Ryzen 3000 and acpi-cpufreq

[Loacoon]

So, here is my problem. I can't change governor or do or see anything about my cpu.
modprobe acpi-cpufreq gives me this :
modprobe: ERROR: could not insert 'acpi_cpufreq': No such device
and cpupower frequency-info this :
analyse du CPU 0 :
pas de pilotes cpufreq reconnu pour ce CPU
CPUs which run at the same hardware frequency: Not Available
CPUs which need to have their frequency coordinated by software: Not Available
maximum transition latency: Cannot determine or is not supported.
Not Available
régulateurs disponibles : Not Available
Unable to determine current policy
current CPU frequency: Unable to call hardware
current CPU frequency: Unable to call to kernel
boost state support:
Supported: yes
Active: yes
Boost States: 0
Total States: 3
Pstate-P0: 3600MHz
Pstate-P1: 2800MHz
Pstate-P2: 2200MHz

I have not oc'd, and tried with or without PBO. Only thing enabled is XMP.

[Sinister]

Please provide the output from terminal of inxi -Fxxxza --no-host. Please be sure to use 3 ``` before and after the pasted content so it's easier to read. Or you can highlight the test and click the </> button.

How to provide good information in your posts

When asking questions in the forum, it would be most helpful to all members if you provide some basic information. When you provide info from the terminal, usually from your logs, you have to format it so the content is easy to read. First copy and paste your text/terminal/code into the post Then select the text/code and click the post edit toolbar button </> . Another handy way is to use 3 backticks ` at the start and 3 more at the end of the text like this: ``` Paste text or code here …

[Loacoon]

Sorry for the delay of the answer.
I found it. It was a BIOS issue, turns out that, for MSI, "Auto" means "Disabled", so I just had to explicitely enable cool&quiet.