No, your system is in operational state. It can be fixed if a fix is availabe - if the drivers will work. If you reinstall you get the same state after an update.
However it is possible that the driver won't work anymore on Manjaro. Then I know that xf86-video-openchrome works fine on antiX Linux, because I helped testing it.
Frankly, I thought so too.
Running pacman -Qe shows me xorg-server 1.19.6-2.1
My mistake. xf86-video-openchrome needs xorg 1.20. You can upgrade it then for the test with video-openchrome and later downgrade it to get back to video-vesa. (openchrome is superior to vesa if it works.)
I now booted to manjaro32 and can better check your error messages.
Ok, I have upgraded to xorg 1.20 again. What command to I use to install video-openchrome? The same you mentioned before mhdw -i pci video-openchrome ?
exactly
I get: >Successfully installed video-openchrome
But after exit and reboot we still have a black screen ...
Have you applied modprobe.blacklist=viafb?
If that doesn't help, chroot from live USB again and
mhwd -i pci video-vesa
downgrade xorg-server xorg-server-common xf86-video-vesa to 1.19 and compativle vesa.
Ha, with modprobe.blacklist=viafb I for the first time see the GUI login screen! However, when attempting to login, it briefly flashes the cute Xfce mouse logo before returning to the login screen again.
So, I boot into live session again and chroot, but when mhdw -i pci video-vesa, it returns bash: mhdw: command not found
Can you first upload /var/log/Xorg.0.log from the disk, please! I would like to see what errors openchrome has.
It was a typo, mhdw is wrong, mhwd is correct.
Xorg.0.log, a 657 line beauty, here she is:
[ 25.149]
X.Org X Server 1.20.0
X Protocol Version 11, Revision 0
[ 25.150] Build Operating System: Linux Arch Linux
[ 25.150] Current Operating System: Linux manjaro 4.4.132-1-MANJARO #1 SMP PREEMPT Mon May 21 11:34:47 UTC 2018 i686
[ 25.150] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4-i686 root=UUID=1f796b68-e11a-4aa0-865e-c5d12e06e393 rw modproe.blacklist=viafb
[ 25.150] Build Date: 18 May 2018 05:24:39PM
[ 25.150]
[ 25.150] Current version of pixman: 0.34.0
[ 25.150] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 25.150] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 25.150] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 25 17:03:25 2018
[ 25.256] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 25.256] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 25.368] (==) No Layout section. Using the first Screen section.
[ 25.369] (==) No screen section available. Using defaults.
[ 25.369] (**) |-->Screen "Default Screen Section" (0)
[ 25.369] (**) | |-->Monitor "<default monitor>"
[ 25.370] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 25.370] (**) | |-->Device "Device0"
[ 25.370] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 25.370] (==) Automatically adding devices
[ 25.370] (==) Automatically enabling devices
[ 25.370] (==) Automatically adding GPU devices
[ 25.370] (==) Automatically binding GPU devices
[ 25.370] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 25.400] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[ 25.400] Entry deleted from font path.
[ 25.400] (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[ 25.401] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[ 25.401] Entry deleted from font path.
[ 25.401] (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[ 25.401] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1
[ 25.401] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 25.401] (WW) Ignoring unrecognized extension "Composite"
[ 25.401] (**) Extension "RENDER" is enabled
[ 25.402] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 25.402] (II) Module ABI versions:
[ 25.402] X.Org ANSI C Emulation: 0.4
[ 25.402] X.Org Video Driver: 24.0
[ 25.402] X.Org XInput driver : 24.1
[ 25.402] X.Org Server Extension : 10.0
[ 25.405] (++) using VT number 1
[ 25.406] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 25.416] (--) PCI:*(1@0:0:0) 1106:3118:1734:1078 rev 2, Mem @ 0xf0000000/67108864, 0xd1000000/16777216
[ 25.416] (II) LoadModule: "glx"
[ 25.525] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 26.530] (II) Module glx: vendor="X.Org Foundation"
[ 26.530] compiled for 1.20.0, module version = 1.0.0
[ 26.530] ABI class: X.Org Server Extension, version 10.0
[ 26.530] (II) LoadModule: "openchrome"
[ 26.799] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
[ 26.825] (II) Module openchrome: vendor="https://www.freedesktop.org/wiki/Openchrome/"
[ 26.826] compiled for 1.20.0, module version = 0.6.0
[ 26.826] Module class: X.Org Video Driver
[ 26.826] ABI class: X.Org Video Driver, version 24.0
[ 26.826] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266,
KM400 / KM400A / KN400 / P4M800, K8M800 / K8N800,
PM800 / PN800 / PM880 / CN333 / CN400, P4M800 Pro / VN800 / CN700,
CX700 / VX700, P4M890 / VN890 / CN800, K8M890 / K8N890,
P4M900 / VN896 / CN896, VX800 / VX820, VX855 / VX875, VX900
[ 26.826] (!!) VIA Technologies does not support this driver in any way.
[ 26.826] (!!) For support, please refer to https://www.freedesktop.org/wiki/Openchrome/.
[ 26.826] (!!) (openchrome 0.6.0 release)
[ 26.826] (II) CHROME(0): viaPreInit
[ 26.827] (II) CHROME(0): VIAGetRec
[ 26.827] (--) CHROME(0): Chipset: PM800 / PN800 / PM880 / CN333 / CN400
[ 26.827] (--) CHROME(0): Chipset revision: 0
[ 27.378] (EE) CHROME(0): [drm] Failed to open DRM device for pci:0000:01:00.0: No such file or directory
[ 27.404] (II) Loading sub module "vgahw"
[ 27.404] (II) LoadModule: "vgahw"
[ 27.405] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 27.412] (II) Module vgahw: vendor="X.Org Foundation"
[ 27.412] compiled for 1.20.0, module version = 0.1.0
[ 27.412] ABI class: X.Org Video Driver, version 24.0
[ 27.412] (--) CHROME(0): Probed amount of VideoRAM = 65536 kB
[ 27.412] (II) CHROME(0): Entered viaMapMMIO.
[ 27.412] (--) CHROME(0): Mapping MMIO at address 0xD1000000 with size 52 KB.
[ 27.412] (--) CHROME(0): Mapping 2D Host BitBLT space at address 0xD1200000 with size 2048 KB.
[ 27.412] (--) CHROME(0): Mapping the frame buffer at address 0xF0000000 with size 65536 KB.
[ 27.415] (--) CHROME(0): Frame buffer start address: 0xb24fa000, free start: 0x0 end: 0x4000000
[ 27.415] (II) CHROME(0): Entered viaMMIOEnable.
[ 27.415] (II) CHROME(0): Exiting viaMMIOEnable.
[ 27.415] (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 27.415] (II) CHROME(0): Exiting viaMapMMIO.
[ 27.415] (II) CHROME(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 27.415] (==) CHROME(0): Depth 24, (--) framebuffer bpp 32
[ 27.415] (==) CHROME(0): RGB weight 888
[ 27.415] (==) CHROME(0): Default visual is TrueColor
[ 27.415] (II) CHROME(0): VIASetupDefaultOptions - Setting up default chipset options.
[ 27.415] (==) CHROME(0): Shadow framebuffer is disabled.
[ 27.415] (==) CHROME(0): Hardware acceleration is enabled.
[ 27.415] (==) CHROME(0): Using EXA acceleration architecture.
[ 27.415] (==) CHROME(0): EXA composite acceleration enabled.
[ 27.415] (==) CHROME(0): EXA scratch area size is 4096 kB.
[ 27.415] (==) CHROME(0): Using hardware two-color cursors and software full-color cursors.
[ 27.415] (==) CHROME(0): GPU virtual command queue will be enabled.
[ 27.415] (==) CHROME(0): DRI IRQ will be enabled if DRI is enabled.
[ 27.415] (==) CHROME(0): AGP DMA will be enabled if DRI is enabled.
[ 27.415] (==) CHROME(0): AGP DMA will be used for 2D acceleration.
[ 27.415] (==) CHROME(0): PCI DMA will be used for XV image transfer if DRI is enabled.
[ 27.415] (==) CHROME(0): Xv Bandwidth check is enabled.
[ 27.415] (==) CHROME(0): Will not impose a limit on video RAM reserved for DRI.
[ 27.415] (==) CHROME(0): Will try to allocate 32768 kB of AGP memory.
[ 27.415] (==) CHROME(0): TV dotCrawl is disabled.
[ 27.415] (==) CHROME(0): TV deflicker is set to 0.
[ 27.415] (==) CHROME(0): No default TV type is set.
[ 27.415] (==) CHROME(0): No default TV output signal type is set.
[ 27.415] (==) CHROME(0): Will not print VGA registers.
[ 27.415] (==) CHROME(0): Will not scan I2C buses.
[ 27.415] (II) CHROME(0): Detected MemClk 5
[ 27.415] (II) CHROME(0): ViaGetMemoryBandwidth. Memory type: 5
[ 27.415] (II) CHROME(0): Detected TV standard: PAL.
[ 27.416] (II) Loading sub module "ramdac"
[ 27.416] (II) LoadModule: "ramdac"
[ 27.416] (II) Module "ramdac" already built-in
[ 27.416] (II) Loading sub module "i2c"
[ 27.416] (II) LoadModule: "i2c"
[ 27.416] (II) Module "i2c" already built-in
[ 27.416] (II) CHROME(0): Entered ViaI2CInit.
[ 27.416] (II) CHROME(0): Entered ViaI2CBus1Init.
[ 27.416] (II) CHROME(0): I2C bus "I2C Bus 1" initialized.
[ 27.416] (II) CHROME(0): Exiting ViaI2CBus1Init.
[ 27.416] (II) CHROME(0): Entered ViaI2CBus2Init.
[ 27.416] (II) CHROME(0): I2C bus "I2C Bus 2" initialized.
[ 27.416] (II) CHROME(0): Exiting ViaI2CBus2Init.
[ 27.416] (II) CHROME(0): Entered ViaI2CBus3Init.
[ 27.416] (II) CHROME(0): I2C bus "I2C Bus 3" initialized.
[ 27.416] (II) CHROME(0): Exiting ViaI2CBus3Init.
[ 27.416] (II) CHROME(0): Exiting ViaI2CInit.
[ 27.416] (II) Loading sub module "ddc"
[ 27.416] (II) LoadModule: "ddc"
[ 27.416] (II) Module "ddc" already built-in
[ 27.416] (II) CHROME(0): Entered viaOutputDetect.
[ 27.416] (II) CHROME(0): Entered viaProbePinStrapping.
[ 27.416] (II) CHROME(0): Probing VIA Technologies IGP pin strapping . . .
[ 27.416] (II) CHROME(0): SR12: 0x72
[ 27.416] (II) CHROME(0): SR13: 0x08
[ 27.416] (II) CHROME(0): A TV encoder is detected on DVP0 (Digital Video Port 0).
[ 27.416] (II) CHROME(0): 24-bit FPDP (Flat Panel Display Port) detected.
[ 27.416] (II) CHROME(0): Detected Flat Panel Type from Strapping Pins: 2
[ 27.416] (II) CHROME(0): Exiting viaProbePinStrapping.
[ 27.416] (II) CHROME(0): Entered via_analog_init.
[ 27.416] (II) CHROME(0): Output VGA-1 has no monitor section
[ 27.416] (II) CHROME(0): Exiting via_analog_init.
[ 27.416] (II) CHROME(0): Entered via_tv_init.
