Yes, I've tried switching channels on the mouse. I get the same result.
you could try to look at the journal
journalctl -b -p err
Maybe there is something usefull in it.
Please post:
inxi -Fxxxz
Knowing if you're using a combo wifi/bluerooth chip would be helpful. We need to know which modules you are using as well.
I looked at the journal and there could be an issue there. That BIOS Error doesn't look too good? I'm using a Dell Laptop so I'll look to see if there is a BIOS update available.
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20180810/psargs-330)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.FN00._ON, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20180810/psargs-330)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.FN00._ON, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: acpi PNP0C0B:00: Failed to set initial power state
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20180810/psargs-330)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.FN01._ON, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20180810/psargs-330)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.FN01._ON, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: acpi PNP0C0B:01: Failed to set initial power state
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20180810/psargs-330)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.FN02._ON, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20180810/psargs-330)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.FN02._ON, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: acpi PNP0C0B:02: Failed to set initial power state
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20180810/psargs-330)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.FN03._ON, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20180810/psargs-330)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.FN03._ON, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: acpi PNP0C0B:03: Failed to set initial power state
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20180810/psargs-330)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.FN04._ON, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20180810/psargs-330)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.FN04._ON, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: acpi PNP0C0B:04: Failed to set initial power state
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20180810/psargs-330)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.TZ00._TMP, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20180810/psargs-330)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.TZ00._TMP, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20180810/psargs-330)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.TZ01._TMP, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECAV], AE_NOT_FOUND (20180810/psargs-330)
nov 17 19:51:27 GBGCON-SILSAB kernel: ACPI Error: Method parse/execution failed \_TZ.TZ01._TMP, AE_NOT_FOUND (20180810/psparse-516)
nov 17 19:51:28 GBGCON-SILSAB kernel: brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
nov 17 19:51:28 GBGCON-SILSAB kernel: brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
nov 17 19:51:28 GBGCON-SILSAB kernel: brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
nov 17 19:51:28 GBGCON-SILSAB kernel: brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43602/1 wl0: Nov 10 2015 06:38:10 version 7.35.177.61 (r598657) FWID 01-ea662a8c
nov 17 19:51:29 GBGCON-SILSAB kernel: psmouse serio1: synaptics: Unable to query device: -5
nov 17 19:51:40 GBGCON-SILSAB kernel: brcmfmac: brcmf_inetaddr_changed: fail to get arp ip table err:-52
nov 17 19:51:52 GBGCON-SILSAB bluetoothd[458]: RFCOMM server failed for Headset Voice gateway: rfcomm_bind: Address already in use (98)
nov 17 19:51:52 GBGCON-SILSAB bluetoothd[458]: RFCOMM server failed for :1.145/Profile/HSPHSProfile/00001108-0000-1000-8000-00805f9b34fb: rfcomm_bind: Address alread>
nov 17 19:52:31 GBGCON-SILSAB kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
nov 17 19:52:48 GBGCON-SILSAB kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
nov 17 19:53:04 GBGCON-SILSAB kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
nov 17 19:53:16 GBGCON-SILSAB kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
nov 17 19:54:16 GBGCON-SILSAB kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
nov 17 19:54:33 GBGCON-SILSAB kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
nov 17 19:54:49 GBGCON-SILSAB kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
nov 17 19:55:05 GBGCON-SILSAB kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
nov 17 19:55:21 GBGCON-SILSAB kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
nov 17 19:55:48 GBGCON-SILSAB kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
nov 17 19:57:02 GBGCON-SILSAB kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
nov 17 19:57:18 GBGCON-SILSAB kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
nov 17 19:59:45 GBGCON-SILSAB kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
nov 17 20:00:01 GBGCON-SILSAB kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
Yes it's a bluetooth/wifi combo.
