Qualcomm Atheros QCA9377: ethernet connection drops

Hello to everybody. I have some problems with the ethernet connection, while the wifi is fine. The computer is a Lenovo ideapad S540 IML. When I connect with the ethernet cable I do not switch off the wifi and I see that the connection keep switching between wifi and ethernet. I think that the problem is that the ethernet connection keep dropping. Here is my inxi -Fxxxz:

System: Host: paola-81nf Kernel: 5.6.19-2-MANJARO x86_64 bits: 64 compiler: gcc
v: 10.1.0 Desktop: KDE Plasma 5.19.3 tk: Qt 5.15.0 wm: kwin_x11 dm: SDDM
Distro: Manjaro Linux
Machine: Type: Laptop System: LENOVO product: 81NF v: Lenovo IdeaPad S540-14IML
serial: Chassis: type: 10 v: Lenovo IdeaPad S540-14IML
Mobo: LENOVO model: LNVNB161216 v: SDK0J40709 WIN serial: UEFI: LENOVO
v: CKCN11WW(V1.01) date: 07/19/2019
Battery: ID-1: BAT1 charge: 39.4 Wh condition: 43.0/45.0 Wh (96%) volts: 17.4/15.4
model: 0x53 0x4D 0x50 0x00 0x32 0x30 0x PABAS0241231 type: Li-ion
serial: status: Charging cycles: 225
CPU: Topology: Quad Core model: Intel Core i7-10510U bits: 64 type: MT MCP
arch: Kaby Lake rev: C L2 cache: 8192 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 36812
Speed: 1993 MHz min/max: 400/4900 MHz Core speeds (MHz): 1: 1993 2: 3372
3: 2955 4: 3008 5: 3197 6: 3115 7: 2713 8: 3073
Graphics: Device-1: Intel UHD Graphics vendor: Lenovo driver: i915 v: kernel
bus ID: 00:02.0 chip ID: 8086:9b41
Display: x11 server: X.Org 1.20.8 driver: intel unloaded: modesetting
alternate: fbdev,vesa compositor: kwin_x11 resolution: 1920x1080~60Hz
OpenGL: renderer: Mesa Intel UHD Graphics (CML GT2) v: 4.6 Mesa 20.1.3
direct render: Yes
Audio: Device-1: Intel vendor: Lenovo driver: snd_hda_intel v: kernel bus ID: 00:1f.3
chip ID: 8086:02c8
Sound Server: ALSA v: k5.6.19-2-MANJARO
Network: Device-1: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter
vendor: Lenovo driver: ath10k_pci v: kernel port: 3040 bus ID: 02:00.0
chip ID: 168c:0042
IF: wlp2s0 state: up mac:
Device-2: Qualcomm Atheros type: USB driver: btusb bus ID: 1-10:5
chip ID: 0cf3:e500
Device-3: Realtek RTL8153 Gigabit Ethernet Adapter type: USB driver: r8152
bus ID: 2-3.2:16 chip ID: 0bda:8153 serial:
IF: enp0s20f0u3u2 state: up speed: 1000 Mbps duplex: full mac:
Drives: Local Storage: total: 476.94 GiB used: 126.60 GiB (26.5%)
ID-1: /dev/nvme0n1 model: UMIS RPITJ512PED2OWX size: 476.94 GiB
speed: 31.6 Gb/s lanes: 4 serial: rev: ECFR12.3 scheme: GPT
Partition: ID-1: / size: 459.50 GiB used: 126.60 GiB (27.6%) fs: ext4 dev: /dev/nvme0n1p2
ID-2: swap-1 size: 8.80 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/nvme0n1p3
Sensors: System Temperatures: cpu: 53.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info: Processes: 238 Uptime: 13m Memory: 7.49 GiB used: 1.81 GiB (24.2%)
Init: systemd v: 245 Compilers: gcc: 10.1.0 Shell: bash v: 5.0.18
running in: konsole inxi: 3.0.37

Also, under Hardware configuratin I have only Display controller--> UHD Graphics and nothing more. Is that normal?

Thanks to anyone who can help


This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.

Forum kindly sponsored by