager.service
optimus-manager --cleanup as root to remove any leftover autogenerated configuration file. Make sure to do this step before uninstalling the program.
Make sure the SystemD service
optimus-manager.service is running, then run
optimus-manager --switch nvidia
to switch to the Nvidia GPU, and
optimus-manager --switch intel
to switch to the Intel GPU.
WARNING : Switching GPUs automatically restarts your display manager, so make sure you save your work and close all your applications before doing so.
You can setup autologin in your display manager so that you do not have to re-enter your password every time.
You can also specify which GPU you want to be used by default when the system boots :
optimus-manager --set-startup MODE
MODE can be
nvidia_once. The last one is a special mode which makes your system use the Nvidia GPU at boot, but for one boot only. After that it reverts to
intel mode. This can be useful to test your Nvidia configuration and make sure you do not end up with an unusable X server.
The default configuration file can be found at
/usr/share/optimus-manager.conf. Please do not edit this file ; instead, create your own config file at
Any parameter not specified in your config file will take value from the default file.
Please refer to the comments in the default config file for descriptions of the available parameters. In particular, it is possible to set common Xorg options like DRI version or triple buffering, as well as some kernel module loading options.
Those parameters probably do not cover all use cases (yet), but feel free to open an issue if you think something else should be added there.
FAQ / Troubleshooting
General troubleshooting advice : you can view the logs of the optimus-manager daemon by running
journalctl -u optimus-manager.service. Also, check
systemctl status optimus-manager.service to see if the daemon is properly loaded and running.
The Arch wiki can be a great resource for troubleshooting. Check the following pages : NVIDIA, NVDIA Optimus, Bumblebee (even if optimus-manager does not use Bumblebee, some advices related to power switching can still be applicable)
How can I check which GPU my X session is running on ?
You can run
glxinfo | grep "server glx vendor string". If you see
SGI, you are running on the Intel GPU. If you see
NVIDIA Corporation, you are running on the Nvidia GPU.
When I switch GPUs, my system completely locks up (I cannot even switch to a TTY with Ctrl+Alt+Fx)
It is very likely your laptop is plagued by one of the numerous ACPI issues associated with Optimus laptops on Linux, and caused by manufacturers having their own implementations. The symptoms are often similar : a complete system lockup if you try to run any program that uses the Nvidia GPU while it is powered off. Unfortunately there is no universal fix, but the solution often involves adding a kernel parameter to your boot options. You can find more information on this GitHub issue, where people have been reporting solutions for specific laptop models. Check this Arch Wiki page to learn how to set a kernel parameter at boot.
You can also try changing the power switching backend in the configuration file (section
GPU switching works but my system locks up if I am in Intel mode and start any of the following programs : VLC, lspci, anything that polls the PCI devices
This is due to ACPI problems, see the previous question.
I think my Nvidia GPU stays powered on even in Intel mode (my battery drains too fast)
Maybe there is a problem with
nouveau not handling power switching properly. Check
dmesg for errors related to
nouveau or PCI power management. You can also try switching the power switching backend to
Nothing happens when I ask to switch GPUs (the display manager does not stop)
By default, the daemon assumes that your display manager service has the name alias
display-manager (should be the default on Arch and Manjaro). If it isn't the case, you have to specify the name manually so that optimus-manager can find it. See the
login_manager parameter in the configuration file, in the
My display manager is not SDDM, LightDM nor SDDM
login_manager parameter in the configuration file to the name of your login manager service. You must also configure it manually so that it executes the script
/usr/bin/optimus-manager_Xsetup on startup. The X server may still work without that last step but you will see a black screen on your built-in monitor instead of the login window.
The display manager stops but does not restart (a.k.a I am stuck in TTY mode)
This is generally a problem with the X server not restarting. Refer to the next question.
When I try to switch GPUs, I end up with a black screen (or a black screen with only a blinking cursor)
First, make sure your system is not completely locked up and you can still switch between TTYs with Ctrl+Alt+F1,F2,etc. If you cannot, refer to this question.
If you can, it generally means that the X server failed to restart. In addition to the optimus-manager logs, you can check the Xorg logs at
/var/log/Xorg.0.log for more information.
Some fixes you can try :
- Setting the power switching backend to
bbswitchin the configuration file (section
- Changing the DRI versions from 3 to 2
If that does not fix your problem and you have to open a GitHub issue, please attach both the Xorg log and the daemon log.
GPU switching works but I cannot run any 3D application in Intel mode (they fail to launch with some error message)
Check if the
nvidia module is still loaded in Intel mode. That should not happen, but if it is the case, then logout, stop the display manager manually, unload all Nvidia modules (
nvidia_drm, in that order) and restart the display manager.
Consider opening a GitHub issue about this, with logs attached.
I do not use a display manager, or I do not want optimus-manager to stop/restart my display manager
You can disable control of the login manager by leaving blank the option
login_manager in the section
[optimus] of the config file. Please note that you will have to manually stop your X server before switching GPUs, because the rendering kernel modules cannot be unloaded while the server is running.
If you use startx or xinitrc, you also have to add the line
/usr/bin/optimus-manager_Xsetup to your
.xinitrc so that this script is executed when X starts. This may be necessary to set up PRIME.
When I switch to Nvidia, the built-in screen of the laptop stays black but I can still input my password or use monitors plugged to the video output
It seems that PRIME is not properly configured. Please open a GitHub issue with logs attached, and include as much details about your login manager as you can.
Even after disabling the daemon, it is still doing something to my Xorg or login manager configuration.
Make sure to remove any leftover autogenerated config file by running
Please report any issues with this tool upstream.