This is the result from inxi -Fxxxz:
System:
Host: GBGCON-SILSAB Kernel: 4.19.2-1-MANJARO x86_64 bits: 64 compiler: gcc
v: 8.2.1 Desktop: Gnome 3.30.1 wm: gnome-shell dm: GDM 3.30.2
Distro: Manjaro Linux
Machine:
Type: Laptop System: Dell product: XPS 15 9550 v: N/A serial: <filter> Chassis:
type: 9 serial: <filter>
Mobo: Dell model: 0N7TVV v: A00 serial: <filter> UEFI: Dell v: 1.9.0
date: 10/11/2018
Battery:
ID-1: BAT0 charge: 73.3 Wh condition: 73.3/84.0 Wh (87%) volts: 13.0/11.4
model: SMP DELL 1P6KD54 type: Li-poly serial: <filter> status: Full
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse MX Master
serial: <filter> charge: 50% (should be ignored) rechargeable: yes
status: Charging
CPU:
Topology: Quad Core model: Intel Core i7-6700HQ bits: 64 type: MT MCP
arch: Skylake-S rev: 3 L2 cache: 6144 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 41488
Speed: 800 MHz min/max: 800/3500 MHz Core speeds (MHz): 1: 800 2: 800 3: 800
4: 800 5: 800 6: 800 7: 800 8: 800
Graphics:
Device-1: Intel HD Graphics 530 vendor: Dell driver: i915 v: kernel
bus ID: 00:02.0 chip ID: 8086:191b
Device-2: NVIDIA GM107M [GeForce GTX 960M] driver: N/A bus ID: 01:00.0
chip ID: 10de:139b
Display: x11 server: X.org 1.20.3 driver: N/A compositor: gnome-shell
resolution: <xdpyinfo missing>
OpenGL: renderer: Mesa DRI Intel HD Graphics 530 (Skylake GT2)
v: 4.5 Mesa 18.2.5 compat-v: 3.0 direct render: Yes
Audio:
Device-1: Intel Sunrise Point-H HD Audio vendor: Dell driver: snd_hda_intel
v: kernel bus ID: 00:1f.3 chip ID: 8086:a170
Sound Server: ALSA v: k4.19.2-1-MANJARO
Network:
Device-1: Broadcom Limited BCM43602 802.11ac Wireless LAN SoC vendor: Dell
driver: brcmfmac v: kernel port: f040 bus ID: 02:00.0 chip ID: 14e4:43ba
IF: wlp2s0 state: up mac: <filter>
Drives:
Local Storage: total: 476.94 GiB used: 21.98 GiB (4.6%)
ID-1: /dev/nvme0n1 vendor: Samsung model: PM951 NVMe 512GB size: 476.94 GiB
speed: 31.6 Gb/s lanes: 4 serial: <filter> rev: BXV77D0Q scheme: GPT
Partition:
ID-1: / size: 46.68 GiB used: 16.83 GiB (36.0%) fs: ext4 dev: /dev/nvme0n1p6
ID-2: /home size: 164.82 GiB used: 5.08 GiB (3.1%) fs: ext4 dev: /dev/nvme0n1p7
Sensors:
System Temperatures: cpu: 38.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 280 Uptime: 13m Memory: 15.53 GiB used: 1.82 GiB (11.7%)
Init: systemd v: 239 Compilers: gcc: 8.2.1 Shell: bash v: 4.4.23
running in: tilix inxi: 3.0.27
Should I install broadcom-wl-dkms package then? There is also a kernel specific one (linux419-broadcom-wl).
I find dkms are more dependable when the kernel changes, so yes I would go with the DKMS version.
I have the following firmware packages installed:
alsa-firmware
b43-fwcutter
manjaro-firmware
linux-firmware
ipw2100-fw
ipw2200-fw
Which ones should I remove? I'm thinking b43-fwcutter but should I also remove manjaro-firmware and/or linux-firmware?
Removing b43-fwcutter would be a good idea. I'd wait on removing more.
If you aren't having any luck with kernel 4.19, install 4.14 and the linux414-headers as well.
I'm not having much luck following your guide. Blacklisting the drivers in that list disables the wifi completely leaving it without any driver.
This is what it looks like:
Network:
Device-1: Broadcom Limited BCM43602 802.11ac Wireless LAN SoC vendor: Dell
driver: N/A port: f040 bus ID: 02:00.0 chip ID: 14e4:43ba
Do you think trying with the 4.14 kernel will work better?
No luck with 4.14 either
Did you install the linux414-headers and the linux419 headers.
