Slow hotspot

Internet speed of hotspot thrown by Manjaro Kde is very very slow. Internet speed is not even 100kbps when using it's hotspot. Is there any way to make it's hotspot speed fast as in windows 10 hotspot?
Same case in XFCE too.

Perhaps you should post some system specs?

Are you not using your built in wifi adapter?

Much more information and clarification is required.

You have been a forum member for a year and a half, you should know specs are required on technical help requests.

2 Likes

Output of sudo lspci

00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller (rev 04)
01:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
01:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller (rev 07)

Your information provided is still woefully lacking.

Please post:

inxi -Fxxxza

Until you provide me with proper information I will only be able to give general types of suggestions.

Is the Ralink wifi adapter listed in lspci what you are trying to get working.

You keep referring to a "hotspot". Are you using this term improperly instead of WIFI. Are you trying to get your Ralink wifi adapter working? You need to clarify this before we can make any progress here.

Do not expect any assistance unless you answer this question.

Please answer all my questions or or I will be unable to help you.

General advice I can give without knowing any of your system specifics.

Have you tested other kernels?

Install and test at least 3 alternate kernels. You should always have at least 2 kernels installed, and you can have as many kernels as you want installed with Manjaro.

Is your bios up to date?

If not you should update your bios.

Please be more cooperative with answering my questions and providing information or helping you will be impossible.

1 Like

If you are trying to get your Ralink wifi adapter's speed to improve (unknown as yet) then perhaps disabling wifi powersaving may help matters.

Read this post of mine:

Test both troubleshooting steps listed there (reboot afterwards), then test for improvements.

1 Like

Output of inxi -Fxxxza

System:
  Host: ashish-pc Kernel: 5.7.0-3-MANJARO x86_64 bits: 64 compiler: gcc 
  v: 10.1.0 
  parameters: BOOT_IMAGE=/boot/vmlinuz-5.7-x86_64 
  root=UUID=17433dff-1db4-482d-a32e-6040f8e6ebff rw quiet apparmor=1 
  security=apparmor resume=UUID=28caae46-edd8-45de-aaf7-b8617447f091 
  udev.log_priority=3 
  Desktop: Xfce 4.14.2 tk: Gtk 3.24.20 info: xfce4-panel wm: xfwm4 
  dm: LightDM 1.30.0 Distro: Manjaro Linux 
Machine:
  Type: Laptop System: Hewlett-Packard product: HP 15 Notebook PC 
  v: 0977100000405F00000610180 serial: <filter> Chassis: type: 10 
  serial: <filter> 
  Mobo: Hewlett-Packard model: 226E v: 74.17 serial: <filter> UEFI: Insyde 
  v: F.16 date: 04/24/2014 
Battery:
  ID-1: BAT1 charge: 14.9 Wh condition: 18.8/18.8 Wh (100%) volts: 16.0/14.8 
  model: 13-42 OA04041 type: Li-ion serial: <filter> status: Unknown 
CPU:
  Topology: Dual Core model: Intel Core i3-3217U bits: 64 type: MT MCP 
  arch: Ivy Bridge family: 6 model-id: 3A (58) stepping: 9 microcode: 21 
  L2 cache: 3072 KiB 
  flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 14372 
  Speed: 798 MHz min/max: 800/1800 MHz Core speeds (MHz): 1: 798 2: 798 
  3: 798 4: 799 
  Vulnerabilities: Type: itlb_multihit status: KVM: Split huge pages 
  Type: l1tf 
  mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable 
  Type: meltdown mitigation: PTI 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, 
  IBRS_FW, STIBP: conditional, RSB filling 
  Type: tsx_async_abort status: Not affected 
Graphics:
  Device-1: Intel 3rd Gen Core processor Graphics vendor: Hewlett-Packard 
  driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0166 
  Display: x11 server: X.Org 1.20.8 driver: intel unloaded: modesetting 
  alternate: fbdev,vesa resolution: 1366x768~60Hz 
  OpenGL: renderer: Mesa DRI Intel HD Graphics 4000 (IVB GT2) 
  v: 4.2 Mesa 20.0.7 compat-v: 3.0 direct render: Yes 
Audio:
  Device-1: Intel 7 Series/C216 Family High Definition Audio 
  vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus ID: 00:1b.0 
  chip ID: 8086:1e20 
  Sound Server: ALSA v: k5.7.0-3-MANJARO 
Network:
  Device-1: Ralink RT3290 Wireless 802.11n 1T/1R PCIe 
  vendor: Hewlett-Packard driver: rt2800pci v: 2.3.0 port: 4040 
  bus ID: 01:00.0 chip ID: 1814:3290 
  IF: wlo1 state: up mac: <filter> 
  Device-2: Realtek RTL810xE PCI Express Fast Ethernet 
  vendor: Hewlett-Packard driver: r8169 v: kernel port: 2000 bus ID: 08:00.0 
  chip ID: 10ec:8136 
  IF: enp8s0 state: down mac: <filter> 
Drives:
  Local Storage: total: 465.76 GiB used: 336.01 GiB (72.1%) 
  ID-1: /dev/sda vendor: HGST (Hitachi) model: HTS545050A7E680 
  size: 465.76 GiB block size: physical: 4096 B logical: 512 B 
  speed: 6.0 Gb/s rotation: 5400 rpm serial: <filter> rev: AH10 scheme: GPT 
Partition:
  ID-1: / raw size: 58.50 GiB size: 57.33 GiB (98.00%) 
  used: 35.40 GiB (61.8%) fs: ext4 dev: /dev/sda8 
  ID-2: swap-1 size: 1024.0 MiB used: 18.5 MiB (1.8%) fs: swap 
  swappiness: 60 (default) cache pressure: 100 (default) dev: /dev/sda7 
Sensors:
  System Temperatures: cpu: 55.0 C mobo: N/A 
  Fan Speeds (RPM): N/A 
Info:
  Processes: 205 Uptime: 7h 02m Memory: 3.74 GiB used: 1.72 GiB (45.9%) 
  Init: systemd v: 245 Compilers: gcc: 10.1.0 Shell: bash v: 5.0.17 
  running in: xfce4-terminal inxi: 3.0.37 