[ 27.417] (II) CHROME(0): ViaVT162xDetect
[ 27.417] (II) CHROME(0): I2C device "I2C Bus 2:VT162x" registered at address 0x40.
[ 27.418] (--) CHROME(0): Detected VIA Technologies VT1622A/VT1623 TV Encoder
[ 27.418] (II) CHROME(0): ViaVT162xInit
[ 27.418] (II) CHROME(0): Output TV-1 has no monitor section
[ 27.418] (II) CHROME(0): VT162xSave
[ 27.515] (II) CHROME(0): Exiting via_tv_init.
[ 27.515] (II) CHROME(0): Entered via_dvi_init.
[ 27.515] (II) CHROME(0): Probing I2C Bus 2 for VT1632.
[ 27.515] (II) CHROME(0): Entered viaVT1632Init.
[ 27.516] (--) CHROME(0): I2C device not found.
[ 27.516] (II) CHROME(0): Exiting viaVT1632Init.
[ 27.516] (II) CHROME(0): I2C Bus 2 was not initialized for DVI use.
[ 27.516] (II) CHROME(0): Probing I2C Bus 3 for VT1632.
[ 27.516] (II) CHROME(0): Entered viaVT1632Init.
[ 27.516] (--) CHROME(0): I2C device not found.
[ 27.516] (II) CHROME(0): Exiting viaVT1632Init.
[ 27.516] (II) CHROME(0): I2C Bus 3 was not initialized for DVI use.
[ 27.516] (II) CHROME(0): Probing I2C Bus 2 for SiI 164.
[ 27.516] (II) CHROME(0): Entered viaSiI164Init.
[ 27.516] (--) CHROME(0): I2C device not found.
[ 27.516] (II) CHROME(0): Exiting viaSiI164Init.
[ 27.516] (II) CHROME(0): I2C Bus 2 was not initialized for DVI use.
[ 27.516] (II) CHROME(0): Probing I2C Bus 3 for SiI 164.
[ 27.516] (II) CHROME(0): Entered viaSiI164Init.
[ 27.517] (--) CHROME(0): I2C device not found.
[ 27.517] (II) CHROME(0): Exiting viaSiI164Init.
[ 27.517] (II) CHROME(0): I2C Bus 3 was not initialized for DVI use.
[ 27.517] (II) CHROME(0): Exiting via_dvi_init.
[ 27.517] (==) CHROME(0): LVDS-0 : DVI Center is disabled.
[ 27.517] (II) CHROME(0): Output FP-1 has no monitor section
[ 27.517] (II) CHROME(0): Exiting viaOutputDetect.
[ 27.517] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 1.
[ 27.517] (II) CHROME(0): I2C device "I2C Bus 1:ddc2" registered at address 0xA0.
[ 27.522] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 1.
[ 27.522] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 2.
[ 27.522] (II) CHROME(0): I2C device "I2C Bus 2:ddc2" registered at address 0xA0.
[ 27.525] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 2.
[ 27.525] (--) CHROME(0): Now perform manual detection of a VGA monitor.
[ 27.526] (II) CHROME(0): EDID for output VGA-1
[ 27.526] (II) CHROME(0): VT1622DACSense
[ 27.537] (--) CHROME(0): VT162x: Nothing connected.
[ 27.537] (II) CHROME(0): EDID for output TV-1
[ 27.537] (II) CHROME(0): Entered via_lvds_detect.
[ 27.537] (II) CHROME(0): Entered viaLVDSGetFPInfoFromScratchPad.
[ 27.537] (II) CHROME(0): VIA Technologies VGA BIOS Scratch Pad Register Flat Panel Index: 2
[ 27.537] (II) CHROME(0): Flat Panel Native Resolution: 1024x768
[ 27.537] (II) CHROME(0): Flat Panel Dual Edge Transfer: Off
[ 27.537] (II) CHROME(0): Flat Panel Output Color Dithering: On (18 bit)
[ 27.537] (II) CHROME(0): Exiting viaLVDSGetFPInfoFromScratchPad.
[ 27.537] (II) CHROME(0): Exiting via_lvds_detect.
[ 27.537] (II) CHROME(0): Entered via_lvds_get_modes.
[ 27.537] (II) CHROME(0): Exiting via_lvds_get_modes.
[ 27.537] (II) CHROME(0): Printing probed modes for output FP-1
[ 27.537] (II) CHROME(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz eP)
[ 27.537] (II) CHROME(0): Output VGA-1 disconnected
[ 27.537] (II) CHROME(0): Output TV-1 disconnected
[ 27.537] (II) CHROME(0): Output FP-1 connected
[ 27.537] (II) CHROME(0): Using exact sizes for initial modes
[ 27.537] (II) CHROME(0): Output FP-1 using initial mode 1024x768 +0+0
[ 27.537] (==) CHROME(0): Using gamma correction (1.0, 1.0, 1.0)
[ 27.537] (==) CHROME(0): DPI set to (96, 96)
[ 27.537] (II) Loading sub module "fb"
[ 27.537] (II) LoadModule: "fb"
[ 27.537] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 27.552] (II) Module fb: vendor="X.Org Foundation"
[ 27.552] compiled for 1.20.0, module version = 1.0.0
[ 27.552] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.552] (II) Loading sub module "exa"
[ 27.552] (II) LoadModule: "exa"
[ 27.552] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 27.570] (II) Module exa: vendor="X.Org Foundation"
[ 27.570] compiled for 1.20.0, module version = 2.6.0
[ 27.570] ABI class: X.Org Video Driver, version 24.0
[ 27.570] (II) CHROME(0): VIAScreenInit
[ 27.570] (II) CHROME(0): Frame Buffer From (0,0) To (1024,16384)
[ 27.570] (II) CHROME(0): Using 15616 lines for offscreen memory.
[ 27.570] 3145728 bytes of Linear memory allocated at 300000, handle 23788144
[ 27.570] (II) CHROME(0): Entered umsAccelInit.
[ 27.570] 262144 bytes of Linear memory allocated at 600000, handle 23788288
[ 27.570] (II) CHROME(0): Initializing the 2D engine.
[ 27.570] (II) CHROME(0): Initializing the 3D engine.
[ 27.570] 32 bytes of Linear memory allocated at 640000, handle 23788432
[ 27.570] 32 bytes of Linear memory allocated at 640080, handle 23788576
[ 27.570] (II) CHROME(0): Exiting umsAccelInit.
[ 27.570] (II) CHROME(0): - Visuals set up
[ 27.570] (II) CHROME(0): - B & W
[ 27.570] (**) CHROME(0): Option "MigrationHeuristic" "greedy"
[ 27.570] (II) EXA(0): Offscreen pixmap area of 63963136 bytes
[ 27.570] (II) EXA(0): Driver registered support for the following operations:
[ 27.570] (II) Solid
[ 27.570] (II) Copy
[ 27.570] (II) Composite (RENDER acceleration)
[ 27.570] (II) CHROME(0): [EXA] Enabled EXA acceleration.
[ 27.570] (==) CHROME(0): Backing store enabled
[ 27.570] (II) CHROME(0): - Backing store set up
[ 27.570] (II) CHROME(0): - SW cursor set up
[ 27.570] (II) CHROME(0): HWCursor ARGB enabled
[ 27.570] 16384 bytes of Linear memory allocated at 641000, handle 23788960
[ 27.571] 16384 bytes of Linear memory allocated at 645000, handle 23788672
[ 27.571] (II) CHROME(0): - Def Color map set up
[ 27.571] (II) CHROME(0): - Palette loaded
[ 27.571] (II) CHROME(0): - Color maps etc. set up
[ 27.571] (==) CHROME(0): DPMS enabled
[ 27.571] (II) CHROME(0): - DPMS set up
[ 27.571] (II) CHROME(0): VIAEnterVT
[ 27.571] (II) CHROME(0): Entered viaIGA1Save.
[ 27.572] (II) CHROME(0): Saving sequencer registers.
[ 27.572] (II) CHROME(0): Finished saving sequencer registers.
[ 27.572] (II) CHROME(0): Saving IGA1 registers.
[ 27.572] (II) CHROME(0): Finished saving IGA1 registers.
[ 27.572] (II) CHROME(0): Exiting viaIGA1Save.
[ 27.572] (II) CHROME(0): Entered iga2_crtc_save.
[ 27.572] (II) CHROME(0): Entered viaIGA2Save.
[ 27.572] (II) CHROME(0): Saving IGA2 registers.
[ 27.572] (II) CHROME(0): Finished saving IGA2 registers.
[ 27.572] (II) CHROME(0): Exiting viaIGA2Save.
[ 27.572] (II) CHROME(0): Exiting iga2_crtc_save.
[ 27.572] (II) CHROME(0): VT162xSave
[ 27.803] (II) CHROME(0): Entered via_analog_dpms.
[ 27.803] (II) CHROME(0): Entered viaAnalogOutput.
[ 27.803] (II) CHROME(0): Analog VGA Output: Off
[ 27.803] (II) CHROME(0): Exiting viaAnalogOutput.
[ 27.803] (II) CHROME(0): Exiting via_analog_dpms.
[ 27.803] (II) CHROME(0): ViaTVPower: Off.
[ 27.803] (II) CHROME(0): VT1622Power
[ 27.805] (II) CHROME(0): Entered ViaLVDSPower.
[ 27.805] (II) CHROME(0): Integrated LVDS Flat Panel Power: Off
[ 27.805] (II) CHROME(0): Exiting ViaLVDSPower.
[ 27.805] (II) CHROME(0): Entered viaFPIOPadSetting.
[ 27.805] (II) CHROME(0): SR12: 0x72
[ 27.805] (II) CHROME(0): SR13: 0x08
[ 27.805] (II) CHROME(0): Exiting viaFPIOPadSetting.
[ 27.805] (II) CHROME(0): Entered iga1_crtc_dpms.
[ 27.805] (II) CHROME(0): Entered viaIGA1DPMSControl.
[ 27.805] (II) CHROME(0): Exiting viaIGA1DPMSControl.
[ 27.805] (II) CHROME(0): Exiting iga1_crtc_dpms.
[ 27.805] (II) CHROME(0): Entered iga2_crtc_dpms.
[ 27.805] (II) CHROME(0): Entered viaIGA2DisplayOutput.
[ 27.805] (II) CHROME(0): IGA2 Display Output: Off
[ 27.805] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
[ 27.805] (II) CHROME(0): Exiting iga2_crtc_dpms.
[ 27.805] (II) CHROME(0): Entered viaIGA2ModeValid.
[ 27.805] (II) CHROME(0): Exiting viaIGA2ModeValid.
[ 27.805] (II) CHROME(0): Entered ViaLVDSPower.
[ 27.805] (II) CHROME(0): Integrated LVDS Flat Panel Power: Off
[ 27.805] (II) CHROME(0): Exiting ViaLVDSPower.
[ 27.806] (II) CHROME(0): Entered viaFPIOPadSetting.
[ 27.806] (II) CHROME(0): SR12: 0x72
[ 27.806] (II) CHROME(0): SR13: 0x08
[ 27.806] (II) CHROME(0): Exiting viaFPIOPadSetting.
[ 27.806] (II) CHROME(0): Entered viaFPIOPadSetting.
[ 27.806] (II) CHROME(0): SR12: 0x72
[ 27.806] (II) CHROME(0): SR13: 0x08
[ 27.806] (II) CHROME(0): Exiting viaFPIOPadSetting.