Please post the output of tbe following command:
hwinfo --netcard --wlan --bluetooth | grep -Ei "model\:|driver\:|status\:|cmd\:|file\:|detected\:" | grep -v "Config Status"
Yes. The headers and dkms.
As soon as I blacklist brcmfmac wifi stops working and no driver appears when I run inxi.
Post these commands please:
uname -r
dkms status
pacman -Qsq linux | grep linux | grep -v -E '(arch|util|sys|api|nvidia|firmware)'
hwinfo --netcard --wlan --bluetooth | grep -Ei "model\:|driver\:|status\:|cmd\:|file\:|detected\:" | grep -v "Config Status"
[silsab@GBGCON-SILSAB ~]$ uname -r
4.19.2-1-MANJARO
[silsab@GBGCON-SILSAB ~]$ dkms status
broadcom-wl, 6.30.223.271, 4.14.81-1-MANJARO, x86_64: installed
broadcom-wl, 6.30.223.271, 4.19.2-1-MANJARO, x86_64: installed
[silsab@GBGCON-SILSAB ~]$ pacman -Qsq linux | grep linux | grep -v -E '(arch|util|sys|api|nvidia|firmware)'
linux414
linux414-bbswitch
linux414-headers
linux419
linux419-bbswitch
linux419-headers
[silsab@GBGCON-SILSAB ~]$ hwinfo --netcard --wlan --bluetooth | grep -Ei "model\:|driver\:|status\:|cmd\:|file\:|detected\:" | grep -v "Config Status"
Model: "Broadcom BCM43602 802.11ac Wireless LAN SoC"
Driver Status: brcmfmac is not active
Driver Activation Cmd: "modprobe brcmfmac"
Driver Status: wl is active
Driver Activation Cmd: "modprobe wl"
I can get WiFi running again after a boot by running "modprobe brcmfmac" that gives following output with hwinfo:
Model: "Broadcom BCM43602 802.11ac Wireless LAN SoC"
Driver: "brcmfmac"
Device File: wlp2s0
Link detected: yes
Driver Status: brcmfmac is active
Driver Activation Cmd: "modprobe brcmfmac"
Driver Status: wl is active
Driver Activation Cmd: "modprobe wl"
But that doesn't change anything about the Bluetooth situation.
There is no difference when booting into the 4.14 kernel but here are the outputs from running the commands:
[silsab@GBGCON-SILSAB ~]$ uname -r
4.14.81-1-MANJARO
[silsab@GBGCON-SILSAB ~]$ dkms status
broadcom-wl, 6.30.223.271, 4.14.81-1-MANJARO, x86_64: installed
broadcom-wl, 6.30.223.271, 4.19.2-1-MANJARO, x86_64: installed
[silsab@GBGCON-SILSAB ~]$ pacman -Qsq linux | grep linux | grep -v -E '(arch|util|sys|api|nvidia|firmware)'
linux414
linux414-bbswitch
linux414-headers
linux419
linux419-bbswitch
linux419-headers
[silsab@GBGCON-SILSAB ~]$ hwinfo --netcard --wlan --bluetooth | grep -Ei "model\:|driver\:|status\:|cmd\:|file\:|detected\:" | grep -v "Config Status"
Model: "Broadcom BCM43602 802.11ac Wireless LAN SoC"
Driver Status: brcmfmac is not active
Driver Activation Cmd: "modprobe brcmfmac"
Driver Status: wl is active
Driver Activation Cmd: "modprobe wl"
Are you connecting via 5G to your router. Using 2.4 Ghz with the combo chips can greatly interfere with bluetooth operation.
The Arch wiki has some parts that might be helpful:
The troubleshooting section:
https://wiki.archlinux.org/index.php/Bluetooth#Troubleshooting
Also, the ArchWiki page specifically covering bluetooth mice:
https://wiki.archlinux.org/index.php/Bluetooth_mouse
If you don't mind trying again, could you reboot and start up with the wl driver loaded.