I meant I used to throw wifi hotspot in windows 10 and it would result upto same speed as my isp subscription but in manjaro distro it is only showing about 100kbps speed in wifi hospot.

Yes it is listed in lspci and it is my default wifi adapter.

Yes I mean wifi hotspot so I can share my laptop's internet (Ethernet) connection in my room to use internet from mobile and other devices. No, I am not trying to get my Ralink wifi adapter working rather it's working fine but shared internet speed through wifi hotspot is incredibly slow.

Ralink is my default wifi adapter and I am using it.

I guess if the situation is satisfying in windows then should I update bios?
Isn't there high risk in updating bios?

There is no need to update your bios if your internal wifi adapter's speed is satisfactory. If you cannot get full speed out of your internal Ralink wifi adapter (using Linux) then a bios update would be a good idea.

I would not say a bios update is dangerous (if done correctly), but it must be done properly or it could result in serious problems. If you have a dual boot with Windows, a bios update should be very easy. A bios update through Linux is definitely more complicated.

  1. Are you dual booting?

  2. How are you measuring your speed?

  3. Have you ever installed any other Linux distro before? If so, which distro's and what were your speeds like?

  4. Kernel 5.7 is still experimental. Have you tested other kernels? If you have tested other kernels, which kernels have you tested?

  5. Have you tested any other Manjaro DE's from a live boot disk? I would highly suggest testing other DE's from live boot media and testing your speed. Test some other live boot disks from another distro such as Ubuntu and report your speeds off of other live boot disks.

  6. Have you tested disabling the power saving options as I instructed in the link I gave? Any changes are easily reversible if they do not result in improvement. If you have not tested the troubleshooting steps I gave regarding powersaving, then I'm wondering why you haven't. If you did test the changes then I'm wondering why you haven't reported on it. Remote troubleshooting is very difficult if you do not report on all troubleshooting steps. Please report on this troubleshooting step.

  7. Please explain in detail how you are attempting to share your internet connection. Are you trying to share your Ethernet connection through your wifi? Your Ethernet connection is listed as being down in your inxi output, so I am confused as to your setup. Please explain how you are trying to create a hotspot.

Please read these links:

https://wiki.archlinux.org/index.php/software_access_point

https://archived.forum.manjaro.org/search?context=topic&context_id=65326&q=Hotspot%20create_ap&skip_context=true

Your wifi adapter must fully support acting as an AP in Linux for use as a hotspot. You can install the nm-connection-editor package if it is not already installed. Run it, use a + icon on bottom left to add a new network of type "WiFi", and then, while configuring it, set "Client" mode to "Hotspot".

Yes I am dual booting windows 10 and Manjaro Gnome. Right now I am using kernel linux414.

Yes I am measuring my internet speed.

Yes I have installed other linux distros before a year. I remember using ubuntu I don't know which version was it but it's wifi hotspot speed was actually good.

I have experimented with kernel linux56, linux54, linux 414 and I don't see any improvements in wifi hotspot speed.

I am sharing my ethernet connection through wifi. I am using turn on wifi hotspot option from wifi in settings.

Don't worry about that. At that specific time I was using wifi.

Unfortunately I am not able to live boot currently because I don't have any pendrive with me.

Yes I tried this option but no improvements.

Yes I did this too. But the case is same.

You will need to configure wifi sharing yourself if you have not already done so. I already gave you links for configuring your hotspot yourself. You will need to read the information and configure the hotspot yourself.

Here is a another recent thread regarding setting up an AP that you may want to keep your eye on for information.

Prior links I've already pozted:

https://wiki.archlinux.org/index.php/software_access_point

https://archived.forum.manjaro.org/search?context=topic&context_id=65326&q=Hotspot%20create_ap&skip_context=true

I just noticed the Manjaro Gnome part of this response. Did you do a separate install on completely different partitions for your Manjaro KDE install. Or, did you simply install Gnome and KDE desktops together?

In one computer I have dual booted windows and gnome and in another computer I have dual booted windows and kde. Actually one is my computer and another is my brother's. We do have exactly same HP notebook15 pc.

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.

Forum kindly sponsored by