[ 27.806] (II) CHROME(0): Entered iga2_crtc_prepare.
[ 27.806] (II) CHROME(0): Entered viaIGA2DisplayOutput.
[ 27.806] (II) CHROME(0): IGA2 Display Output: Off
[ 27.806] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
[ 27.806] (II) CHROME(0): Exiting iga2_crtc_prepare.
[ 27.806] (II) CHROME(0): Entered iga2_crtc_mode_set.
[ 27.806] (II) CHROME(0): Entered viaIGA2HWReset.
[ 27.806] (II) CHROME(0): IGA2 HW Reset: On
[ 27.806] (II) CHROME(0): Exiting viaIGA2HWReset.
[ 27.806] (II) CHROME(0): Entered viaIGA2DisplayChannel.
[ 27.806] (II) CHROME(0): IGA2 Display Channel: Off
[ 27.806] (II) CHROME(0): Exiting viaIGA2DisplayChannel.
[ 27.806] (II) CHROME(0): Entered viaIGAInitCommon.
[ 27.806] (II) CHROME(0): Enable Register: 0x01
[ 27.806] (II) CHROME(0): Misc. Register: 0xCF
[ 27.806] (II) CHROME(0): Enable Register: 0x01
[ 27.806] (II) CHROME(0): Misc. Register: 0xEF
[ 27.806] (II) CHROME(0): SR15: 0xAE
[ 27.806] (II) CHROME(0): SR19: 0x7F
[ 27.806] (II) CHROME(0): SR1A: 0x48
[ 27.806] (II) CHROME(0): SR1E: 0x01
[ 27.806] (II) CHROME(0): SR2D: 0xAA
[ 27.806] (II) CHROME(0): SR2E: 0xFF
[ 27.806] (II) CHROME(0): SR3F: 0xFF
[ 27.806] (II) CHROME(0): CR36: 0x31
[ 27.806] (II) CHROME(0): CR3B: 0x03
[ 27.806] (II) CHROME(0): CR3C: 0x08
[ 27.806] (II) CHROME(0): CR3D: 0x54
[ 27.806] (II) CHROME(0): CR3E: 0x70
[ 27.806] (II) CHROME(0): CR3F: 0x02
[ 27.806] (II) CHROME(0): CR47: 0x04
[ 27.806] (II) CHROME(0): CR6B: 0x04
[ 27.806] (II) CHROME(0): Exiting viaIGAInitCommon.
[ 27.806] (II) CHROME(0): Entered viaIGA2Init.
[ 27.806] (II) CHROME(0): SR1B: 0xA0
[ 27.806] (II) CHROME(0): SR2D: 0x2B
[ 27.806] (II) CHROME(0): CR6A: 0x00
[ 27.806] (II) CHROME(0): CR6B: 0x04
[ 27.806] (II) CHROME(0): CR6C: 0x00
[ 27.806] (II) CHROME(0): CR79: 0xAE
[ 27.806] (II) CHROME(0): Exiting viaIGA2Init.
[ 27.806] (II) CHROME(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz eP)
[ 27.806] (II) CHROME(0): CrtcHDisplay: 0x400
[ 27.806] (II) CHROME(0): CrtcHBlankStart: 0x400
[ 27.806] (II) CHROME(0): CrtcHSyncStart: 0x430
[ 27.806] (II) CHROME(0): CrtcHSyncEnd: 0x498
[ 27.806] (II) CHROME(0): CrtcHBlankEnd: 0x530
[ 27.806] (II) CHROME(0): CrtcHTotal: 0x530
[ 27.806] (II) CHROME(0): CrtcHSkew: 0x0
[ 27.806] (II) CHROME(0): CrtcVDisplay: 0x300
[ 27.806] (II) CHROME(0): CrtcVBlankStart: 0x300
[ 27.806] (II) CHROME(0): CrtcVSyncStart: 0x303
[ 27.806] (II) CHROME(0): CrtcVSyncEnd: 0x307
[ 27.806] (II) CHROME(0): CrtcVBlankEnd: 0x31e
[ 27.806] (II) CHROME(0): CrtcVTotal: 0x31e
[ 27.806] (II) CHROME(0): Entered viaIGA2SetColorDepth.
[ 27.806] (II) CHROME(0): IGA2 Color Depth: 32 bit
[ 27.806] (II) CHROME(0): Exiting viaIGA2SetColorDepth.
[ 27.806] (II) CHROME(0): Entered viaIGA2SetDisplayRegister.
[ 27.806] (II) CHROME(0): Requested Screen Mode: 1024x768
[ 27.806] (II) CHROME(0): IGA2 CrtcHTotal: 1328
[ 27.806] (II) CHROME(0): IGA2 CrtcHDisplay: 1024
[ 27.806] (II) CHROME(0): IGA2 CrtcHBlankStart: 1024
[ 27.806] (II) CHROME(0): IGA2 CrtcHBlankEnd: 1328
[ 27.806] (II) CHROME(0): IGA2 CrtcHSyncStart: 1072
[ 27.806] (II) CHROME(0): IGA2 CrtcHSyncEnd: 1176
[ 27.806] (II) CHROME(0): IGA2 CrtcVTotal: 798
[ 27.807] (II) CHROME(0): IGA2 CrtcVDisplay: 768
[ 27.807] (II) CHROME(0): IGA2 CrtcVBlankStart: 768
[ 27.807] (II) CHROME(0): IGA2 CrtcVBlankEnd: 798
[ 27.807] (II) CHROME(0): IGA2 CrtcVSyncStart: 771
[ 27.807] (II) CHROME(0): IGA2 CrtcVSyncEnd: 775
[ 27.807] (II) CHROME(0): Exiting viaIGA2SetDisplayRegister.
[ 27.807] (II) CHROME(0): ViaSetSecondaryFIFO
[ 27.807] (II) CHROME(0): ViaSetDotclock to 0x04704d
[ 27.807] (II) CHROME(0): ViaSetUseExternalClock
[ 27.807] (II) CHROME(0): Entered viaIGA2SetFBStartingAddress.
[ 27.807] (II) CHROME(0): Base Address: 0x0
[ 27.807] (II) CHROME(0): DRI Base Address: 0x60000
[ 27.807] (II) CHROME(0): CR62: 0x00
[ 27.807] (II) CHROME(0): CR63: 0x00
[ 27.807] (II) CHROME(0): CR64: 0x0C
[ 27.807] (II) CHROME(0): CRA3: 0x00
[ 27.807] (II) CHROME(0): Exiting viaIGA2SetFBStartingAddress.
[ 27.807] (II) CHROME(0): Entered viaIGA2DisplayChannel.
[ 27.807] (II) CHROME(0): IGA2 Display Channel: On
[ 27.807] (II) CHROME(0): Exiting viaIGA2DisplayChannel.
[ 27.807] (II) CHROME(0): Entered viaIGA2HWReset.
[ 27.807] (II) CHROME(0): IGA2 HW Reset: Off
[ 27.807] (II) CHROME(0): Exiting viaIGA2HWReset.
[ 27.807] (II) CHROME(0): Exiting iga2_crtc_mode_set.
[ 27.807] (II) CHROME(0): Entered viaDFPLowSetDisplaySource.
[ 27.807] (II) CHROME(0): DFP Low Display Output Source: IGA2
[ 27.807] (II) CHROME(0): Exiting viaDFPLowSetDisplaySource.
[ 27.807] (II) CHROME(0): Entered viaDFPHighSetDisplaySource.
[ 27.807] (II) CHROME(0): DFP High Display Output Source: IGA2
[ 27.807] (II) CHROME(0): Exiting viaDFPHighSetDisplaySource.
[ 27.807] (II) CHROME(0): Entering iga2_crtc_gamma_set.
[ 27.807] (II) CHROME(0): Entered viaIGA2SetPaletteLUTResolution.
[ 27.807] (II) CHROME(0): IGA2 Palette LUT Resolution: 8 bit
[ 27.807] (II) CHROME(0): Exiting viaIGA2SetPaletteLUTResolution.
[ 27.807] (II) CHROME(0): Entered viaSetPaletteLUTAccess.
[ 27.807] (II) CHROME(0): Palette LUT Access: IGA2
[ 27.807] (II) CHROME(0): Exiting viaSetPaletteLUTAccess.
[ 27.807] (II) CHROME(0): VIALoadRgbLut
[ 27.807] (II) CHROME(0): Entered viaIGA2SetGamma.
[ 27.807] (II) CHROME(0): IGA2 Gamma Correction: Off
[ 27.807] (II) CHROME(0): Exiting viaIGA2SetGamma.
[ 27.807] (II) CHROME(0): Exiting iga2_crtc_gamma_set.
[ 27.807] (II) CHROME(0): Entering iga2_crtc_commit.
[ 27.807] (II) CHROME(0): Entered viaIGA2DisplayOutput.
[ 27.807] (II) CHROME(0): IGA2 Display Output: On
[ 27.807] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
[ 27.807] (II) CHROME(0): Exiting iga2_crtc_commit.
[ 27.807] (II) CHROME(0): Entered ViaLVDSPower.
[ 27.807] (II) CHROME(0): Integrated LVDS Flat Panel Power: On
[ 27.807] (II) CHROME(0): Exiting ViaLVDSPower.
[ 27.807] (II) CHROME(0): Entered viaFPIOPadSetting.
[ 27.807] (II) CHROME(0): SR12: 0x72
[ 27.807] (II) CHROME(0): SR13: 0x08
[ 27.807] (II) CHROME(0): Exiting viaFPIOPadSetting.
[ 27.807] (II) CHROME(0): Entered viaFPIOPadSetting.
[ 27.807] (II) CHROME(0): SR12: 0x72
[ 27.807] (II) CHROME(0): SR13: 0x08
[ 27.807] (II) CHROME(0): Exiting viaFPIOPadSetting.
[ 27.807] (II) CHROME(0): Entered via_analog_dpms.
[ 27.807] (II) CHROME(0): Entered viaAnalogOutput.
[ 27.807] (II) CHROME(0): Analog VGA Output: Off
[ 27.807] (II) CHROME(0): Exiting viaAnalogOutput.
[ 27.807] (II) CHROME(0): Exiting via_analog_dpms.
[ 27.807] (II) CHROME(0): ViaTVPower: Off.
[ 27.807] (II) CHROME(0): VT1622Power
[ 27.809] (II) CHROME(0): Entered iga1_crtc_dpms.
[ 27.809] (II) CHROME(0): Entered viaIGA1DPMSControl.
[ 27.809] (II) CHROME(0): Exiting viaIGA1DPMSControl.
[ 27.809] (II) CHROME(0): Exiting iga1_crtc_dpms.
[ 27.809] DRM memory allocation failed -6
[ 27.809] 635904 bytes of Linear memory allocated at 649000, handle 23863968
[ 27.813] (II) CHROME(0): Benchmarking video copy. Less time is better.
[ 27.823] (--) CHROME(0): Timed libc YUV420 copy... 6881507. Throughput: 146.6 MiB/s.
[ 27.831] (--) CHROME(0): Timed kernel YUV420 copy... 6870256. Throughput: 146.8 MiB/s.
[ 27.839] (--) CHROME(0): Timed SSE YUV420 copy... 6679773. Throughput: 151.0 MiB/s.
[ 27.847] (--) CHROME(0): Timed MMX YUV420 copy... 6780022. Throughput: 148.8 MiB/s.
[ 27.847] (--) CHROME(0): Ditching 3DNow! YUV420 copy. Not supported by CPU.