Once you have rebooted could you please post the full output of:
lsmod
sudo systemctl status bluetooth
journalctl | grep -i bluetooth
dmesg | grep -i bluetooth
[silsab@GBGCON-SILSAB ~]$ lsmod
Module Size Used by
uhid 20480 1
algif_hash 16384 1
algif_skcipher 16384 1
af_alg 28672 6 algif_hash,algif_skcipher
cmac 16384 3
rfcomm 86016 16
fuse 118784 5
snd_hda_codec_hdmi 57344 1
snd_hda_codec_realtek 110592 1
snd_hda_codec_generic 86016 1 snd_hda_codec_realtek
bnep 24576 2
bbswitch 16384 0
uvcvideo 118784 0
btusb 53248 0
videobuf2_vmalloc 16384 1 uvcvideo
videobuf2_memops 16384 1 videobuf2_vmalloc
btrtl 16384 1 btusb
videobuf2_v4l2 28672 1 uvcvideo
btbcm 16384 1 btusb
btintel 24576 1 btusb
videobuf2_common 53248 2 videobuf2_v4l2,uvcvideo
bluetooth 655360 43 btrtl,btintel,btbcm,bnep,btusb,rfcomm
i915 2097152 19
videodev 217088 3 videobuf2_v4l2,uvcvideo,videobuf2_common
joydev 24576 0
ecdh_generic 24576 2 bluetooth
media 45056 2 videodev,uvcvideo
mousedev 24576 0
intel_rapl 24576 0
x86_pkg_temp_thermal 16384 0
intel_powerclamp 16384 0
coretemp 16384 0
kvm_intel 245760 0
kvmgt 28672 0
vfio_mdev 16384 0
mdev 20480 2 kvmgt,vfio_mdev
vfio_iommu_type1 28672 0
crct10dif_pclmul 16384 0
crc32_pclmul 16384 0
vfio 32768 3 kvmgt,vfio_mdev,vfio_iommu_type1
ghash_clmulni_intel 16384 0
usbhid 57344 0
hid_multitouch 28672 0
pcbc 16384 0
hid_generic 16384 0
kvm 737280 2 kvmgt,kvm_intel
iTCO_wdt 16384 0
iTCO_vendor_support 16384 1 iTCO_wdt
nls_iso8859_1 16384 1
nls_cp437 20480 1
vfat 24576 1
fat 81920 1 vfat
mei_wdt 16384 0
snd_hda_intel 45056 6
dell_wmi 16384 0
wmi_bmof 16384 0
intel_wmi_thunderbolt 16384 0
mxm_wmi 16384 0
snd_hda_codec 151552 4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
wl 6463488 0
aesni_intel 200704 5
dell_laptop 24576 1
aes_x86_64 20480 1 aesni_intel
snd_hda_core 94208 5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
dell_smbios 28672 2 dell_wmi,dell_laptop
crypto_simd 16384 1 aesni_intel
cryptd 28672 4 crypto_simd,ghash_clmulni_intel,aesni_intel
glue_helper 16384 1 aesni_intel
dell_wmi_descriptor 16384 2 dell_wmi,dell_smbios
snd_hwdep 16384 1 snd_hda_codec
irqbypass 16384 1 kvm
i2c_algo_bit 16384 1 i915
dcdbas 16384 1 dell_smbios
snd_pcm 131072 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core
drm_kms_helper 208896 1 i915
intel_cstate 16384 0
snd_timer 36864 1 snd_pcm
intel_uncore 135168 0
cfg80211 778240 1 wl
intel_rapl_perf 16384 0
psmouse 172032 0
drm 495616 7 drm_kms_helper,i915
input_leds 16384 0
pcspkr 16384 0
i2c_i801 32768 0
snd 98304 20 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm
tpm_tis 16384 0
tpm_tis_core 20480 1 tpm_tis
soundcore 16384 1 snd
tpm 65536 2 tpm_tis,tpm_tis_core
rtsx_pci_ms 20480 0
i2c_hid 28672 0
intel_hid 16384 0
rfkill 28672 7 bluetooth,dell_laptop,cfg80211
memstick 16384 1 rtsx_pci_ms
intel_gtt 24576 1 i915
hid 139264 5 i2c_hid,usbhid,hid_multitouch,hid_generic,uhid
rng_core 16384 1 tpm
sparse_keymap 16384 2 intel_hid,dell_wmi
int3403_thermal 16384 0
agpgart 49152 2 intel_gtt,drm
mei_me 45056 1
syscopyarea 16384 1 drm_kms_helper
processor_thermal_device 16384 0
sysfillrect 16384 1 drm_kms_helper
wmi 28672 6 intel_wmi_thunderbolt,dell_wmi,wmi_bmof,dell_smbios,dell_wmi_descriptor,mxm_wmi
idma64 20480 0
int3402_thermal 16384 0
sysimgblt 16384 1 drm_kms_helper
int3400_thermal 16384 0
mei 114688 3 mei_wdt,mei_me
fb_sys_fops 16384 1 drm_kms_helper
int340x_thermal_zone 16384 3 int3403_thermal,int3402_thermal,processor_thermal_device
acpi_thermal_rel 16384 1 int3400_thermal
intel_soc_dts_iosf 16384 1 processor_thermal_device
intel_pch_thermal 16384 0
evdev 24576 32
intel_lpss_pci 20480 0
ac 16384 0
battery 24576 0
pcc_cpufreq 16384 0
intel_lpss 16384 1 intel_lpss_pci
mac_hid 16384 0
uinput 20480 0
crypto_user 16384 0
ip_tables 28672 0
x_tables 45056 1 ip_tables
ext4 733184 2
crc32c_generic 16384 0
crc16 16384 2 bluetooth,ext4
mbcache 16384 1 ext4
jbd2 126976 1 ext4
fscrypto 32768 1 ext4
rtsx_pci_sdmmc 28672 0
mmc_core 176128 1 rtsx_pci_sdmmc
serio_raw 16384 0
ahci 40960 0
atkbd 32768 0
libps2 16384 2 atkbd,psmouse
libahci 40960 1 ahci
libata 278528 2 libahci,ahci
xhci_pci 16384 0
crc32c_intel 24576 4
scsi_mod 253952 1 libata
xhci_hcd 262144 1 xhci_pci
rtsx_pci 73728 2 rtsx_pci_sdmmc,rtsx_pci_ms
i8042 32768 1 dell_laptop
serio 28672 6 serio_raw,atkbd,psmouse,i8042
[silsab@GBGCON-SILSAB ~]$ sudo systemctl status bluetooth
● bluetooth.service - Bluetooth service
Loaded: loaded (/usr/lib/systemd/system/bluetooth.service; enabled; vendor preset>
Active: active (running) since Sat 2018-11-17 23:34:58 CET; 2min 36s ago
Docs: man:bluetoothd(8)
Main PID: 454 (bluetoothd)
Status: "Running"
Tasks: 1 (limit: 4915)
Memory: 4.4M
CGroup: /system.slice/bluetooth.service
└─454 /usr/lib/bluetooth/bluetoothd
nov 17 23:34:58 GBGCON-SILSAB bluetoothd[454]: Bluetooth daemon 5.50
nov 17 23:34:58 GBGCON-SILSAB systemd[1]: Started Bluetooth service.
nov 17 23:34:58 GBGCON-SILSAB bluetoothd[454]: Starting SDP server
nov 17 23:34:58 GBGCON-SILSAB bluetoothd[454]: Bluetooth management interface 1.14 i>
nov 17 23:35:01 GBGCON-SILSAB bluetoothd[454]: Endpoint registered: sender=:1.67 pat>
nov 17 23:35:01 GBGCON-SILSAB bluetoothd[454]: Endpoint registered: sender=:1.67 pat>
nov 17 23:35:12 GBGCON-SILSAB bluetoothd[454]: Endpoint registered: sender=:1.140 pa>
nov 17 23:35:12 GBGCON-SILSAB bluetoothd[454]: Endpoint registered: sender=:1.140 pa>
nov 17 23:35:12 GBGCON-SILSAB bluetoothd[454]: RFCOMM server failed for Headset Voic>
nov 17 23:35:12 GBGCON-SILSAB bluetoothd[454]: RFCOMM server failed for :1.140/Profi>
[silsab@GBGCON-SILSAB ~]$