[ 27.855] (--) CHROME(0): Timed MMX2 YUV420 copy... 6659986. Throughput: 151.4 MiB/s.
[ 27.855] Freed 6590464 (pool 4)
[ 27.856] (--) CHROME(0): Using MMX2 YUV42X copy for video.
[ 27.865] (WW) CHROME(0): [XvMC] Cannot use XvMC without DRI!
[ 27.865] (WW) CHROME(0): Option "DRI" is not used
[ 27.865] (II) CHROME(0): - Done
[ 27.866] (II) Initializing extension Generic Event Extension
[ 27.866] (II) Initializing extension SHAPE
[ 27.866] (II) Initializing extension MIT-SHM
[ 27.867] (II) Initializing extension XInputExtension
[ 27.867] (II) Initializing extension XTEST
[ 27.868] (II) Initializing extension BIG-REQUESTS
[ 27.868] (II) Initializing extension SYNC
[ 27.869] (II) Initializing extension XKEYBOARD
[ 27.869] (II) Initializing extension XC-MISC
[ 27.870] (II) Initializing extension SECURITY
[ 27.870] (II) Initializing extension XFIXES
[ 27.871] (II) Initializing extension RENDER
[ 27.871] (II) Initializing extension RANDR
[ 27.872] (II) Initializing extension COMPOSITE
[ 27.872] (II) Initializing extension DAMAGE
[ 27.873] (II) Initializing extension MIT-SCREEN-SAVER
[ 27.873] (II) Initializing extension DOUBLE-BUFFER
[ 27.874] (II) Initializing extension RECORD
[ 27.874] (II) Initializing extension DPMS
[ 27.875] (II) Initializing extension Present
[ 27.875] (II) Initializing extension DRI3
[ 27.875] (II) Initializing extension X-Resource
[ 27.875] (II) Initializing extension XVideo
[ 27.876] (II) Initializing extension XVideo-MotionCompensation
[ 27.876] (II) Initializing extension GLX
[ 27.876] (II) AIGLX: Screen 0 is not DRI2 capable
[ 30.727] (II) IGLX: Loaded and initialized swrast
[ 30.727] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 30.727] (II) Initializing extension XFree86-VidModeExtension
[ 30.728] (II) Initializing extension XFree86-DGA
[ 30.730] (II) Initializing extension XFree86-DRI
[ 30.730] (II) Initializing extension DRI2
[ 30.731] (II) CHROME(0): Setting screen physical size to 270 x 203
[ 30.731] (II) CHROME(0): Entered via_xf86crtc_resize.
[ 30.731] (II) CHROME(0): Now attempting to resize the screen . . .
[ 30.731] (II) CHROME(0): It was determined that there is no need to resize the screen.
[ 30.731] (II) CHROME(0): Exiting via_xf86crtc_resize.
[ 31.314] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 31.315] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 31.315] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 31.315] (**) Power Button: Applying InputClass "system-keyboard"
[ 31.315] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 31.315] (II) LoadModule: "libinput"
[ 31.315] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 31.382] (II) Module libinput: vendor="X.Org Foundation"
[ 31.382] compiled for 1.19.6, module version = 0.27.1
[ 31.382] Module class: X.Org XInput Driver
[ 31.382] ABI class: X.Org XInput driver, version 24.1
[ 31.382] (II) Using input driver 'libinput' for 'Power Button'
[ 31.382] (**) Power Button: always reports core events
[ 31.382] (**) Option "Device" "/dev/input/event4"
[ 31.382] (**) Option "_source" "server/udev"
[ 31.383] (II) event4 - Power Button: is tagged by udev as: Keyboard
[ 31.383] (II) event4 - Power Button: device is a keyboard
[ 31.383] (II) event4 - Power Button: device removed
[ 31.403] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4"
[ 31.403] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 31.403] (**) Option "xkb_model" "pc105"
[ 31.403] (**) Option "xkb_layout" "gb"
[ 31.403] (WW) Option "xkb_variant" requires a string value
[ 31.403] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 31.485] (II) event4 - Power Button: is tagged by udev as: Keyboard
[ 31.485] (II) event4 - Power Button: device is a keyboard
[ 31.486] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 31.486] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 31.486] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 31.486] (**) Video Bus: Applying InputClass "system-keyboard"
[ 31.486] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[ 31.486] (II) Using input driver 'libinput' for 'Video Bus'
[ 31.487] (**) Video Bus: always reports core events
[ 31.487] (**) Option "Device" "/dev/input/event5"
[ 31.487] (**) Option "_source" "server/udev"
[ 31.488] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 31.488] (II) event5 - Video Bus: device is a keyboard
[ 31.488] (II) event5 - Video Bus: device removed
[ 31.503] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input9/event5"
[ 31.503] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 31.503] (**) Option "xkb_model" "pc105"
[ 31.503] (**) Option "xkb_layout" "gb"
[ 31.503] (WW) Option "xkb_variant" requires a string value
[ 31.503] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 31.505] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 31.505] (II) event5 - Video Bus: device is a keyboard
[ 31.506] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 31.506] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 31.506] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 31.506] (**) Power Button: Applying InputClass "system-keyboard"
[ 31.506] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 31.506] (II) Using input driver 'libinput' for 'Power Button'
[ 31.506] (**) Power Button: always reports core events
[ 31.506] (**) Option "Device" "/dev/input/event2"
[ 31.506] (**) Option "_source" "server/udev"
[ 31.507] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 31.507] (II) event2 - Power Button: device is a keyboard
[ 31.508] (II) event2 - Power Button: device removed
[ 31.526] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event2"
[ 31.526] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 31.526] (**) Option "xkb_model" "pc105"
[ 31.526] (**) Option "xkb_layout" "gb"
[ 31.526] (WW) Option "xkb_variant" requires a string value
[ 31.526] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 31.528] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 31.528] (II) event2 - Power Button: device is a keyboard
[ 31.529] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 31.530] (II) No input driver specified, ignoring this device.
[ 31.530] (II) This device may have been added with another device file.
[ 31.531] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[ 31.531] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 31.531] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 31.532] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[ 31.532] (**) Logitech USB Optical Mouse: always reports core events
[ 31.532] (**) Option "Device" "/dev/input/event1"
[ 31.532] (**) Option "_source" "server/udev"
[ 31.584] (II) event1 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[ 31.584] (II) event1 - Logitech USB Optical Mouse: device is a pointer
[ 31.584] (II) event1 - Logitech USB Optical Mouse: device removed
[ 31.603] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/0003:046D:C077.0001/input/input5/event1"
[ 31.603] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
[ 31.604] (**) Option "AccelerationScheme" "none"
[ 31.604] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[ 31.604] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 31.604] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 31.657] (II) event1 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[ 31.657] (II) event1 - Logitech USB Optical Mouse: device is a pointer
[ 31.659] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 31.660] (II) No input driver specified, ignoring this device.
[ 31.660] (II) This device may have been added with another device file.
[ 31.661] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 31.661] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 31.661] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 31.661] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 31.661] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 31.661] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 31.661] (**) AT Translated Set 2 keyboard: always reports core events
[ 31.662] (**) Option "Device" "/dev/input/event0"
[ 31.662] (**) Option "_source" "server/udev"
[ 31.663] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 31.663] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 31.663] (II) event0 - AT Translated Set 2 keyboard: device removed
[ 31.680] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 31.680] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 31.680] (**) Option "xkb_model" "pc105"
[ 31.680] (**) Option "xkb_layout" "gb"
[ 31.680] (WW) Option "xkb_variant" requires a string value
[ 31.680] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 31.682] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 31.682] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 31.684] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event6)
[ 31.684] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 31.684] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "libinput touchpad catchall"
[ 31.684] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 31.684] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[ 31.684] (II) LoadModule: "synaptics"
[ 31.684] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 31.700] (II) Module synaptics: vendor="X.Org Foundation"
[ 31.700] compiled for 1.19.0, module version = 1.9.0
[ 31.700] Module class: X.Org XInput Driver
[ 31.700] ABI class: X.Org XInput driver, version 24.1
[ 31.700] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 31.700] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 31.700] (**) Option "Device" "/dev/input/event6"
[ 31.720] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (res 0)
[ 31.720] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (res 0)
[ 31.720] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 31.720] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[ 31.720] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 31.720] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[ 31.720] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
[ 31.720] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 31.720] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 31.740] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input13/event6"
[ 31.740] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 11)
[ 31.740] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 31.740] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
[ 31.740] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.156
[ 31.740] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 31.740] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 31.740] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 31.740] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 31.741] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 31.742] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[ 31.742] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[ 31.758] (II) CHROME(0): Entered iga2_crtc_dpms.
[ 31.758] (II) CHROME(0): Entered viaIGA2DisplayOutput.
[ 31.758] (II) CHROME(0): IGA2 Display Output: On
[ 31.758] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
[ 31.758] (II) CHROME(0): Exiting iga2_crtc_dpms.
[ 31.758] (II) CHROME(0): Entered ViaLVDSPower.
[ 31.758] (II) CHROME(0): Integrated LVDS Flat Panel Power: On
[ 31.758] (II) CHROME(0): Exiting ViaLVDSPower.
[ 31.758] (II) CHROME(0): Entered viaFPIOPadSetting.
[ 31.758] (II) CHROME(0): SR12: 0x72
[ 31.758] (II) CHROME(0): SR13: 0x08
[ 31.758] (II) CHROME(0): Exiting viaFPIOPadSetting.
I see a typo "modproe.blacklist=viafb", try again with modprobe.blacklist=viafb.
You can then edit /etc/default/grub and add that parameter
GRUB_CMDLINE_LINUX_DEFAULT="quiet modprobe.blacklist=viafb" and run update-grub.
Well spotted, sorry for that. Here's the Xorg.0.log again. This is when it can boot into a GUI login screen, but does not allow a Xfce session to start.
[ 59.138]
X.Org X Server 1.20.0
X Protocol Version 11, Revision 0
[ 59.138] Build Operating System: Linux Arch Linux
[ 59.138] Current Operating System: Linux manjaro 4.4.132-1-MANJARO #1 SMP PREEMPT Mon May 21 11:34:47 UTC 2018 i686
[ 59.138] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4-i686 root=UUID=1f796b68-e11a-4aa0-865e-c5d12e06e393 rw modprobe.blacklist=viafb
[ 59.138] Build Date: 18 May 2018 05:24:39PM
[ 59.138]
[ 59.138] Current version of pixman: 0.34.0
[ 59.138] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 59.138] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 59.138] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 25 18:22:45 2018
[ 59.139] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 59.139] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 59.146] (==) No Layout section. Using the first Screen section.
[ 59.148] (==) No screen section available. Using defaults.
[ 59.148] (**) |-->Screen "Default Screen Section" (0)
[ 59.148] (**) | |-->Monitor "<default monitor>"
[ 59.149] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 59.149] (**) | |-->Device "Device0"
[ 59.149] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 59.149] (==) Automatically adding devices
[ 59.149] (==) Automatically enabling devices
[ 59.149] (==) Automatically adding GPU devices
[ 59.149] (==) Automatically binding GPU devices
[ 59.149] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 59.149] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[ 59.149] Entry deleted from font path.
[ 59.149] (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[ 59.149] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[ 59.149] Entry deleted from font path.
[ 59.149] (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[ 59.149] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1
[ 59.149] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 59.149] (WW) Ignoring unrecognized extension "Composite"
[ 59.149] (**) Extension "RENDER" is enabled
[ 59.178] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 59.183] (II) Module ABI versions:
[ 59.183] X.Org ANSI C Emulation: 0.4
[ 59.183] X.Org Video Driver: 24.0
[ 59.183] X.Org XInput driver : 24.1
[ 59.183] X.Org Server Extension : 10.0
[ 59.186] (++) using VT number 1
[ 59.186] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 59.222] (--) PCI:*(1@0:0:0) 1106:3118:1734:1078 rev 2, Mem @ 0xf0000000/67108864, 0xd1000000/16777216
[ 59.222] (II) LoadModule: "glx"
[ 59.222] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 59.250] (II) Module glx: vendor="X.Org Foundation"
[ 59.259] compiled for 1.20.0, module version = 1.0.0
[ 59.259] ABI class: X.Org Server Extension, version 10.0
[ 59.259] (II) LoadModule: "openchrome"
[ 59.262] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
[ 59.263] (II) Module openchrome: vendor="https://www.freedesktop.org/wiki/Openchrome/"
[ 59.263] compiled for 1.20.0, module version = 0.6.0
[ 59.272] Module class: X.Org Video Driver
[ 59.272] ABI class: X.Org Video Driver, version 24.0
[ 59.272] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266,
KM400 / KM400A / KN400 / P4M800, K8M800 / K8N800,
PM800 / PN800 / PM880 / CN333 / CN400, P4M800 Pro / VN800 / CN700,
CX700 / VX700, P4M890 / VN890 / CN800, K8M890 / K8N890,
P4M900 / VN896 / CN896, VX800 / VX820, VX855 / VX875, VX900
[ 59.272] (!!) VIA Technologies does not support this driver in any way.
[ 59.272] (!!) For support, please refer to https://www.freedesktop.org/wiki/Openchrome/.
[ 59.272] (!!) (openchrome 0.6.0 release)
[ 59.272] (II) CHROME(0): viaPreInit
[ 59.272] (II) CHROME(0): VIAGetRec
[ 59.272] (--) CHROME(0): Chipset: PM800 / PN800 / PM880 / CN333 / CN400
[ 59.272] (--) CHROME(0): Chipset revision: 0
[ 59.682] (EE) CHROME(0): [drm] Failed to open DRM device for pci:0000:01:00.0: No such file or directory
[ 59.687] (II) Loading sub module "vgahw"
[ 59.687] (II) LoadModule: "vgahw"
[ 59.687] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 59.687] (II) Module vgahw: vendor="X.Org Foundation"
[ 59.687] compiled for 1.20.0, module version = 0.1.0
[ 59.687] ABI class: X.Org Video Driver, version 24.0
[ 59.688] (--) CHROME(0): Probed amount of VideoRAM = 65536 kB
[ 59.688] (II) CHROME(0): Entered viaMapMMIO.
[ 59.688] (--) CHROME(0): Mapping MMIO at address 0xD1000000 with size 52 KB.
[ 59.688] (--) CHROME(0): Mapping 2D Host BitBLT space at address 0xD1200000 with size 2048 KB.
[ 59.688] (--) CHROME(0): Mapping the frame buffer at address 0xF0000000 with size 65536 KB.
[ 59.690] (--) CHROME(0): Frame buffer start address: 0xb24f3000, free start: 0x0 end: 0x4000000
[ 59.691] (II) CHROME(0): Entered viaMMIOEnable.
[ 59.691] (II) CHROME(0): Exiting viaMMIOEnable.
[ 59.691] (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 59.691] (II) CHROME(0): Exiting viaMapMMIO.
[ 59.691] (II) CHROME(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 59.691] (==) CHROME(0): Depth 24, (--) framebuffer bpp 32
[ 59.691] (==) CHROME(0): RGB weight 888
[ 59.691] (==) CHROME(0): Default visual is TrueColor
[ 59.691] (II) CHROME(0): VIASetupDefaultOptions - Setting up default chipset options.
[ 59.691] (==) CHROME(0): Shadow framebuffer is disabled.
[ 59.691] (==) CHROME(0): Hardware acceleration is enabled.
[ 59.691] (==) CHROME(0): Using EXA acceleration architecture.
[ 59.691] (==) CHROME(0): EXA composite acceleration enabled.
[ 59.691] (==) CHROME(0): EXA scratch area size is 4096 kB.
[ 59.691] (==) CHROME(0): Using hardware two-color cursors and software full-color cursors.
[ 59.691] (==) CHROME(0): GPU virtual command queue will be enabled.
[ 59.691] (==) CHROME(0): DRI IRQ will be enabled if DRI is enabled.
[ 59.691] (==) CHROME(0): AGP DMA will be enabled if DRI is enabled.
[ 59.691] (==) CHROME(0): AGP DMA will be used for 2D acceleration.
[ 59.691] (==) CHROME(0): PCI DMA will be used for XV image transfer if DRI is enabled.
[ 59.691] (==) CHROME(0): Xv Bandwidth check is enabled.
[ 59.691] (==) CHROME(0): Will not impose a limit on video RAM reserved for DRI.
[ 59.691] (==) CHROME(0): Will try to allocate 32768 kB of AGP memory.
[ 59.691] (==) CHROME(0): TV dotCrawl is disabled.
[ 59.691] (==) CHROME(0): TV deflicker is set to 0.
[ 59.691] (==) CHROME(0): No default TV type is set.
[ 59.691] (==) CHROME(0): No default TV output signal type is set.
[ 59.691] (==) CHROME(0): Will not print VGA registers.
[ 59.691] (==) CHROME(0): Will not scan I2C buses.
[ 59.691] (II) CHROME(0): Detected MemClk 5
[ 59.691] (II) CHROME(0): ViaGetMemoryBandwidth. Memory type: 5
[ 59.691] (II) CHROME(0): Detected TV standard: PAL.
[ 59.691] (II) Loading sub module "ramdac"
[ 59.691] (II) LoadModule: "ramdac"
[ 59.691] (II) Module "ramdac" already built-in
[ 59.691] (II) Loading sub module "i2c"
[ 59.691] (II) LoadModule: "i2c"
[ 59.691] (II) Module "i2c" already built-in
[ 59.691] (II) CHROME(0): Entered ViaI2CInit.
[ 59.691] (II) CHROME(0): Entered ViaI2CBus1Init.
[ 59.691] (II) CHROME(0): I2C bus "I2C Bus 1" initialized.
[ 59.691] (II) CHROME(0): Exiting ViaI2CBus1Init.
[ 59.691] (II) CHROME(0): Entered ViaI2CBus2Init.
[ 59.691] (II) CHROME(0): I2C bus "I2C Bus 2" initialized.
[ 59.691] (II) CHROME(0): Exiting ViaI2CBus2Init.
[ 59.691] (II) CHROME(0): Entered ViaI2CBus3Init.
[ 59.691] (II) CHROME(0): I2C bus "I2C Bus 3" initialized.
[ 59.691] (II) CHROME(0): Exiting ViaI2CBus3Init.
[ 59.691] (II) CHROME(0): Exiting ViaI2CInit.
[ 59.691] (II) Loading sub module "ddc"
[ 59.691] (II) LoadModule: "ddc"
[ 59.691] (II) Module "ddc" already built-in
[ 59.691] (II) CHROME(0): Entered viaOutputDetect.
[ 59.691] (II) CHROME(0): Entered viaProbePinStrapping.
[ 59.691] (II) CHROME(0): Probing VIA Technologies IGP pin strapping . . .
[ 59.691] (II) CHROME(0): SR12: 0x72
[ 59.691] (II) CHROME(0): SR13: 0x08
[ 59.691] (II) CHROME(0): A TV encoder is detected on DVP0 (Digital Video Port 0).
[ 59.691] (II) CHROME(0): 24-bit FPDP (Flat Panel Display Port) detected.
[ 59.691] (II) CHROME(0): Detected Flat Panel Type from Strapping Pins: 2
[ 59.691] (II) CHROME(0): Exiting viaProbePinStrapping.
[ 59.691] (II) CHROME(0): Entered via_analog_init.
[ 59.692] (II) CHROME(0): Output VGA-1 has no monitor section
[ 59.692] (II) CHROME(0): Exiting via_analog_init.
[ 59.692] (II) CHROME(0): Entered via_tv_init.
[ 59.692] (II) CHROME(0): ViaVT162xDetect
[ 59.692] (II) CHROME(0): I2C device "I2C Bus 2:VT162x" registered at address 0x40.
[ 59.693] (--) CHROME(0): Detected VIA Technologies VT1622A/VT1623 TV Encoder
[ 59.693] (II) CHROME(0): ViaVT162xInit
[ 59.693] (II) CHROME(0): Output TV-1 has no monitor section
[ 59.693] (II) CHROME(0): VT162xSave
[ 59.821] (II) CHROME(0): Exiting via_tv_init.
[ 59.823] (II) CHROME(0): Entered via_dvi_init.
[ 59.823] (II) CHROME(0): Probing I2C Bus 2 for VT1632.
[ 59.823] (II) CHROME(0): Entered viaVT1632Init.
[ 59.823] (--) CHROME(0): I2C device not found.
[ 59.823] (II) CHROME(0): Exiting viaVT1632Init.
[ 59.823] (II) CHROME(0): I2C Bus 2 was not initialized for DVI use.
[ 59.823] (II) CHROME(0): Probing I2C Bus 3 for VT1632.
[ 59.823] (II) CHROME(0): Entered viaVT1632Init.
[ 59.824] (--) CHROME(0): I2C device not found.
[ 59.824] (II) CHROME(0): Exiting viaVT1632Init.
[ 59.824] (II) CHROME(0): I2C Bus 3 was not initialized for DVI use.
[ 59.824] (II) CHROME(0): Probing I2C Bus 2 for SiI 164.
[ 59.824] (II) CHROME(0): Entered viaSiI164Init.
[ 59.824] (--) CHROME(0): I2C device not found.
[ 59.824] (II) CHROME(0): Exiting viaSiI164Init.
[ 59.824] (II) CHROME(0): I2C Bus 2 was not initialized for DVI use.
[ 59.824] (II) CHROME(0): Probing I2C Bus 3 for SiI 164.
[ 59.824] (II) CHROME(0): Entered viaSiI164Init.
[ 59.824] (--) CHROME(0): I2C device not found.
[ 59.824] (II) CHROME(0): Exiting viaSiI164Init.
[ 59.824] (II) CHROME(0): I2C Bus 3 was not initialized for DVI use.
[ 59.824] (II) CHROME(0): Exiting via_dvi_init.
[ 59.824] (==) CHROME(0): LVDS-0 : DVI Center is disabled.
[ 59.824] (II) CHROME(0): Output FP-1 has no monitor section
[ 59.824] (II) CHROME(0): Exiting viaOutputDetect.
[ 59.824] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 1.
[ 59.824] (II) CHROME(0): I2C device "I2C Bus 1:ddc2" registered at address 0xA0.
[ 59.833] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 1.
[ 59.833] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 2.
[ 59.833] (II) CHROME(0): I2C device "I2C Bus 2:ddc2" registered at address 0xA0.
[ 59.841] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 2.
[ 59.841] (--) CHROME(0): Now perform manual detection of a VGA monitor.
[ 59.841] (II) CHROME(0): EDID for output VGA-1
[ 59.841] (II) CHROME(0): VT1622DACSense
[ 59.872] (--) CHROME(0): VT162x: Nothing connected.
[ 59.872] (II) CHROME(0): EDID for output TV-1
[ 59.872] (II) CHROME(0): Entered via_lvds_detect.
[ 59.872] (II) CHROME(0): Entered viaLVDSGetFPInfoFromScratchPad.
[ 59.872] (II) CHROME(0): VIA Technologies VGA BIOS Scratch Pad Register Flat Panel Index: 2
[ 59.872] (II) CHROME(0): Flat Panel Native Resolution: 1024x768
[ 59.872] (II) CHROME(0): Flat Panel Dual Edge Transfer: Off
[ 59.872] (II) CHROME(0): Flat Panel Output Color Dithering: On (18 bit)
[ 59.872] (II) CHROME(0): Exiting viaLVDSGetFPInfoFromScratchPad.
[ 59.872] (II) CHROME(0): Exiting via_lvds_detect.
[ 59.872] (II) CHROME(0): Entered via_lvds_get_modes.
[ 59.872] (II) CHROME(0): Exiting via_lvds_get_modes.
[ 59.872] (II) CHROME(0): Printing probed modes for output FP-1
[ 59.872] (II) CHROME(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz eP)
[ 59.872] (II) CHROME(0): Output VGA-1 disconnected
[ 59.872] (II) CHROME(0): Output TV-1 disconnected
[ 59.872] (II) CHROME(0): Output FP-1 connected
[ 59.872] (II) CHROME(0): Using exact sizes for initial modes
[ 59.873] (II) CHROME(0): Output FP-1 using initial mode 1024x768 +0+0
[ 59.873] (==) CHROME(0): Using gamma correction (1.0, 1.0, 1.0)
[ 59.873] (==) CHROME(0): DPI set to (96, 96)
[ 59.873] (II) Loading sub module "fb"
[ 59.873] (II) LoadModule: "fb"
[ 59.873] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 59.873] (II) Module fb: vendor="X.Org Foundation"
[ 59.873] compiled for 1.20.0, module version = 1.0.0
[ 59.873] ABI class: X.Org ANSI C Emulation, version 0.4
[ 59.873] (II) Loading sub module "exa"
[ 59.873] (II) LoadModule: "exa"
[ 59.873] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 59.874] (II) Module exa: vendor="X.Org Foundation"
[ 59.874] compiled for 1.20.0, module version = 2.6.0
[ 59.874] ABI class: X.Org Video Driver, version 24.0
[ 59.874] (II) CHROME(0): VIAScreenInit
[ 59.874] (II) CHROME(0): Frame Buffer From (0,0) To (1024,16384)
[ 59.874] (II) CHROME(0): Using 15616 lines for offscreen memory.
[ 59.874] 3145728 bytes of Linear memory allocated at 300000, handle 21674608
[ 59.874] (II) CHROME(0): Entered umsAccelInit.
[ 59.874] 262144 bytes of Linear memory allocated at 600000, handle 21674752
[ 59.874] (II) CHROME(0): Initializing the 2D engine.
[ 59.874] (II) CHROME(0): Initializing the 3D engine.
[ 59.874] 32 bytes of Linear memory allocated at 640000, handle 21674896
[ 59.874] 32 bytes of Linear memory allocated at 640080, handle 21675040
[ 59.874] (II) CHROME(0): Exiting umsAccelInit.
[ 59.874] (II) CHROME(0): - Visuals set up
[ 59.874] (II) CHROME(0): - B & W
[ 59.874] (**) CHROME(0): Option "MigrationHeuristic" "greedy"
[ 59.874] (II) EXA(0): Offscreen pixmap area of 63963136 bytes
[ 59.874] (II) EXA(0): Driver registered support for the following operations:
[ 59.874] (II) Solid
[ 59.874] (II) Copy
[ 59.874] (II) Composite (RENDER acceleration)
[ 59.874] (II) CHROME(0): [EXA] Enabled EXA acceleration.
[ 59.874] (==) CHROME(0): Backing store enabled
[ 59.874] (II) CHROME(0): - Backing store set up
[ 59.874] (II) CHROME(0): - SW cursor set up
[ 59.874] (II) CHROME(0): HWCursor ARGB enabled
[ 59.874] 16384 bytes of Linear memory allocated at 641000, handle 21675424
[ 59.874] 16384 bytes of Linear memory allocated at 645000, handle 21675136
[ 59.875] (II) CHROME(0): - Def Color map set up
[ 59.875] (II) CHROME(0): - Palette loaded
[ 59.875] (II) CHROME(0): - Color maps etc. set up
[ 59.875] (==) CHROME(0): DPMS enabled
[ 59.875] (II) CHROME(0): - DPMS set up
[ 59.875] (II) CHROME(0): VIAEnterVT
[ 59.875] (II) CHROME(0): Entered viaIGA1Save.
[ 59.876] (II) CHROME(0): Saving sequencer registers.
[ 59.876] (II) CHROME(0): Finished saving sequencer registers.
[ 59.876] (II) CHROME(0): Saving IGA1 registers.
[ 59.876] (II) CHROME(0): Finished saving IGA1 registers.
[ 59.876] (II) CHROME(0): Exiting viaIGA1Save.
[ 59.876] (II) CHROME(0): Entered iga2_crtc_save.
[ 59.876] (II) CHROME(0): Entered viaIGA2Save.
[ 59.876] (II) CHROME(0): Saving IGA2 registers.
[ 59.876] (II) CHROME(0): Finished saving IGA2 registers.
[ 59.876] (II) CHROME(0): Exiting viaIGA2Save.
[ 59.876] (II) CHROME(0): Exiting iga2_crtc_save.
[ 59.876] (II) CHROME(0): VT162xSave
[ 60.103] (II) CHROME(0): Entered via_analog_dpms.
[ 60.103] (II) CHROME(0): Entered viaAnalogOutput.
[ 60.103] (II) CHROME(0): Analog VGA Output: Off
[ 60.103] (II) CHROME(0): Exiting viaAnalogOutput.
[ 60.103] (II) CHROME(0): Exiting via_analog_dpms.
[ 60.103] (II) CHROME(0): ViaTVPower: Off.
[ 60.103] (II) CHROME(0): VT1622Power
[ 60.105] (II) CHROME(0): Entered ViaLVDSPower.
[ 60.105] (II) CHROME(0): Integrated LVDS Flat Panel Power: Off
[ 60.105] (II) CHROME(0): Exiting ViaLVDSPower.
[ 60.105] (II) CHROME(0): Entered viaFPIOPadSetting.
[ 60.105] (II) CHROME(0): SR12: 0x72
[ 60.105] (II) CHROME(0): SR13: 0x08
[ 60.105] (II) CHROME(0): Exiting viaFPIOPadSetting.
[ 60.105] (II) CHROME(0): Entered iga1_crtc_dpms.
[ 60.105] (II) CHROME(0): Entered viaIGA1DPMSControl.
[ 60.105] (II) CHROME(0): Exiting viaIGA1DPMSControl.
[ 60.105] (II) CHROME(0): Exiting iga1_crtc_dpms.
[ 60.105] (II) CHROME(0): Entered iga2_crtc_dpms.
[ 60.105] (II) CHROME(0): Entered viaIGA2DisplayOutput.
[ 60.105] (II) CHROME(0): IGA2 Display Output: Off
[ 60.105] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
[ 60.105] (II) CHROME(0): Exiting iga2_crtc_dpms.
[ 60.105] (II) CHROME(0): Entered viaIGA2ModeValid.
[ 60.105] (II) CHROME(0): Exiting viaIGA2ModeValid.
[ 60.105] (II) CHROME(0): Entered ViaLVDSPower.
[ 60.106] (II) CHROME(0): Integrated LVDS Flat Panel Power: Off
[ 60.106] (II) CHROME(0): Exiting ViaLVDSPower.
[ 60.106] (II) CHROME(0): Entered viaFPIOPadSetting.
[ 60.106] (II) CHROME(0): SR12: 0x72
[ 60.106] (II) CHROME(0): SR13: 0x08
[ 60.106] (II) CHROME(0): Exiting viaFPIOPadSetting.
[ 60.106] (II) CHROME(0): Entered viaFPIOPadSetting.
[ 60.106] (II) CHROME(0): SR12: 0x72
[ 60.106] (II) CHROME(0): SR13: 0x08
[ 60.106] (II) CHROME(0): Exiting viaFPIOPadSetting.
[ 60.106] (II) CHROME(0): Entered iga2_crtc_prepare.
[ 60.106] (II) CHROME(0): Entered viaIGA2DisplayOutput.
[ 60.106] (II) CHROME(0): IGA2 Display Output: Off
[ 60.106] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
[ 60.106] (II) CHROME(0): Exiting iga2_crtc_prepare.
[ 60.106] (II) CHROME(0): Entered iga2_crtc_mode_set.
[ 60.106] (II) CHROME(0): Entered viaIGA2HWReset.
[ 60.106] (II) CHROME(0): IGA2 HW Reset: On
[ 60.106] (II) CHROME(0): Exiting viaIGA2HWReset.
[ 60.106] (II) CHROME(0): Entered viaIGA2DisplayChannel.
[ 60.106] (II) CHROME(0): IGA2 Display Channel: Off
[ 60.106] (II) CHROME(0): Exiting viaIGA2DisplayChannel.
[ 60.106] (II) CHROME(0): Entered viaIGAInitCommon.
[ 60.106] (II) CHROME(0): Enable Register: 0x01
[ 60.106] (II) CHROME(0): Misc. Register: 0xCF
[ 60.106] (II) CHROME(0): Enable Register: 0x01
[ 60.106] (II) CHROME(0): Misc. Register: 0xEF
[ 60.106] (II) CHROME(0): SR15: 0xAE
[ 60.106] (II) CHROME(0): SR19: 0x7F
[ 60.106] (II) CHROME(0): SR1A: 0x4A
[ 60.106] (II) CHROME(0): SR1E: 0x01
[ 60.106] (II) CHROME(0): SR2D: 0xBF
[ 60.106] (II) CHROME(0): SR2E: 0xFF
[ 60.106] (II) CHROME(0): SR3F: 0xFF
[ 60.106] (II) CHROME(0): CR36: 0x31
[ 60.106] (II) CHROME(0): CR3B: 0x03
[ 60.106] (II) CHROME(0): CR3C: 0x08
[ 60.106] (II) CHROME(0): CR3D: 0x54
[ 60.106] (II) CHROME(0): CR3E: 0x70
[ 60.106] (II) CHROME(0): CR3F: 0x02
[ 60.106] (II) CHROME(0): CR47: 0x04
[ 60.106] (II) CHROME(0): CR6B: 0x0C
[ 60.106] (II) CHROME(0): Exiting viaIGAInitCommon.
[ 60.106] (II) CHROME(0): Entered viaIGA2Init.
[ 60.106] (II) CHROME(0): SR1B: 0xF0
[ 60.106] (II) CHROME(0): SR2D: 0x3F
[ 60.106] (II) CHROME(0): CR6A: 0x00
[ 60.106] (II) CHROME(0): CR6B: 0x04
[ 60.106] (II) CHROME(0): CR6C: 0x00
[ 60.106] (II) CHROME(0): CR79: 0xAF
[ 60.106] (II) CHROME(0): Exiting viaIGA2Init.
[ 60.106] (II) CHROME(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz eP)
[ 60.106] (II) CHROME(0): CrtcHDisplay: 0x400
[ 60.106] (II) CHROME(0): CrtcHBlankStart: 0x400
[ 60.106] (II) CHROME(0): CrtcHSyncStart: 0x430
[ 60.106] (II) CHROME(0): CrtcHSyncEnd: 0x498
[ 60.106] (II) CHROME(0): CrtcHBlankEnd: 0x530
[ 60.106] (II) CHROME(0): CrtcHTotal: 0x530
[ 60.106] (II) CHROME(0): CrtcHSkew: 0x0
[ 60.106] (II) CHROME(0): CrtcVDisplay: 0x300
[ 60.106] (II) CHROME(0): CrtcVBlankStart: 0x300
[ 60.106] (II) CHROME(0): CrtcVSyncStart: 0x303
[ 60.106] (II) CHROME(0): CrtcVSyncEnd: 0x307
[ 60.106] (II) CHROME(0): CrtcVBlankEnd: 0x31e
[ 60.106] (II) CHROME(0): CrtcVTotal: 0x31e
[ 60.106] (II) CHROME(0): Entered viaIGA2SetColorDepth.
[ 60.106] (II) CHROME(0): IGA2 Color Depth: 32 bit
[ 60.106] (II) CHROME(0): Exiting viaIGA2SetColorDepth.
[ 60.106] (II) CHROME(0): Entered viaIGA2SetDisplayRegister.
[ 60.106] (II) CHROME(0): Requested Screen Mode: 1024x768
[ 60.106] (II) CHROME(0): IGA2 CrtcHTotal: 1328
[ 60.106] (II) CHROME(0): IGA2 CrtcHDisplay: 1024
[ 60.107] (II) CHROME(0): IGA2 CrtcHBlankStart: 1024
[ 60.107] (II) CHROME(0): IGA2 CrtcHBlankEnd: 1328
[ 60.107] (II) CHROME(0): IGA2 CrtcHSyncStart: 1072
[ 60.107] (II) CHROME(0): IGA2 CrtcHSyncEnd: 1176
[ 60.107] (II) CHROME(0): IGA2 CrtcVTotal: 798
[ 60.107] (II) CHROME(0): IGA2 CrtcVDisplay: 768
[ 60.107] (II) CHROME(0): IGA2 CrtcVBlankStart: 768
[ 60.107] (II) CHROME(0): IGA2 CrtcVBlankEnd: 798
[ 60.107] (II) CHROME(0): IGA2 CrtcVSyncStart: 771
[ 60.107] (II) CHROME(0): IGA2 CrtcVSyncEnd: 775
[ 60.107] (II) CHROME(0): Exiting viaIGA2SetDisplayRegister.
[ 60.107] (II) CHROME(0): ViaSetSecondaryFIFO
[ 60.107] (II) CHROME(0): ViaSetDotclock to 0x04704d
[ 60.107] (II) CHROME(0): ViaSetUseExternalClock
[ 60.107] (II) CHROME(0): Entered viaIGA2SetFBStartingAddress.
[ 60.107] (II) CHROME(0): Base Address: 0x0
[ 60.107] (II) CHROME(0): DRI Base Address: 0x60000
[ 60.107] (II) CHROME(0): CR62: 0x00
[ 60.107] (II) CHROME(0): CR63: 0x00
[ 60.107] (II) CHROME(0): CR64: 0x0C
[ 60.107] (II) CHROME(0): CRA3: 0x00
[ 60.107] (II) CHROME(0): Exiting viaIGA2SetFBStartingAddress.
[ 60.107] (II) CHROME(0): Entered viaIGA2DisplayChannel.
[ 60.107] (II) CHROME(0): IGA2 Display Channel: On
[ 60.107] (II) CHROME(0): Exiting viaIGA2DisplayChannel.
[ 60.107] (II) CHROME(0): Entered viaIGA2HWReset.
[ 60.107] (II) CHROME(0): IGA2 HW Reset: Off
[ 60.107] (II) CHROME(0): Exiting viaIGA2HWReset.
[ 60.107] (II) CHROME(0): Exiting iga2_crtc_mode_set.
[ 60.107] (II) CHROME(0): Entered viaDFPLowSetDisplaySource.
[ 60.107] (II) CHROME(0): DFP Low Display Output Source: IGA2
[ 60.107] (II) CHROME(0): Exiting viaDFPLowSetDisplaySource.
[ 60.107] (II) CHROME(0): Entered viaDFPHighSetDisplaySource.
[ 60.107] (II) CHROME(0): DFP High Display Output Source: IGA2
[ 60.107] (II) CHROME(0): Exiting viaDFPHighSetDisplaySource.
[ 60.107] (II) CHROME(0): Entering iga2_crtc_gamma_set.
[ 60.107] (II) CHROME(0): Entered viaIGA2SetPaletteLUTResolution.
[ 60.107] (II) CHROME(0): IGA2 Palette LUT Resolution: 8 bit
[ 60.107] (II) CHROME(0): Exiting viaIGA2SetPaletteLUTResolution.
[ 60.107] (II) CHROME(0): Entered viaSetPaletteLUTAccess.
[ 60.107] (II) CHROME(0): Palette LUT Access: IGA2
[ 60.107] (II) CHROME(0): Exiting viaSetPaletteLUTAccess.
[ 60.107] (II) CHROME(0): VIALoadRgbLut
[ 60.107] (II) CHROME(0): Entered viaIGA2SetGamma.
[ 60.107] (II) CHROME(0): IGA2 Gamma Correction: Off
[ 60.107] (II) CHROME(0): Exiting viaIGA2SetGamma.
[ 60.107] (II) CHROME(0): Exiting iga2_crtc_gamma_set.
[ 60.107] (II) CHROME(0): Entering iga2_crtc_commit.
[ 60.107] (II) CHROME(0): Entered viaIGA2DisplayOutput.
[ 60.107] (II) CHROME(0): IGA2 Display Output: On
[ 60.107] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
[ 60.107] (II) CHROME(0): Exiting iga2_crtc_commit.
[ 60.107] (II) CHROME(0): Entered ViaLVDSPower.
[ 60.107] (II) CHROME(0): Integrated LVDS Flat Panel Power: On
[ 60.107] (II) CHROME(0): Exiting ViaLVDSPower.
[ 60.107] (II) CHROME(0): Entered viaFPIOPadSetting.
[ 60.107] (II) CHROME(0): SR12: 0x72
[ 60.107] (II) CHROME(0): SR13: 0x08
[ 60.107] (II) CHROME(0): Exiting viaFPIOPadSetting.
[ 60.107] (II) CHROME(0): Entered viaFPIOPadSetting.
[ 60.107] (II) CHROME(0): SR12: 0x72
[ 60.107] (II) CHROME(0): SR13: 0x08
[ 60.107] (II) CHROME(0): Exiting viaFPIOPadSetting.
[ 60.107] (II) CHROME(0): Entered via_analog_dpms.
[ 60.107] (II) CHROME(0): Entered viaAnalogOutput.
[ 60.108] (II) CHROME(0): Analog VGA Output: Off
[ 60.108] (II) CHROME(0): Exiting viaAnalogOutput.
[ 60.108] (II) CHROME(0): Exiting via_analog_dpms.
[ 60.108] (II) CHROME(0): ViaTVPower: Off.
[ 60.108] (II) CHROME(0): VT1622Power
[ 60.109] (II) CHROME(0): Entered iga1_crtc_dpms.
[ 60.109] (II) CHROME(0): Entered viaIGA1DPMSControl.
[ 60.109] (II) CHROME(0): Exiting viaIGA1DPMSControl.
[ 60.109] (II) CHROME(0): Exiting iga1_crtc_dpms.
[ 60.109] DRM memory allocation failed -6
[ 60.109] 635904 bytes of Linear memory allocated at 649000, handle 21750432
[ 60.113] (II) CHROME(0): Benchmarking video copy. Less time is better.
[ 60.123] (--) CHROME(0): Timed libc YUV420 copy... 6907403. Throughput: 146.0 MiB/s.
[ 60.131] (--) CHROME(0): Timed kernel YUV420 copy... 6911967. Throughput: 145.9 MiB/s.
[ 60.139] (--) CHROME(0): Timed SSE YUV420 copy... 6639258. Throughput: 151.9 MiB/s.
[ 60.148] (--) CHROME(0): Timed MMX YUV420 copy... 6787551. Throughput: 148.6 MiB/s.
[ 60.148] (--) CHROME(0): Ditching 3DNow! YUV420 copy. Not supported by CPU.
[ 60.156] (--) CHROME(0): Timed MMX2 YUV420 copy... 6737072. Throughput: 149.7 MiB/s.
[ 60.156] Freed 6590464 (pool 4)
[ 60.156] (--) CHROME(0): Using SSE YUV42X copy for video.
[ 60.156] (WW) CHROME(0): [XvMC] Cannot use XvMC without DRI!
[ 60.156] (WW) CHROME(0): Option "DRI" is not used
[ 60.156] (II) CHROME(0): - Done
[ 60.156] (II) Initializing extension Generic Event Extension
[ 60.157] (II) Initializing extension SHAPE
[ 60.157] (II) Initializing extension MIT-SHM
[ 60.158] (II) Initializing extension XInputExtension
[ 60.158] (II) Initializing extension XTEST
[ 60.159] (II) Initializing extension BIG-REQUESTS
[ 60.159] (II) Initializing extension SYNC
[ 60.160] (II) Initializing extension XKEYBOARD
[ 60.160] (II) Initializing extension XC-MISC
[ 60.160] (II) Initializing extension SECURITY
[ 60.161] (II) Initializing extension XFIXES
[ 60.161] (II) Initializing extension RENDER
[ 60.162] (II) Initializing extension RANDR
[ 60.163] (II) Initializing extension COMPOSITE
[ 60.163] (II) Initializing extension DAMAGE
[ 60.164] (II) Initializing extension MIT-SCREEN-SAVER
[ 60.164] (II) Initializing extension DOUBLE-BUFFER
[ 60.164] (II) Initializing extension RECORD
[ 60.165] (II) Initializing extension DPMS
[ 60.165] (II) Initializing extension Present
[ 60.166] (II) Initializing extension DRI3
[ 60.166] (II) Initializing extension X-Resource
[ 60.166] (II) Initializing extension XVideo
[ 60.167] (II) Initializing extension XVideo-MotionCompensation
[ 60.167] (II) Initializing extension GLX
[ 60.167] (II) AIGLX: Screen 0 is not DRI2 capable
[ 60.280] (II) IGLX: Loaded and initialized swrast
[ 60.280] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 60.280] (II) Initializing extension XFree86-VidModeExtension
[ 60.280] (II) Initializing extension XFree86-DGA
[ 60.281] (II) Initializing extension XFree86-DRI
[ 60.281] (II) Initializing extension DRI2
[ 60.281] (II) CHROME(0): Setting screen physical size to 270 x 203
[ 60.281] (II) CHROME(0): Entered via_xf86crtc_resize.
[ 60.281] (II) CHROME(0): Now attempting to resize the screen . . .
[ 60.281] (II) CHROME(0): It was determined that there is no need to resize the screen.
[ 60.281] (II) CHROME(0): Exiting via_xf86crtc_resize.
[ 60.381] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 60.381] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 60.381] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 60.381] (**) Power Button: Applying InputClass "system-keyboard"
[ 60.382] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 60.382] (II) LoadModule: "libinput"
[ 60.382] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 60.385] (II) Module libinput: vendor="X.Org Foundation"
[ 60.385] compiled for 1.19.6, module version = 0.27.1
[ 60.385] Module class: X.Org XInput Driver
[ 60.385] ABI class: X.Org XInput driver, version 24.1
[ 60.385] (II) Using input driver 'libinput' for 'Power Button'
[ 60.385] (**) Power Button: always reports core events
[ 60.385] (**) Option "Device" "/dev/input/event4"
[ 60.386] (**) Option "_source" "server/udev"
[ 60.386] (II) event4 - Power Button: is tagged by udev as: Keyboard
[ 60.387] (II) event4 - Power Button: device is a keyboard
[ 60.387] (II) event4 - Power Button: device removed
[ 60.403] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4"
[ 60.403] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 60.403] (**) Option "xkb_model" "pc105"
[ 60.403] (**) Option "xkb_layout" "gb"
[ 60.403] (WW) Option "xkb_variant" requires a string value
[ 60.403] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 60.441] (II) event4 - Power Button: is tagged by udev as: Keyboard
[ 60.441] (II) event4 - Power Button: device is a keyboard
[ 60.442] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 60.442] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 60.442] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 60.442] (**) Video Bus: Applying InputClass "system-keyboard"
[ 60.442] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[ 60.442] (II) Using input driver 'libinput' for 'Video Bus'
[ 60.442] (**) Video Bus: always reports core events
[ 60.442] (**) Option "Device" "/dev/input/event5"
[ 60.442] (**) Option "_source" "server/udev"
[ 60.443] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 60.443] (II) event5 - Video Bus: device is a keyboard
[ 60.443] (II) event5 - Video Bus: device removed
[ 60.460] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input9/event5"
[ 60.460] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 60.460] (**) Option "xkb_model" "pc105"
[ 60.460] (**) Option "xkb_layout" "gb"
[ 60.460] (WW) Option "xkb_variant" requires a string value
[ 60.460] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 60.461] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 60.461] (II) event5 - Video Bus: device is a keyboard
[ 60.462] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 60.462] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 60.462] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 60.462] (**) Power Button: Applying InputClass "system-keyboard"
[ 60.462] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 60.462] (II) Using input driver 'libinput' for 'Power Button'
[ 60.462] (**) Power Button: always reports core events
[ 60.462] (**) Option "Device" "/dev/input/event2"
[ 60.462] (**) Option "_source" "server/udev"
[ 60.463] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 60.463] (II) event2 - Power Button: device is a keyboard
[ 60.463] (II) event2 - Power Button: device removed
[ 60.483] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event2"
[ 60.483] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 60.483] (**) Option "xkb_model" "pc105"
[ 60.483] (**) Option "xkb_layout" "gb"
[ 60.483] (WW) Option "xkb_variant" requires a string value
[ 60.483] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 60.484] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 60.484] (II) event2 - Power Button: device is a keyboard
[ 60.485] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 60.485] (II) No input driver specified, ignoring this device.
[ 60.485] (II) This device may have been added with another device file.
[ 60.487] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[ 60.487] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 60.487] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 60.487] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[ 60.487] (**) Logitech USB Optical Mouse: always reports core events
[ 60.487] (**) Option "Device" "/dev/input/event1"
[ 60.487] (**) Option "_source" "server/udev"
[ 60.540] (II) event1 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[ 60.540] (II) event1 - Logitech USB Optical Mouse: device is a pointer
[ 60.540] (II) event1 - Logitech USB Optical Mouse: device removed
[ 60.560] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/0003:046D:C077.0001/input/input5/event1"
[ 60.560] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
[ 60.560] (**) Option "AccelerationScheme" "none"
[ 60.560] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[ 60.561] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 60.561] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 60.614] (II) event1 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[ 60.615] (II) event1 - Logitech USB Optical Mouse: device is a pointer
[ 60.617] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 60.617] (II) No input driver specified, ignoring this device.
[ 60.617] (II) This device may have been added with another device file.
[ 60.619] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 60.620] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 60.620] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 60.620] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 60.620] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 60.620] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 60.620] (**) AT Translated Set 2 keyboard: always reports core events
[ 60.620] (**) Option "Device" "/dev/input/event0"
[ 60.620] (**) Option "_source" "server/udev"
[ 60.622] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 60.622] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 60.622] (II) event0 - AT Translated Set 2 keyboard: device removed
[ 60.636] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 60.636] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 60.636] (**) Option "xkb_model" "pc105"
[ 60.636] (**) Option "xkb_layout" "gb"
[ 60.637] (WW) Option "xkb_variant" requires a string value
[ 60.637] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 60.640] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 60.640] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 60.642] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event6)
[ 60.642] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 60.642] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "libinput touchpad catchall"
[ 60.642] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 60.642] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[ 60.642] (II) LoadModule: "synaptics"
[ 60.642] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 60.643] (II) Module synaptics: vendor="X.Org Foundation"
[ 60.643] compiled for 1.19.0, module version = 1.9.0
[ 60.643] Module class: X.Org XInput Driver
[ 60.643] ABI class: X.Org XInput driver, version 24.1
[ 60.643] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 60.643] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 60.643] (**) Option "Device" "/dev/input/event6"
[ 60.660] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (res 0)
[ 60.660] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (res 0)
[ 60.660] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 60.660] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[ 60.660] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 60.660] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[ 60.660] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
[ 60.660] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 60.660] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 60.680] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input13/event6"
[ 60.680] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 11)
[ 60.680] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 60.680] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
[ 60.680] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.156
[ 60.680] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 60.680] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 60.680] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 60.681] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 60.681] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 60.682] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[ 60.682] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[ 60.698] (II) CHROME(0): Entered iga2_crtc_dpms.
[ 60.698] (II) CHROME(0): Entered viaIGA2DisplayOutput.
[ 60.698] (II) CHROME(0): IGA2 Display Output: On
[ 60.698] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
[ 60.698] (II) CHROME(0): Exiting iga2_crtc_dpms.
[ 60.698] (II) CHROME(0): Entered ViaLVDSPower.
[ 60.698] (II) CHROME(0): Integrated LVDS Flat Panel Power: On
[ 60.698] (II) CHROME(0): Exiting ViaLVDSPower.
[ 60.698] (II) CHROME(0): Entered viaFPIOPadSetting.
[ 60.698] (II) CHROME(0): SR12: 0x72
[ 60.698] (II) CHROME(0): SR13: 0x08
[ 60.698] (II) CHROME(0): Exiting viaFPIOPadSetting.
[ 68.895] (II) event4 - Power Button: device removed
[ 68.940] (II) event5 - Video Bus: device removed
[ 68.963] (II) event2 - Power Button: device removed
[ 68.998] (II) event1 - Logitech USB Optical Mouse: device removed
[ 69.133] (II) event0 - AT Translated Set 2 keyboard: device removed
[ 69.157] (II) CHROME(0): Entered iga2_crtc_dpms.
[ 69.157] (II) CHROME(0): Entered viaIGA2DisplayOutput.
[ 69.157] (II) CHROME(0): IGA2 Display Output: On
[ 69.157] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
[ 69.157] (II) CHROME(0): Exiting iga2_crtc_dpms.
[ 69.157] (II) CHROME(0): Entered ViaLVDSPower.
[ 69.157] (II) CHROME(0): Integrated LVDS Flat Panel Power: On
[ 69.157] (II) CHROME(0): Exiting ViaLVDSPower.
[ 69.157] (II) CHROME(0): Entered viaFPIOPadSetting.
[ 69.157] (II) CHROME(0): SR12: 0x72
[ 69.157] (II) CHROME(0): SR13: 0x08
[ 69.157] (II) CHROME(0): Exiting viaFPIOPadSetting.
[ 69.157] (II) UnloadModule: "synaptics"
[ 69.158] (II) UnloadModule: "libinput"
[ 69.158] (II) UnloadModule: "libinput"
[ 69.158] (II) UnloadModule: "libinput"
[ 69.158] (II) UnloadModule: "libinput"
[ 69.158] (II) UnloadModule: "libinput"
[ 69.159] (II) CHROME(0): VIACloseScreen
[ 69.161] Freed 6291456 (pool 4)
[ 69.161] Freed 6553728 (pool 4)
[ 69.161] (II) CHROME(0): VIALeaveVT
[ 69.161] (II) CHROME(0): VT162xRestore
[ 69.556] (II) CHROME(0): Entered ViaLCDPower.
[ 69.560] (II) CHROME(0): Integrated LVDS Flat Panel Power: On
[ 69.560] (II) CHROME(0): Exiting ViaLCDPower.
[ 69.560] (II) CHROME(0): Entered viaIGA1Restore.
[ 69.561] (II) CHROME(0): Restoring sequencer registers.
[ 69.561] (II) CHROME(0): Finished restoring sequencer registers.
[ 69.561] (II) CHROME(0): Restoring IGA1 registers.
[ 69.561] (II) CHROME(0): Finished restoring IGA1 registers.
[ 69.561] (II) CHROME(0): ViaDisablePrimaryFIFO
[ 69.561] (II) CHROME(0): Exiting viaIGA1Restore.
[ 69.561] (II) CHROME(0): Entered iga2_crtc_restore.
[ 69.561] (II) CHROME(0): Entered viaIGA2Restore.
[ 69.562] (II) CHROME(0): Restoring IGA2 registers.
[ 69.562] (II) CHROME(0): Finished restoring IGA2 registers.
[ 69.562] (II) CHROME(0): Exiting viaIGA2Restore.
[ 69.562] (II) CHROME(0): Exiting iga2_crtc_restore.
[ 69.562] Freed 6557696 (pool 4)
[ 69.562] Freed 6574080 (pool 4)
[ 69.562] Freed 3145728 (pool 4)
[ 69.590] (II) Server terminated successfully (0). Closing log file.
Your can find some known options here
Create a .conf file like the example at the link and add
Option "DRI"
in the Device section. (because of a warning in your xorg log).
If you still have problems, at least try to provide inxi -SGxxz
In order to downgrade, the xf86-video-openchrome must be removed because of conflict. Shall I really do that?
Like this below?
Section "Device"
Identifier "My Device Name"
Driver "openchrome"
Option "DRI"
EndSection
What do I put in My Device Name ?
It doesn't matter. Write "Device0" or "ViaSomeNumber"
Somehow I have borked the system, when trying to chroot I get:
'==> Error: Can't create chroot on non-directory'
But! This very same Manjaro installation I have on a cloned HDD from February. It fully works, I have checked. So I could run update, get the black screen again, and start all over from scratch to try to fix it. Or, is there a safe way to update?
There is the command called downgrade. It lets you select from different versions of e.g. xorg, mesa, xf86-video-openchrome. This way you could find the combo wich works and from which on it stops to work.
With pacman -Qi you can find which versions you have on your backup from february.
Pacman wants to update following:
xf86-video-vesa 2.3.4-4 -> 2.4.0-2.0
xorg 1.19.6-2.1 -> 1.20.0-2.0
mesa 17.3.2-2.0 -> 18.0.4-1.0
openchrome is not installed, but the version available is 0.6.0-2
I used the downgrade command earlier on this journey, but to no avail.
There are several versions inbetween, you ought to try them out systematically. Post the output of downgrade command. I would try backwards from xorg-server below 1.20.0-1 and the corresponding video-vesa and maybe mesa.
(However, once again, it could be irrelevant, but I've given up my attemts to make majaro work on my Via VX800 machine. To many moving parts.)
Forum kindly sponsored by
